Carbon bond that uses only one electron seen for first time: 'It will be in the textbooks'

Katherine Bourzac

DOI: https://doi.org/10.1038/d41586-024-03138-2

IF: 64.8

2024-09-27

Nature

Abstract:The fundamental discovery deepens scientists' understanding of chemical bonding. The fundamental discovery deepens scientists' understanding of chemical bonding.

multidisciplinary sciences

What problem does this paper attempt to address?

Deriving Carbon Atomic Chains from Graphene.

Chuanhong Jin,Haiping Lan,Lianmao Peng,Kazu Suenaga,Sumio Iijima

DOI: https://doi.org/10.1103/physrevlett.102.205501

IF: 8.6

2009-01-01

Physical Review Letters

Abstract:Stable and rigid carbon atomic chains were experimentally realized by removing carbon atoms row by row from graphene through the controlled energetic electron irradiation inside a transmission electron microscope. The observed structural dynamics of carbon atomic chains such as formation, migration, and breakage were well explained by density-functional theory calculations. The method we reported here is promising to investigate all-carbon-based devices with the carbon atomic chains as the conducting channel, which can be regarded as the ultimate basic component of molecular devices.
Subject Areas : Nanophysics , Graphene A Viewpoint on : Deriving Carbon Atomic Chains from Graphene

C. Jin,Lianmao Peng,K. Suenaga,S. Iijima

2014-01-01

Abstract:Carbon has an amazing number of different atomic configurations. Apart from the crystalline forms of diamond and graphite, we are now familiar with the cage structures of the fullerenes [1], the elongated carbon nanotubes [2], and the two-dimensional sheets of graphene [3], and each of these forms has led to a wealth of scientific discoveries and a range of applications. In a paper in Physical Review Letters, Chuanhong Jin, Kazu Suenaga and Sumio Iijima at NIAIST in Tsukuba, Japan, and Haiping Lan and Lianmao Peng at Peking University in China show that with a high-energy electron beam, they can transform graphite into graphene, and further into separate strings of carbon atoms [4]. There have been only scarce reports on carbon atom chains, and their new approach adds an avenue to produce new all-carbon electronic nanostructures.
Direct evidence for a carbon–carbon one-electron σ-bond

Takuya Shimajiri,Soki Kawaguchi,Takanori Suzuki,Yusuke Ishigaki

DOI: https://doi.org/10.1038/s41586-024-07965-1

IF: 64.8

2024-09-26

Nature

Abstract:Covalent bonds share electron pairs between two atoms and make up the skeletons of most organic compounds in single, double and triple bonds. In contrast, examples of one-electron bonds remain scarce, most probably due to their intrinsic weakness 1,2,3,4 . Although several pioneering studies have reported one-electron bonds between heteroatoms, direct evidence for one-electron bonds between carbon atoms remains elusive. Here we report the isolation of a compound with a one-electron σ-bond between carbon atoms by means of the one-electron oxidation of a hydrocarbon with an elongated C–C single bond 5,6 . The presence of the C•C one-electron σ-bond (2.921(3) Å at 100 K) was confirmed experimentally by single-crystal X-ray diffraction analysis and Raman spectroscopy, and theoretically by density functional theory calculations. The results of this paper unequivocally demonstrate the existence of a C•C one-electron σ-bond, which was postulated nearly a century ago 7 , and can thus be expected to pave the way for further development in different areas of chemistry by probing the boundary between bonded and non-bonded states.

multidisciplinary sciences
Exploring the boundaries of covalency

Zuping Xiong,Haoke Zhang

DOI: https://doi.org/10.1038/s41570-024-00672-5

IF: 34.5695

2024-11-07

Nature Reviews Chemistry

Abstract:One electron σ-bonds were first proposed in 1931 but most discussion since then has been at a theoretical level. The first experimentally observed single-electron C–C bond both advances our fundamental understanding of bonding and provides the basis of an approach to creating a new class of molecules.

chemistry, multidisciplinary
Chemical bond formation showing a transition from physisorption to chemisorption

Ferdinand Huber,Julian Berwanger,Svitlana Polesya,Sergiy Mankovsky,Hubert Ebert,Franz J Giessibl,Franz J. Giessibl

