Lithiation‐Induced Vacancy Engineering of Co 3 O 4 with Improved Faradic Reactivity for High‐Performance Supercapacitor

Yu Zhang,Yuxiang Hu,Zhiliang Wang,Tongen Lin,Xiaobo Zhu,Bin Luo,Han Hu,Wei Xing,Zifeng Yan,Lianzhou Wang

DOI: https://doi.org/10.1002/adfm.202004172

IF: 19

2020-07-30

Advanced Functional Materials

Abstract:<p>Transition metal oxides are promising electrode candidates for supercapacitor because of their low cost, high theoretical capacity, and good reversibility. However, intrinsically poor electrical conductivity and sluggish reaction kinetics of these oxides normally lead to low specific capacity and slow rate capability of the devices. Herein, a commonly used cobalt oxide is used as an example to demonstrate that lithiation process as a new strategy to enhance its electrochemical performance for supercapacitor application. Detailed characterization reveals that electrochemical lithiation of Co₃O₄ crystal reduces the coordination of the Co<span class="icomoon"></span>O band, leading to substantially increased oxygen vacancies (octahedral Co²⁺ sites). These vacancies further trigger the formation of a new electronic state in the bandgap, resulting in remarkably improved electrical conductivity and accelerated faradic reactions. The lithiated Co₃O₄ exhibits a noticeably enhanced specific capacity of 260 mAh g⁻¹ at 1 A g⁻¹, approximately fourfold enhancement compared to that of pristine Co₃O₄ (66 mAh g⁻¹). The hybrid supercapacitor assembled with lithiated Co₃O₄//N‐doped activated carbon achieves high energy densities in a broad range of power densities, e.g., 76.7 Wh kg⁻¹ at 0.29 kW kg⁻¹, 46.9 Wh kg⁻¹ at a high power density of 18.7 kW kg⁻¹, outperforming most of the reported hybrid supercapacitors.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem this paper attempts to address is the improvement of the electrochemical performance of transition metal oxides (such as cobalt oxide Co₃O₄) as electrode materials for supercapacitors. Specifically, researchers have found that although these materials have low cost, high theoretical capacity, and good reversibility, their inherent low conductivity and slow reaction kinetics result in low actual specific capacity and poor rate performance. Therefore, this paper proposes a new strategy—lithiation treatment, to improve the electrochemical performance by introducing oxygen vacancies in Co₃O₄.

### Main Issues:
1. **Low Conductivity**: The inherent conductivity of transition metal oxides (such as Co₃O₄) is poor, limiting their application in supercapacitors.
2. **Slow Reaction Kinetics**: The reaction kinetics of these materials are slow, resulting in poor specific capacity and rate performance.
3. **Insufficient Surface Chemical Reaction Activity**: The surface chemical reaction activity of these materials is insufficient, leading to actual capacity far below the theoretical value.

### Solution:
- **Lithiation Treatment**: By electrochemical lithiation treatment, oxygen vacancies are introduced in Co₃O₄, significantly improving its conductivity and accelerating Faradaic reactions.
- **Formation of New Electronic States**: After lithiation treatment, new electronic states are formed in Co₃O₄, narrowing the band gap, increasing carrier density, and improving conductivity.
- **Enhanced Surface Reaction Activity**: After lithiation treatment, the oxygen vacancies on the surface of Co₃O₄ increase the adsorption capacity for OH⁻, promoting Faradaic reactions, thereby improving electrochemical performance.

### Experimental Results:
- **Improved Specific Capacity**: The specific capacity of lithiated Co₃O₄ reached 260 mAh g⁻¹ at a current density of 1 A g⁻¹, which is about 4 times higher than that of untreated Co₃O₄ (66 mAh g⁻¹).
- **High Energy Density and Power Density**: The hybrid supercapacitor assembled with lithiated Co₃O₄ and nitrogen-doped activated carbon (NAC) achieved an energy density of 76.7 Wh kg⁻¹ at a power density of 0.29 kW kg⁻¹; at a high power density of 18.7 kW kg⁻¹, the energy density still reached 46.9 Wh kg⁻¹.
- **Good Cycling Stability**: The lithiated Co₃O₄ maintained a capacity retention rate of over 92% after 5000 cycles at a current density of 10 A g⁻¹.

### Conclusion:
Lithiation treatment, as an effective defect engineering strategy, can significantly improve the electrochemical performance of transition metal oxides (such as Co₃O₄), showing great potential for application in high-performance supercapacitors.