Abstract:Electrochemical energy storage devices, like supercapacitors and batteries, are needed to meet the constantly increasing demands of portable energy devices. Many types of supercapacitor electrodes were synthesized and reported which include carbon-based materials, polymers, oxides and perovskites. In this work, we report on the fabrication of Cu doped bismuth ferrite (Cu-BiFeO 3 , Cu-BFO) nanoparticles via sol-gel procedure. In most of the doping cases the costly rare earth elements like La, Nd, Sm, Ce and Yb are used to replace Bi. Electrodes of Bi 1-x Cu x FeO 3 where x have the values 0.0, 0.025, 0.05, 0.075, 0.1 and 0.15 were deposited on graphitic sheets. Optimum Cu doping value was found to be at x = 0.05. Cu 2+ ions doping in place of Bi 3+ ions will reveal the roles of oxygen vacancies, as determined from XPS. The estimated values of specific capacitance was found to be 732 F/g at 0.5 A/g for the electrode at x = 0.05 in three electrode system. 5%Cu-BFO//Carbon black asymmetric supercapacitor (ASC) device can be charged and discharged reversibly at cell voltage of 0.0 up to 1.5 V when using a 0.5 M Na 2 SO 4 aqueous electrolyte. This configuration allows the ASC device to deliver a great energy density of 37.25 Wh/kg at a power density of 752 W/kg. The ASC device demonstrates excellent cycling stability, retaining 88.64 % of its initial specific capacitance after 5000 cycles. Increasing the Cu content up to 15 % causes instability in the crystal structure of BFO resulting on phase segregation into Bi 2 Fe 4 O 9 along with BFO and deterioration in the electrode overall performance. XPS showed that replacement of Cu 2+ in place of Bi 3+ disturbs the neutrality and the chemical environment of the compound. Hence to achieve neutrality and ionic balance, oxygen vacancies increase and the Fe 2+ /Fe 3+ ratio increases as well. Both oxygen vacancies and the change in the Fe ions ratio reduce electrochemical impedance and give rise to charge density. The homogenous distribution of the pores at x = 0.05 contributed greatly to its fast electrolyte ion diffusion that improved the observed capacitive properties. One has to mention here, that despite doping that contains ions with different ionic size and/or different oxidation state is unfavorable, to some extent, due to the changes they produce in the electronic structure and the chemical environment, nevertheless it is sometimes beneficial in creating new parameters in the structure that promote specific application like in the case of the current work, oxygen vacancies, increase in surface area and the mixed state valency.

A simple but efficient Li-doping approach for enhancing supercapacitor performance of the BiFeO 3 perovskite nanostructures

A simple but efficient Li-doping approach for enhancing supercapacitor performance of the BiFeO3 perovskite nanostructures

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

Superior performance of asymmetric supercapacitor based on Cu doped bismuth ferrite electrode

Bi-Fe Chalcogenides Anchored Carbon Matrix and Structured Core–shell Bi-Fe-P@Ni-P Nanoarchitectures with Appealing Performances for Supercapacitors

Optimizing Fe2O3-based supercapacitor cathode with tunable surface pseudocapacitance via facile in situ vulcanization process

Kinetics-favorable heterojunctional CNTs@CuCo-LDH/BPQD electrode with boosted charge storage capability for supercapacitor

Enhancing lithium-ion and electric conductive Li2FeSiO4 cathode through in situ boron-doping and carbon-coating strategy

Promoting the Energy Storage Capability Via Selenium-Enriched Nickel Bismuth Selenide/graphite Composites As the Positive and Negative Electrodes

Poly (3, 4-ethylenedioxythiophene) engineered hollow Bi 2 O 3 core-shell architectures for long cycle performance of flexible supercapacitors

A novel nickel and cobalt-layered double Hydroxide@Nickel borate with three-dimensional flower-like structure as electrode material for high-performance hybrid supercapacitor

Optimizing the fabrication of Co compounds coating on modified carbon cloth with enhanced pseudocapacitive performance and cyclic stability

Honeycomb-like nitrogen-doped porous carbon decorated with Co3O4 nanoparticles for superior electrochemical performance pseudo-capacitive lithium storage and supercapacitors

Lithiation‐Induced Vacancy Engineering of Co 3 O 4 with Improved Faradic Reactivity for High‐Performance Supercapacitor

Effect of electronic structure modulation and layer spacing change of NiAl layered double hydroxide nanoflowers caused by cobalt doping on supercapacitor performance

B-Site Cation-Ordered Double-Perovskite Oxide As an Outstanding Electrode Material for Supercapacitive Energy Storage Based on the Anion Intercalation Mechanism.

Magnesium Bismuth Ferrite Nitrogen-Doped Carbon Nanomagnetic Perovskite: Synthesis and Characterization as a High-Performance Electrode in a Supercapacitor for Energy Storage

Fabricating tunable metal sulfides embedded with honeycomb-structured N-doped carbon matrices for high-performance lithium-ion capacitors

Fabrication of Mn doped BiFeO3 as an electrode material for supercapacitor applications

Prussian blue analogue-derived Co3O4/Fe2O3 with partially hollow and octahedral structure for high-performance supercapacitors

Enhanced Supercapacitor Performance of Bi2O3 by Mn Doping