Relationship between bone mineral density and tooth loss in elderly Japanese women.

Akira Taguchi,Y. Suei,M. Ohtsuka,K. Otani,K. Tanimoto,L. Hollender

DOI: https://doi.org/10.1038/SJ/DMFR/4600445

1999-06-13

Dentomaxillofacial Radiology

Abstract:

What problem does this paper attempt to address?

Predicting Enr'S Construction Cost Index Using The Modified K Nearest Neighbors (Knn) Algorithm

Jun Wang,Baabak Ashuri

DOI: https://doi.org/10.1061/9780784479827.249

2016-01-01

Abstract:Construction cost index (CCI) is calculated monthly and published by Engineering News Record (ENR). It is the weighted average price of four major construction components from twenty cities in the U.S., and it generally represents the level of cost for the construction industry. It has, therefore, been widely used for cost estimation, bid preparation, and investment planning. Cost estimators and investment planners, however, are not only interested in the CCI at present, but are also interested in forecasting and predicting the value of CCI in near future. Although CCI increases over the long term, it is subject to considerable short-term volatilities, which make it problematic for cost estimators to accurately bid for construction projects. The accurate prediction of the construction cost can result in more accurate bids and avoid underestimation or overestimation. This paper presents a method that utilizes economic variables to predict CCI by applying the modified K nearest neighbors (KNN) algorithm. It first identifies several economic variables that are highly correlated to CCI and collects the data for the period from 1994 to 2013. Then it splits the data into two parts: the first 95% of the data as the training set and the last 5% of the data as the test set. Finally, prediction models are developed by the training sets and tested on the test set to measure the prediction performance. Experimental results show that the modified KNN algorithm yields very small prediction error under the given dataset. It is anticipated that the proposed method will be useful for predicting CCI and several other construction time series indices in the short term.
Predicting ENR Construction Cost Index Using Machine-Learning Algorithms

Jun Wang,Baabak Ashuri

DOI: https://doi.org/10.1080/15578771.2016.1235063

2016-01-01

International Journal of Construction Education and Research

Abstract:Construction Cost Index (CCI) is calculated monthly and published by Engineering News-Record (ENR). CCI is utilized for capital project budgeting and construction cost estimation, especially in cases where mid- and long-term forecasts are needed. Accurate prediction of CCI helps avoid underestimating and overestimating project costs but the current prevailing time series prediction models do not show promising results, especially in mid- and long-term forecasting. The capability of two machine-learning algorithms, k nearest neighbor (k-NN) and perfect random tree ensembles (PERT), are utilized to enhance CCI forecasting, especially in the mid- and long-term. The proposed machine-learning algorithms are able to significantly enhance the predictability of forecasting CCI in all the scenarios, short-, mid-, and long-term. Data from January 1985 to December 2014 is collected from ENR and bureau of labor statistics to conduct empirical studies and quantitatively measure the performance of the proposed methods. As the outcomes show, the prediction accuracies of both proposed methods are better than those of current prevailing time series models under all the tested scenarios. It is anticipated that cost estimators can benefit from CCI forecasting by incorporating predicted price variations in their estimates and preparing more-precise bids for contractors and developing more-accurate budgets for owners.
Spatial Variation of Construction Land Expansion in China: Based on EBI and EBIi

YANG Yang,WU Ci-fang,WEI Shi-chuan,ZHENG Juan-er

DOI: https://doi.org/10.3969/j.issn.1001-8158.2008.01.004

2008-01-01

Abstract:The purpose of this study is to analyze the spatial variation of construction land expansion in China.Methods of spatial autocorrelation indicators adjusted by Empirical Bayes and Spatial Error Model were employed.The results indicate that the countrywide construction land expansion showed obvious spatial cluster pattern;the spatial transfer of clusters and outliers showed definite rules;the construction land expansion showed obvious local spatial disparity pattern;the growth rate of secondary industry and non-agricultural population were strong driving forces on the construction land expansion.In conclusion,the traditional approaches,in which each region is treated as independent ones,cannot tell the spatial variation of spatial items.The EBI and EBIi,which can avoid the variation instability effectively,are good methods to achieve quantitative analysis of the spatial variation of construction land expansion in China.
Covariate-distance Weighted Regression (CWR): A Case Study for Estimation of House Prices

