Abstract:In this paper, four conductive polyaniline powders doped in hydrochloric acid, sulfuric acid, phosphoric acid, and sulfonic acid were selected and blended with polydimethylsiloxane to prepare coatings with an electromagnetic absorption effect and fouling desorption effect, respectively. A UV spectrophotometer was used to evaluate the settling rate of the powders. Fourier transform infrared spectrometry, laser confocal microscopy, and scanning electron microscopy were used to observe the morphology and structure of the powder and the coating. The interface properties of the coatings were characterized using a contact angle measurement, the mechanical properties of the coatings using a tensile test, and the electromagnetic properties of the powders and microwave absorption properties of the coatings using vector network analyzers. Meanwhile, the antifouling performance of the coatings was evaluated via the marine bacteria adhesion test and benthic diatom adhesion test, and the effect of conductive polyaniline on the antifouling performance of the coating was analyzed. The results show that adding polyaniline reduced the surface energy of the coating and increased the roughness, mechanical properties and anti-fouling properties of the coating. Moreover, adding appropriate polyaniline powder can enhance the electromagnetic wave loss of the coating. The followings values were recorded for a hydrochloric-acid-doped polyaniline coating: lowest surface energy of 17.17 mJ/m2, maximum fracture strength of 0.95 MPa, maximum elongation of 155%, maximum bandwidth of 3.81 GHz, and peak of reflection loss of −23.15 dB. The bacterial detachment rate of the polydimethylsiloxane (PDMS) samples was only 30.37%. The bacterial adhesion rates of the composite coating containing hydrochloric-acid-doped polyaniline were 4.95% and 2.72% after rinsing and washing, respectively, and the desorption rate was 45.35%. The chlorophyll concentration values were 0.0057 mg/L and 0.0028 mg/L, respectively, and the desorption rate was 54.62%.

Protective Performance of Water-Based Epoxy Coating Containing ScCO2 Synthesized Self-Doped Nanopolyaniline

Construction of a high-performance anti-corrosion epoxy coating in the presence of poly(aniline-co-pyrrole) nanospheres

Anticorrosive Properties of Epoxy Resin Coatings Cured by Aniline/p‐phenylenediamine Copolymer

Preparation of polyaniline‐aniline modified silicon dioxide composite with synergistic anticorrosion effect for waterborne epoxy anticorrosive coatings

Preparation and anti‐corrosion performance of nano Polyaniline/Polyurethane interpenetrating network composite coating

Gum Arabic-Assisted Polyaniline Nanofillers for Improving Anticorrosion Performance of Waterborne Epoxy Coatings

Conducting Polyaniline Nanoparticles And Their Dispersion For Waterborne Corrosion Protection Coatings

Preparation of Polyaniline/Epoxy Composite and Its Anti- Corrosion Performance

Preparation of Doped-Polyaniline and Its Application in Waterborne Anticorrosive and Antistatic Epoxy Coatings

Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by Polyaniline Nanorods and Nitrogen and Fluorine Dual-Doped Graphene Oxide Composites

The Effect of Conductive Polyaniline on the Anti-Fouling and Electromagnetic Properties of Polydimethylsiloxane Coatings

Polyaniline/Epoxy Composite Emulsion Coatings for Anticorrosion to Mild Steel

Facile Preparation of Polyaniline Nanoparticles and Their Dispersion for Waterborne Anticorrosion Coatings

Grafting of polyaniline onto polydopamine-wrapped carbon nanotubes to enhance corrosion protection properties of epoxy coating

Corrosion Pr otective Performance of PAN/Epoxy Hybrid Cathodic Electrodeposition Coatings

Eco-Friendly AMPS-Doped Polyaniline/Urethane-Methacrylate Coating as a Corrosion Protection Coating: Electrochemical, Surface, Theoretical, and Thermodynamic Studies

Halloysite@Polyaniline Nanoparticles Loaded with the Praseodymium (III) Cation for Improving Active Corrosion Protection of Waterborne Epoxy Coating

Preparation and Characterization of Graphene Oxide/Carbon Nanotube/Polyaniline Composite and Conductive and Anticorrosive Properties of Its Waterborne Epoxy Composite Coatings

Designing a smart epoxy anti-corrosion coating loaded with molybdate-doped polythiophene nano-hybrid self-assembled multi-walled carbon nanotube

Synthesis and characterization of polyaniline/nanodiamond hybrid nanostructures with various morphologies to enhance the corrosion protection performance of epoxy coating

Anticorrosive performance of waterborne epoxy coatings containing water-dispersible hexagonal boron nitride (h-BN) nanosheets