DOI: https://doi.org/10.1126/science.aay3444

IF: 56.9

2019-10-11

Science

Abstract:Imaging a chemisorption process At low temperatures, a molecule may adsorb to a surface only through weak forces (physisorption), and only upon heating and overcoming an energetic barrier does it form a strong covalent bond (chemisorption). Huber et al. imaged this transition for an atomic force microscopy tip terminating in a carbon monoxide molecule. Although the oxygen atom of the tip is normally considered to act like a rare gas atom, interacting only through van der Waals interactions, at short distances directly above a transition metal atom, it transitions to a strongly interacting chemisorption state. Science , this issue p. 235

multidisciplinary sciences
Quantum Entanglement in Carbon-Carbon, Carbon-Phosphorus and Silicon-Silicon Bonds

Matthieu Mottet,Pawel Tecmer,Katharina Boguslawski,Ors Legeza,Markus Reiher

DOI: https://doi.org/10.1039/C4CP00277F

2014-01-20

Abstract:The chemical bond is an important local concept to understand chemical compounds and processes. Unfortunately, like most local concepts, the chemical bond and the bond order do not correspond to any physical observable and thus cannot be determined as an expectation value of a quantum chemical operator. We recently demonstrated [Boguslawski et al., J. Chem. Theory Comput., 2013, 9, 2959--2973] that one- and two-orbital-based entanglement measures can be applied to interpret electronic wave functions in terms of orbital correlation. Orbital entanglement emerged to be a powerful tool to provide a qualitative understanding of bond-forming and bond-breaking processes, and allowed for an estimation of bond orders of simple diatomic molecules beyond the classical bonding models. In this article we demonstrate that the orbital entanglement analysis can be extended to polyatomic molecules to understand chemical bonding.

Strongly Correlated Electrons,Chemical Physics
Chemical Bonding and the Role of Node-Induced Electron Confinement

Alistair J. Sterling,Daniel S. Levine,Abdulrahman Aldossary,Martin Head-Gordon

DOI: https://doi.org/10.1021/jacs.3c10633

IF: 15

2024-03-28

Journal of the American Chemical Society

Abstract:The chemical bond is the cornerstone of chemistry, providing a conceptual framework to understand and predict the behavior of molecules in complex systems. However, the fundamental origin of chemical bonding remains controversial and has been responsible for fierce debate over the past century. Here, we present a unified theory of bonding, using a separation of electron delocalization effects from orbital relaxation to identify three mechanisms [node-induced confinement (typically associated...

chemistry, multidisciplinary
Carbon-Bonding Metal Catalysis (CBMC): A Supramolecular Complex Directs Structural-Isomer Selection in Gold-Catalyzed Reactions

Xinxin Li,Lingfei Hu,Gang Lu,Yao Wang

DOI: https://doi.org/10.1021/jacs.3c07551

IF: 15

2023-09-06

Journal of the American Chemical Society

Abstract:Carbon is a primary element to constitute organic molecules, while metal catalysis is a basic tool in organic synthesis. The establishment of a link between the ubiquitous carbon bonding and metal catalysis is thus a fundamentally important problem. However, there is yet no experimental example to introduce the role of carbon bonding in a metal catalysis process. Herein, we merged the topics of carbon bonding and metal catalysis together and demonstrated that a supramolecular carbon-bonding...

chemistry, multidisciplinary
Q-Carbon: A New Carbon Allotrope with a Low Degree of S-P Orbital Hybridization and Its Nucleation Lithiation Process in Lithium-Ion Batteries

Ruqian Lian,Jianrui Feng,Xin Chen,Dashuai Wang,Dongxiao Kan,Gang Chen,Yingjin Wei

DOI: https://doi.org/10.1021/acsami.9b17010

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:A novel metallic carbon allotrope, Q-carbon, was discovered using first-principles calculations. The named Q-carbon possessed a three-dimensional (3D) cage structure formed by carbon atoms with three ligands. The energy distribution of electrons in different orbitals revealed that Q-carbon has a low degree of s-p orbital hybridization. The calculated Li+ binding energies suggested Li+ aggregation inside Q-carbon during lithiation. As a result, a Li8C32 phase was formed and gradually expanded in Q-carbon, implying a typical two-phase transition. This allowed Q-carbon to have a constant theoretical voltage of 0.40 V, which effectively inhibited Li dendrite formation. A stable Li8C32/C-32 two-phase interface was confirmed by stress-strain analysis, and a calculated Li+ diffusion barrier of similar to 0.50 eV ensured effective Li+ diffusion along a 3D pathway. This study was of great significance for the understanding of two-phase transition of Li+ storage materials and provided a new insight into the design of new carbon materials for energy storage applications.
Chemists make 'impossible' molecules that break 100-year-old bonding rule