Hone-Jay Chu,Po-Hung Chen,Sheng-Mao Chang,Muhammad Zeeshan Ali,Sumriti Ranjan Patra

DOI: https://doi.org/10.48550/arXiv.2305.08887

IF: 5.414

2023-05-15

Machine Learning

Abstract:Geographically weighted regression (GWR) is a popular tool for modeling spatial heterogeneity in a regression model. However, the current weighting function used in GWR only considers the geographical distance, while the attribute similarity is totally ignored. In this study, we proposed a covariate weighting function that combines the geographical distance and attribute distance. The covariate-distance weighted regression (CWR) is the extension of GWR including geographical distance and attribute distance. House prices are affected by numerous factors, such as house age, floor area, and land use. Prediction model is used to help understand the characteristics of regional house prices. The CWR was used to understand the relationship between the house price and controlling factors. The CWR can consider the geological and attribute distances, and produce accurate estimates of house price that preserve the weight matrix for geological and attribute distance functions. Results show that the house attributes/conditions and the characteristics of the house, such as floor area and house age, might affect the house price. After factor selection, in which only house age and floor area of a building are considered, the RMSE of the CWR model can be improved by 2.9%-26.3% for skyscrapers when compared to the GWR. CWR can effectively reduce estimation errors from traditional spatial regression models and provide novel and feasible models for spatial estimation.
Modeling urban growth using spatially heterogeneous cellular automata models: Comparison of spatial lag, spatial error and GWR

Chen Gao,Yongjiu Feng,Xiaohua Tong,Zhenkun Lei,Shurui Chen,Shuting Zhai

DOI: https://doi.org/10.1016/j.compenvurbsys.2020.101459

2020-05-01

Abstract:Many methods can be used to construct geographical cellular automata (CA) models of urban land use, but most do not adequately capture spatial heterogeneity in urban dynamics. Spatial regression is particularly appropriate to address the problem to reproduce urban patterns. To examine the advantages and disadvantages of spatial regression, we compare a spatial lag CA model (SLM-CA), a spatial error CA model (SEM-CA) and a geographically-weighted regression CA model (GWR-CA) by simulating urban growth at Nanjing, China. Each CA model is calibrated from 1995 to 2005 and validated from 2005 to 2015. Among these, SLM and SEM are spatial autoregressive (SAR) models that consider spatial autocorrelation of urban growth and yield highly similar land transition probability maps. Both SAR-CA and GWR-CA accurately reproduce urban growth at Nanjing during the calibration and validation phases, yielding overall accuracies (OAs) exceeding 94% and 85%, respectively. SAR-CA is superior in simulating urban growth when measured by OA and figure-of-merit (FOM) while GWR-CA is superior regarding the ability to address spatial heterogeneity. A concentric ring buffer-based assessment shows OA valleys that correspond to FOM peaks, where the ranges of valleys and peaks indicate the areas with active urban development. By comparison, SAR-CA captures more newly-urbanized patches in highly-dense urban areas and shows better performance in terms of simulation accuracy; whereas, GWR-CA captures more in the suburbs and shows better ability to address spatial heterogeneity. Our results demonstrate that spatial regression can help produce accurate simulations of urban dynamics featured by spatial heterogeneity, either implicitly or explicitly. Our work should help select appropriate CA models of urban growth in different terrain and socioeconomic contexts.
Geographically Weighted Regression Analysis for Spatial Economics Data: a Bayesian Recourse

Zhihua Ma,Yishu Xue,Guanyu Hu

DOI: https://doi.org/10.48550/arXiv.2007.02222

2020-07-05

Abstract:The geographically weighted regression (GWR) is a well-known statistical approach to explore spatial non-stationarity of the regression relationship in spatial data analysis. In this paper, we discuss a Bayesian recourse of GWR. Bayesian variable selection based on spike-and-slab prior, bandwidth selection based on range prior, and model assessment using a modified deviance information criterion and a modified logarithm of pseudo-marginal likelihood are fully discussed in this paper. Usage of the graph distance in modeling areal data is also introduced. Extensive simulation studies are carried out to examine the empirical performance of the proposed methods with both small and large number of location scenarios, and comparison with the classical frequentist GWR is made. The performance of variable selection and estimation of the proposed methodology under different circumstances are satisfactory. We further apply the proposed methodology in analysis of a province-level macroeconomic data of 30 selected provinces in China. The estimation and variable selection results reveal insights about China's economy that are convincing and agree with previous studies and facts.

