Fiber Reinforced Shape-Memory Polymer Composite and Its Application in Deployable Hinge in Space

Xin Lan,Yanju Liu,Haibao Lv,Xiaohua Wang,Jinsong Leng,Shanyi Du

DOI: https://doi.org/10.2514/6.2011-2115

2011-01-01

Abstract:This paper investigates the shape recovery behaviors of shape-memory polymer composite (SMPC) reinforced by carbon fiber fabrics, and demonstrates the feasibility to use SMPC hinge as a deployable structure in space. The major advantages of shape memory polymers (SMPs) are their extremely high recovery strain, low density and low cost, etc. However, relatively low modulus and low strength are their intrinsic drawbacks. Fiber reinforced SMPC which may overcome the above-mentioned disadvantages is studied here. The fiber microbuckling is the primary deformation mechanism in bending of SMPC, and it ensures that the SMPC can achieve high packaging strain and avoid fiber failure. With the microbuckling, SMPC materials are suitable to be used in deployable structure components because of their high strain-to-failure capability. Based on the actuation of fiber reinforced SMPC in large deflection deformation, we discuss its mechanism which is required for design principle for deployable structure. The local post-microbuckling is required for the unidirectional fiber reinforced composite materials, at the conditions of its large geometrical deflection. The SMPC shell shows a linear bending stiffness when recovering. It implies that SMPC is a good candidate material for deployable structures. Moreover, a SMPC hinge is fabricated, and then a prototype of solar array deploys successfully actuated by the SMPC hinge.