Gemma Conroy

DOI: https://doi.org/10.1038/d41586-024-03538-4

IF: 64.8

2024-11-01

Nature

Abstract:The molecules were deemed too unstable to make, but experiments show they can be 'captured' in certain reactions to yield useful products. The molecules were deemed too unstable to make, but experiments show they can be 'captured' in certain reactions to yield useful products.

multidisciplinary sciences
On the maximum bond multiplicity of carbon: unusual C equivalent to U quadruple bonding in molecular CUO

Hu,HS,Qiu,YH,Xiong,XG,Schwarz,WHE,Li,J

DOI: https://doi.org/10.1039/c2sc20329d

IF: 8.4

2012-01-01

Chemical Science

Abstract:Carbon is known to form single, double and triple bonds. An educated search led us to a novel view on the bonding of carbon in the triatomic uranium carbide oxide molecule CUO. When comparing various empirical properties and theoretical indices of a whole set of related species, some of those molecules are best described with carbon being quadruply bonded, with the ubiquitous one sigma- and two pi-bonds, plus a non-negligible, albeit weak, rearward sigma-bond. Observable indicators of bond strength suggest a rather high C-U bond order, significantly above three for a series of CUE molecules with different electrophilic ligands E. Several orbital-based indices count only a little more than three C-U bonds, although with additional ionic bonding. The bonding in the CU unit of CUE differs from the recently claimed quadruple bonding in C-2 owing to the rich U-pfds valence shell. CUE molecules are comparatively stable units with a high nucleophilicity at the carbon end, and they may become chemically interesting intermediates, for instance in water decomposition reactions.
Quadruple Bonding of Carbon in Terminal Carbides

YiHeng Qiu,HanShi Hu,Guo Chen,Jun Li

DOI: https://doi.org/10.1007/s11426-013-5000-z

2013-01-01

Science China Chemistry

Abstract:Despite its four valence electrons, carbon can at most form triple bond in ordinary organic complexes. Quadruple bonds for carbon had been considered as impossible for a long time. Recently we showed that quadruple bonding is viable in a triatomic uranium carbide oxide molecule CUO, where the terminal C is quadruply bonded with U via its nearly unhybridized 2s- and 2p-orbitals. Here we extend this new concept to a series of diatomic molecules consisting of tetravalent p-, d-, and f-elements and terminal carbide. Investigation has been focused on a series of CM-type molecules with possible quadruply-bonded carbon (QBC), CB−, CTi, CZr, CHf, CV+, CNb+, CTa+, and isoelectronic species of CUO. We have performed natural bond orbital (NBO), natural resonance theory (NRT), and atom-in-molecule (AIM) analyses at both density functional theory (DFT) and ab initio CASSCF levels to provide evidence for the feasibility of carbon quadruple bond in these systems. Our calculation results show that the C-M bond orders in these QBC species are comparable to that in CUO, indicating terminal carbides can have novel quadruple bonding when appropriate orbitals are available in the adjacent atoms.
Metallic bonds become molecular-like in atomic-sized devices

Harsh Deep Chopra,J. N. Armstrong,Susan Z. Hua

DOI: https://doi.org/10.48550/arXiv.1305.5582

2013-05-24

Abstract:Covalent molecules are characterized by directed bonds, which provide stability-of-form to the molecules relative atomic positions. In contrast, bulk metals are characterized by delocalized bonds, where a large number of resonance structures ensure their high stability. However, reduced to atomic dimensions, metallic arrangements become increasingly vulnerable to disruptive entropic fluctuations. Using the smallest possible device, namely, a single atom held between two atomically sharp probes, force to rupture single-atom bridges was measured with pico-level resolution, using gold and silver. Remarkably, measured forces are found to be a precise vector sum (directional bonding) of cohesive forces between the central and adjacently coordinated atoms. Over three to four times stronger than bulk, the directional bonds provide high configurational stability to atomic-sized metallic devices, just as delocalization-induced resonance stabilization is the emergent response of bulk metals. Results open new opportunity for molecular electronics without complications arising from metal/molecule interfaces.