Applications
Spatial Autoregressive Model for Population Estimation at the Census Block Level Using LIDAR-derived Building Volume Information

Fang Qiu,Harini Sridharan,Yongwan Chun

DOI: https://doi.org/10.1559/152304010792194949

IF: 2.354

2010-01-01

Cartography and Geographic Information Science

Abstract:The collection of population by census is laborious, time consuming and expensive, and often only available at limited temporal and spatial scales. Remote sensing based population estimation has been employed as a viable alternative for providing population estimates based on indicators that make use of two-dimensional areal information of buildings or one-dimensional length information of roads The recent advancement of LIDAR remote sensing provides the opportunity to add the third dimension of height information into the modeling of population distribution. This study explores the use of building volumes derived from LIDAR as a population indicator. Our study shows the volume-based model consistently outperforms area and length-based models at the census block level. Additionally, the study examines the impact of spatial autocorrelation, the presence of which violates the independence assumption of the traditional OLS models. To address this problem, a spatial autoregressive model is employed to account for the spatial autocorrelation in the regression residuals. By incorporating the spatial pattern, the volume-based spatial error model achieves a goodness of fit (R2) of 85 percent, with a significant improvement in model performance and estimation accuracies in comparison with its OLS counterpart. The study confirms building volume as a more valuable indicator and estimator for block level population distribution, especially if an appropriate spatial autoregressive model is adopted.

geography
A Case Study in China Using Multiscale Geographically Weighted Regression

Sihan Liu,Xinyi Niu

DOI: https://doi.org/10.3390/ijgi13040129

IF: 3.4

2024-04-13

ISPRS International Journal of Geo-Information

Abstract:In the current field of regional studies, there is a growing focus on regional spatial relationships from the perspective of functional linkages between cities. Inter-city population movement serves as an embodiment of the integrated functionality of cities within a region, and this is closely tied to the socio-economic development of urban areas. This study utilized Location-Based Services (LBSs) to collect the scale of inter-city population movement across 355 cities in China. Additionally, socio-economic data published by local governments were incorporated. By establishing a Multiscale Geographically Weighted Regression (MGWR) model, this research explores the spatial relationships between inter-city population movement and socio-economic influencing factors in China. This study aims to elucidate the spatial scales of the relationships between various variables. Our research findings indicate that the relationship between inter-city population movement and potential socio-economic determinants exhibits spatial non-stationarity. It is better to explore this spatial relationship through the MGWR model as there are different determinants operating on inter-city population movement at different spatial scales. The spatial distribution of the coefficient estimates shows significant regional differences and numerical variations. In China's economically developed coastal regions, there is relatively balanced development among cities, with advanced manufacturing and producer service industries acting as significant drivers of mobility. In inland regions of China, city size is the most influential variable, directing a substantial flow of human and economic resources towards regional socio-economic hubs such as provincial capitals. The main contribution of this study is the re-examination of the relationship between inter-city population movement and socio-economic factors from the perspective of spatial scales. This approach will help China to consider the heterogeneity of different regions more extensively when formulating regional development policies, thereby facilitating the targeted promotion of regional element flow.

geography, physical,remote sensing,computer science, information systems
A modified spatial house price to income ratio and housing affordability drivers study: using the post-LASSO approach

Qifeng Wang,Bofan Lin,Consilz Tan

DOI: https://doi.org/10.1108/ijhma-12-2023-0169

2024-05-18

International Journal of Housing Markets and Analysis

Abstract:Purpose The purpose of this paper is to develop an index for measuring urban house price affordability that integrates spatial considerations and to explore the drivers of housing affordability using the post-least absolute shrinkage and selection operator (LASSO) approach and the ordinary least squares method of regression analysis. Design/methodology/approach The study is based on time-series data collected from 2005 to 2021 for 256 prefectural-level city districts in China. The new urban spatial house-to-price ratio introduced in this study adds the consideration of commuting costs due to spatial endowment compared to the traditional house-to-price ratio. And compared with the use of ordinary economic modelling methods, this study adopts the post-LASSO variable selection approach combined with the k-fold cross-test model to identify the most important drivers of housing affordability, thus better solving the problems of multicollinearity and overfitting. Findings Urban macroeconomics environment and government regulations have varying degrees of influence on housing affordability in cities. Among them, gross domestic product is the most important influence. Research limitations/implications The paper provides important implications for policymakers, real estate professionals and researchers. For example, policymakers will be able to design policies that target the most influential factors of housing affordability in their region. Originality/value This study introduces a new urban spatial house price-to-income ratio, and it examines how macroeconomic indicators, government regulation, real estate market supply and urban infrastructure level have a significant impact on housing affordability. The problem of having too many variables in the decision-making process is minimized through the post-LASSO methodology, which varies the parameters of the model to allow for the ranking of the importance of the variables. As a result, this approach allows policymakers and stakeholders in the real estate market more flexibility in determining policy interventions. In addition, through the k-fold cross-validation methodology, the study ensures a high degree of accuracy and credibility when using drivers to predict housing affordability.
Research on Forecasting the Cost of Residential Construction Based on PCA and LS-SVM

Zhongfu Qin,Xiaolong Lei,Liqing Meng

DOI: https://doi.org/10.2991/emcm-15.2016.17

2016-01-01

Abstract:To forecast the costs of a residential construction rapidly and accurately in the initial stage of construction and lack of relevant information. Based on the strengths and weaknesses of previous studies about it, a new model to forecast the costs of a residential construction which is based on Principal Component Analysis (PCA) and Least Squares Support Vector Machine (LS-SVM) is proposed. First based on the factors analysis in the costs of a residential construction, chooses the indicators and samples of residential construction for the prediction of the Construction Costs, after which submits the selected indicators data to the Principal Component Analysis(PCA) to eliminate the Correlation in it; then, the new indicators data is imported into the Least Squares Support Vector Machine (LS-SVM) and training in it to build a new model to forecast the costs of a residential construction. Finally, selects 5 projects in conjunction with the new model for simulation analysis, the relative error are controlled within±7%.
Impact of travel time uncertainties on modeling of spatial accessibility: a comparison of street data sources

Yan Lin,Christopher Lippitt,Daniel Beene,Joseph Hoover

DOI: https://doi.org/10.1080/15230406.2021.1960609

IF: 2.354

2021-09-01

Cartography and Geographic Information Science

Abstract:GIS-based spatial access measures have been used extensively to monitor social equity and to help develop policy. However, inherent uncertainties in the road datasets used in spatial access estimates remain largely underreported. These uncertainties might result in unrecognized biases within visualization products and decision-making outcomes that strive to improve social equity based on seemingly egalitarian accessibility metrics. To better understand and address these uncertainties, we evaluated variations in travel impedance for car and bus transportation using proprietary, volunteer-information-based, and free (non-volunteer-information-based) street networks. We then interpreted the measured variations through the lens of street data uncertainty and its propagation in a common E2SFCA model of spatial accessibility. Results indicated that travel impedance disagreement propagates through the modeling process to effect agreement of spatial access index (SPAI) estimates among different street sources, with larger uncertainties observed for bus travel than car travel. Higher impedance coefficients (β), a model parameter, reduced the impact of street-source variations on estimates. Less urbanized regions were found to experience higher street-source variations when compared with the core-metropolitan area. We also demonstrated that a relative spatial access measure – the spatial access ratio (SPAR) – reduced uncertainties introduced by the choice of street datasets. Careful selection of reliable street sources and model parameters (e.g. higher β), as well as consideration of the potential for bias, particularly for less urbanized areas and areas reliant on public transportation, is warranted when leveraging SPAI to inform policy. When reliable/accurate road network data are not accessible or data quality information is not available, the SPAR is a suitable alternative or supplement to SPAI for visualization and analyses.

geography
Inferring the contiguity matrix for spatial autoregressive analysis with applications to house price prediction