Mesoscale and Nanoscale Physics,Materials Science
T-Carbon: A Novel Carbon Allotrope

Xian-Lei Sheng,Qing-Bo Yan,Fei Ye,Qing-Rong Zheng,Gang Su

DOI: https://doi.org/10.48550/arXiv.1105.0977

2011-05-05

Materials Science

Abstract:A structurally stable crystalline carbon allotrope is predicted by means of the first-principles calculations. This allotrope can be derived by substituting each atom in diamond with a carbon tetrahedron, and possesses the same space group Fd^1 3m as diamond, which is thus coined as T- carbon. The calculations on geometrical, vibrational and electronic properties reveal that T-carbon, with a considerable structural stability and a much lower density 1.50 g/cm3, is a semiconductor with a direct band gap about 3.0 eV, and has a Vickers hardness 61.1 GPa lower than diamond but comparable with cubic boron nitride. Such a form of carbon, once obtained, would have wide applications in photocatalysis, adsoption, hydrogen storage and aerospace materials.
Ocbbco: A Neutral Molecule with Some Boron-Boron Triple Bond Character

MF Zhou,N Tsumori,ZH Li,KN Fan,L Andrews,QA Xu

DOI: https://doi.org/10.1021/ja026257+

IF: 15

2002-01-01

Journal of the American Chemical Society

Abstract:Molecules that contain boron-boron multiple bonds are extremely rare due to the electron-deficient nature of boron. Here we report experimental and theoretical evidence of a neutral OCBBCO molecule with some boron-boron triple bond character. The molecule was produced and unambiguously characterized by matrix isolation infrared spectroscopy. Quantum chemical calculations indicate that the molecule has a linear singlet ground state with a very short boron-boron bond length.
Do we Know the Chemical Bond?

Sebastian Kozuch

DOI: https://doi.org/10.26434/chemrxiv-2024-jq0dj

2024-07-03

Abstract:The chemical bond is the biggest paradigm in chemistry. But at the same it is notoriously complex to define it. Under the assumption that knowing what we do not know makes better students and lecturers, we succinctly describe three approaches to define the bond (energetic, structural, and orbital), their advantages and especially their failures. We propose that these definitions, including their theoretical, practical and even philosophical issues, should be taught to advanced undergraduate chemistry students as an essential introduction to the chemical bond module of quantum chemistry courses. This is a controversial topic due to the lack of consensus in the chemical bond community over this heavily disputed topic and the conflicting pedagogical approach; however, and maybe because of this controversy, the teaching of the definitions of the chemical bond including their open questions and challenges can be positively instructive.

Chemistry
Quantum information-based analysis of electron-deficient bonds

Jan Brandejs,Libor Veis,Szilárd Szalay,Gergely Barcza,Jiří Pittner,Örs Legeza

DOI: https://doi.org/10.1063/1.5093497

2019-02-07

Abstract:Recently, the correlation theory of the chemical bond was developed, which applies concepts of quantum information theory for the characterization of chemical bonds, based on the multiorbital correlations within the molecule. Here for the first time, we extend the use of this mathematical toolbox for the description of electron-deficient bonds. We start by verifying the theory on the textbook example of a molecule with three-center two-electron bonds, namely the diborane(6). We then show that the correlation theory of the chemical bond is able to properly describe bonding situation in more exotic molecules which have been synthetized and characterized only recently, in particular the diborane molecule with four hydrogen atoms [diborane(4)] and neutral zerovalent s-block beryllium complex, whose surprising stability was attributed to a strong three-center two-electron $\pi$ bond stretching across the C-Be-C core. Our approach is of a high importance especially in the light of a constant chase after novel compounds with extraordinary properties where the bonding is expected to be unusual.

Chemical Physics,Strongly Correlated Electrons,Quantum Physics
A new mechanism of atomic manipulation: bond-selective molecular dissociation via thermally activated electron attachment.

Sumet Sakulsermsuk,Peter A. Sloan,Richard E. Palmer

DOI: https://doi.org/10.1021/nn101468e

IF: 17.1

2010-01-01

ACS Nano

Abstract:We report a new mechanism of (bond-selective) atomic manipulation in the scanning tunneling microscope (STM). We demonstrate a channel for one-electron-induced C-Cl bond dissociation in chlorobenzene molecules chemisorbed on the Si(111)-7 × 7 surface, at room temperature and above, which is thermally activated. We find an Arrhenius thermal energy barrier to one-electron dissociation of 0.8 ± 0.2 eV, which we correlate explicitly with the barrier between chemisorbed and physisorbed precursor states of the molecule. Thermal excitation promotes the target molecule from a state where one-electron dissociation is suppressed to a transient state where efficient one-electron dissociation, analogous to the gas-phase negative-ion resonance process, occurs. We expect the mechanism will be obtained in many surface systems, and not just in STM manipulation, but in photon and electron beam stimulated (selective) chemistry.
Novel carbon allotropes in all-sp2 bonding networks: Self-assembling design and first-principles calculations