Somwrita Sarkar,Sanjay Chawla

DOI: https://doi.org/10.48550/arXiv.1607.01999

2016-07-07

Abstract:Inference methods in traditional statistics, machine learning and data mining assume that data is generated from an independent and identically distributed (iid) process. Spatial data exhibits behavior for which the iid assumption must be relaxed. For example, the standard approach in spatial regression is to assume the existence of a contiguity matrix which captures the spatial autoregressive properties of the data. However all spatial methods, till now, have assumed that the contiguity matrix is given apriori or can be estimated by using a spatial similarity function. In this paper we propose a convex optimization formulation to solve the spatial autoregressive regression (SAR) model in which both the contiguity matrix and the non-spatial regression parameters are unknown and inferred from the data. We solve the problem using the alternating direction method of multipliers (ADMM) which provides a solution which is both robust and efficient. While our approach is general we use data from housing markets of Boston and Sydney to both guide the analysis and validate our results. A novel side effect of our approach is the automatic discovery of spatial clusters which translate to submarkets in the housing data sets.

General Economics
Travel distance and land use: a generalized Box–Cox model with conditional spatial lag dependence

Jason Hawkins,Khandker Nurul Habib

DOI: https://doi.org/10.1080/23249935.2020.1831649

2020-10-13

Abstract:Disentangling individual contributions to travel distance continues to be an active field of research, with advances in econometrics being germane. In this study, we focus on several econometric techniques, some of which have been applied in isolation in past studies, but the combination of which has yet to be applied to the problem. We apply a series of statistical tests using the method of artificial regression to test the joint effects of functional form and spatial autocorrelation on model fit. An empirical application is made to the Greater Toronto Area using a large-scale travel survey. Several results found in past studies are refuted through the use of advanced econometric methods, including the previous finding of a positive correlation between travel distance and density in the study region. Model results are validated using bootstrapped sampling and local indicators of spatial association.
Assessment and Contributing Factors of the Spatial Misallocation of Construction Land: A Case Study of Shandong, China

Shaoxing Li,Huixi Cao,Jinyan Wang,Xinxin Wang

DOI: https://doi.org/10.3389/fenvs.2022.957013

IF: 5.411

2022-07-13

Frontiers in Environmental Science

Abstract:Spatial misallocation is an essential reason for the low utilization efficiency of construction land. Optimizing the spatial pattern of construction land allocation can improve the efficiency of economic operations and resilience to food crisis and climate change challenges. This study constructs a quantitative measurement method for the spatial misallocation of construction land (SMCL), proposes a new government market society support (GMSS) analytical framework for the contributing factors with interlocked relationships, and conducts empirical research in Shandong, China, which is a typical area with a rapid development of construction land and significant regional disparity. It is concluded that the SMCL ensues through the interaction and coevolution of the GMSS system, which plays a key role in adjusting the construction land use sequence, structure, and efficiency under the regulation of the upper government. Effectively using the estimation method based on the equal marginal output principle, the SMCL in Shandong is established as a downward trend, with evident temporal and spatial differentiation characteristics and spatial morphological mode changes, although most sub-regions are significantly approaching the adaptation interval with fluctuation. Furthermore, the empirical results of the regression model indicate that there are different effects and intensities on the SMCL among the contributing factors under the GMSS framework, wherein the local government force has an aggravating and the greatest effect, the market forces have a dual and second-ranking effect, the social forces play a positive but still weak role, and the support system has a differentiated improvement effect. However, the impacts of various dimensional factors on the SMCL also have heterogeneity in the development stages and different regions. Generally, in the low-level development stage and underdeveloped areas, the effect of local government intervention is stronger, the market forces' importance is lower, and the social forces and support systems remain insufficiently robust.

environmental sciences
PATH SELECTION OF SPATIAL ECONOMETRIC MODEL FOR MASS APPRAISAL OF REAL ESTATE: EVIDENCE FROM YINCHUAN, CHINA

Yu Zhao,Xuejia Shen,Jian Ma,Miao Yu

DOI: https://doi.org/10.3846/ijspm.2023.20376

2023-11-27

International Journal of Strategic Property Management

Abstract:Urbanization, national economic growth, and China’s changing population structure have elevated the importance of real estate assessment in various contexts, including mortgage financing, secondary housing market transactions, and real estate tax reform. To address this need, this study employs a time-spatial double-fixed spatial cross-section data model as a mass appraisal tool to analyze the transaction price data of 429 ordinary residential houses in Xixia District, Yinchuan, China on April 1, 2022. Specifically, this study analyzes 7 spatial cross-section data models, discerning their interconnections. It devises an assignment technique that merges distance and characteristic variable rank into a unified indicator. The results explore spatial lag effects in real estate transaction price generation and assess the descriptive capabilities of different spatial cross-section data models.

management
Reducing spatial autocorrelation in the dynamic simulation of urban growth using eigenvector spatial filtering

Xinlei Yan,Yongjiu Feng,Xiaohua Tong,Pengshuo Li,Yilun Zhou,Peiqi Wu,Huan Xie,Yanming Jin,Peng Chen,Shijie Liu,Xiong Xv,Sicong Liu,Chao Wang

DOI: https://doi.org/10.1016/j.jag.2021.102434

IF: 7.5

2021-10-01

International Journal of Applied Earth Observation and Geoinformation

Abstract:In cellular automata (CA) based modeling of dynamic urban growth, non-spatial statistical approaches are usually affected by spatial autocorrelation and fail to describe the spatially non-stationary relationships between urban growth and its drivers. The eigenvector spatial filtering (ESF) is a representative method that can well estimate the regression coefficients in the presence of spatial autocorrelation. In this study, we developed two CA models based on the linear ESF (LESF) and the non-stationary ESF (NESF), of which LESF is featured by spatially stationary coefficients while NESF is featured by spatially varying coefficients. These two models were compared to a conventional logistic regression (LOGR) CA model. The three models (i.e. CALOGR, CALESF and CANESF) were used to simulate rapid urban growth in Suzhou between 2009, 2014 and 2019. The statistics suggest significant reduction in the spatial autocorrelation of the residuals in the CALESF and CANESF land transition maps, as well as an increase in the model reliability. The results show that compared with CALOGR, CALESF and CANESF respectively improved the overall accuracy by 2.0% and 2.2% in 2014, and improved by 0.4% and 0.7% in 2019; they also hit more new-urban-cells, respectively increasing the figure-of-merit (FOM) by 3.8% and 4.3% in 2014, 0.3% and 0.9% in 2019. All three models performed better when integrated spatial heterogeneity into the CA neighborhoods, increasing overall accuracy by over 1% and FOM by over 2%. We concluded that the ESF-based CA models can effectively derive spatially varying land transition rules to capture the urban dynamics, and more accurately predict urban growth featured by spatial autocorrelation.

remote sensing
Spatial-temporal Variation Analysis of the Economic Density of Urban Construction Land

WANG Hai-yan,PU Li-jie,ZHANG Jian,ZHU Ming,ZHAO Yan,FU Rong

DOI: https://doi.org/10.3969/j.issn.1001-8158.2012.04.008

2012-01-01

Abstract:The purpose of the study is to analyze the economic density of urban construction land in Jiangsu between 1998 and 2008,taking into account both the land and economic perspectives.It can provide the scientific basis for adjusting urban land use patterns,optimizing industrial structure,formulating land use policy,and so on.Methods employed include exploratory spatial data analysis(ESDA) and region statistical analysis method such as coefficient of variation and Theil index.Results showed that 1) intensive use of urban construction land in Jiangsu has increased since 1998,and the economic density of construction land between northern and southern region was different;2) intra-regional disparities between southern Jiangsu,central Jiangsu and northern Jiangsu have gradually attenuated;3) significant spatial autocorrelation existed in the distribution of economic density of construction land at county level,and high-value clustering phenomenon mainly located in southern region,while low-value clustering phenomenon located in northern areas.It is concluded that regionally statistical analysis and ESDA can reveal the status and spatial-temporal characteristic of the urban construction land efficiency.
Strategies for Imputing Missing Values and Removing Outliers in the Dataset for Machine Learning-Based Construction Cost Prediction