Ying Ma,Pan Ying,Kun Luo,Yingju Wu,Baozhong Li,Qiaoyi Han,Julong He

DOI: https://doi.org/10.1039/d3cp00823a

IF: 3.3

2023-07-29

Physical Chemistry Chemical Physics

Abstract:Compared with traditional structure prediction methods, the purposeful bottom-up approach is better able to obtain structures with specified performance. In this study, we established two novel carbon phases in purely sp2-bonded networks, termed H61-carbon and H62-carbon, using a self-assembling approach. These carbyne-connected carbon allotropes had helix chains joined by cumulative double-bond chains. We certified the new carbon allotropes to be dynamically and mechanically stable. Both of these carbon allotropes exhibited excellent mechanical properties, and they had metallic and superconductive characteristics featuring superconducting transition temperatures of 10 K (H61-carbon) and 7.4 K (H62-carbon), respectively. These results provide an important strategy for the design of novel carbon allotropes with specified properties.

chemistry, physical,physics, atomic, molecular & chemical
Chemical Bonding in Many Electron Molecules

Alexander F. Sax

DOI: https://doi.org/10.48550/arXiv.2205.01078

2022-05-03

Abstract:Chemical bonding is the stabilization of a composite molecular system caused by different interactions in and between the subsystems, among the strong kinds of bonding is covalent bonding especially important. Characteristic for covalent bonding are small atom groups with short distances between the involved atoms, indicating that covalent bonding is essentially a local effect, according to Lewis, this is caused by shared electron pairs. However, the energetic stabilization is an approximately additive one-electron effect, as was shown by Ruedenberg and coworkers. In systems composed of many-electron subsystems, the fermionic character of the electrons determines the structure of the electron distribution in a subsystem, and it is decisive for the local interactions between the subsystems. Especially important is the Pauli exclusion principle (PEP), which directs the relative positions of identical electrons. Spin and charge rearrangements are of utmost importance for chemical bonding. Quantum chemical methods like CASSCF (complete active space SCF), also called FORS (fully optimized reaction space), are made to cover all such processes. The standard building blocks of CASSCF wave functions are delocalized molecular orbitals, which cannot display local effects. OVB (orthogonal valence bond) is a method to analyze CASSCF wave functions and to reveal local processes that are responsible for both the energetic aspects of bonding and the spatial structure of the stabilized system. This is shown by analyzing dissociation of ethene, disilene, and silaethene, and the corresponding reverse reactions. Aspects of diabaticity of the reactions and entanglement of subsystems are discussed.

Chemical Physics

Carbon bond that uses only one electron seen for first time: 'It will be in the textbooks'

Deriving Carbon Atomic Chains from Graphene.

Subject Areas : Nanophysics , Graphene A Viewpoint on : Deriving Carbon Atomic Chains from Graphene

Direct evidence for a carbon–carbon one-electron σ-bond

Exploring the boundaries of covalency

Chemical bond formation showing a transition from physisorption to chemisorption

Quantum Entanglement in Carbon-Carbon, Carbon-Phosphorus and Silicon-Silicon Bonds

Chemical Bonding and the Role of Node-Induced Electron Confinement

Carbon-Bonding Metal Catalysis (CBMC): A Supramolecular Complex Directs Structural-Isomer Selection in Gold-Catalyzed Reactions

Q-Carbon: A New Carbon Allotrope with a Low Degree of S-P Orbital Hybridization and Its Nucleation Lithiation Process in Lithium-Ion Batteries

Chemists make 'impossible' molecules that break 100-year-old bonding rule

On the maximum bond multiplicity of carbon: unusual C equivalent to U quadruple bonding in molecular CUO

Quadruple Bonding of Carbon in Terminal Carbides

Metallic bonds become molecular-like in atomic-sized devices

T-Carbon: A Novel Carbon Allotrope

Ocbbco: A Neutral Molecule with Some Boron-Boron Triple Bond Character

Do we Know the Chemical Bond?

Quantum information-based analysis of electron-deficient bonds

A new mechanism of atomic manipulation: bond-selective molecular dissociation via thermally activated electron attachment.

Novel carbon allotropes in all-sp2 bonding networks: Self-assembling design and first-principles calculations

Chemical Bonding in Many Electron Molecules