Haneul Lee,Seokheon Yun

DOI: https://doi.org/10.3390/buildings14040933

IF: 3.324

2024-03-29

Buildings

Abstract:Accurately predicting construction costs during the initial planning stages is crucial for the successful completion of construction projects. Recent advancements have introduced various machine learning-based methods to enhance cost estimation precision. However, the accumulation of authentic construction cost data is not straightforward, and existing datasets frequently exhibit a notable presence of missing values, posing challenges to precise cost predictions. This study aims to analyze diverse substitution methods for addressing missing values in construction cost data. Additionally, it seeks to evaluate the performance of machine learning models in cost prediction through the removal of conditional outliers. The primary goal is to identify and propose optimal strategies for handling missing value in construction cost records, ultimately improving the reliability of cost predictions. According to the analysis results, among single imputation methods, median imputation emerges as the most suitable, while among multiple imputation methods, lasso regression imputation produces the most superior outcomes. This research contributes to enhancing the trustworthiness of construction cost predictions by presenting a pragmatic approach to managing missing data in construction cost performance records, thereby facilitating more precise project planning and execution.

construction & building technology,engineering, civil
Value estimates of local public services using a spatial econometric model

龙奋杰,郑思齐,王轶军,郭明

DOI: https://doi.org/10.3321/j.issn:1000-0054.2009.12.029

2009-01-01

Abstract:A spatial econometric model was developed to estimate the value of local public services to formulate local public policy. The model includes spatial dependence and spatial lag factors to modify the bias of the traditional Hedonic method caused by spatial dependence. The estimates were correlated using reliable empirical data for micro-transaction in the housing market for Beijing and compared with results using the normal Hedonic model. The results show that a spatial correlation effect exists in the housing market and that the local public service price is not overestimated much by models not considering the spatial dependence. Thus, the model gives more reliable results than the traditional Hedonic method.
Accounting for spatial variation of land prices in hedonic imputation house price indexes

Yunlong Gong,Jan de Haan

DOI: https://doi.org/10.59490/abe.2017.4.3651

2018-01-01

Abstract:Location is capitalized into the price of the land the structure of a property is built on, and land prices can be expected to vary significantly across space. We account for spatial variation of land prices in hedonic house price models using geospatial data and a semi-parametric method known as mixed geographically weighted regression. To measure the impact on aggregate price change, quality-adjusted (hedonic imputation) house price indexes are constructed for a small city in the Netherlands and compared to price indexes based on more restrictive models, using postcode dummy variables or no location information at all. We find that, although taking spatial variation of land prices into account improves the model performance, the Fisher house price indexes based on the different hedonic models are almost identical. The land and structures price indexes, on the other hand, are sensitive to the treatment of location.

Relationship between bone mineral density and tooth loss in elderly Japanese women.

Predicting Enr'S Construction Cost Index Using The Modified K Nearest Neighbors (Knn) Algorithm

Predicting ENR Construction Cost Index Using Machine-Learning Algorithms

Spatial Variation of Construction Land Expansion in China: Based on EBI and EBIi

Covariate-distance Weighted Regression (CWR): A Case Study for Estimation of House Prices

Modeling urban growth using spatially heterogeneous cellular automata models: Comparison of spatial lag, spatial error and GWR

Geographically Weighted Regression Analysis for Spatial Economics Data: a Bayesian Recourse

Spatial Autoregressive Model for Population Estimation at the Census Block Level Using LIDAR-derived Building Volume Information

A Case Study in China Using Multiscale Geographically Weighted Regression

A modified spatial house price to income ratio and housing affordability drivers study: using the post-LASSO approach

Research on Forecasting the Cost of Residential Construction Based on PCA and LS-SVM

Impact of travel time uncertainties on modeling of spatial accessibility: a comparison of street data sources

Inferring the contiguity matrix for spatial autoregressive analysis with applications to house price prediction

Travel distance and land use: a generalized Box–Cox model with conditional spatial lag dependence

Assessment and Contributing Factors of the Spatial Misallocation of Construction Land: A Case Study of Shandong, China

PATH SELECTION OF SPATIAL ECONOMETRIC MODEL FOR MASS APPRAISAL OF REAL ESTATE: EVIDENCE FROM YINCHUAN, CHINA

Reducing spatial autocorrelation in the dynamic simulation of urban growth using eigenvector spatial filtering

Spatial-temporal Variation Analysis of the Economic Density of Urban Construction Land

Strategies for Imputing Missing Values and Removing Outliers in the Dataset for Machine Learning-Based Construction Cost Prediction

Value estimates of local public services using a spatial econometric model

Accounting for spatial variation of land prices in hedonic imputation house price indexes