Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

Production of a Wood–Plastic Composite with Wastes from Disposable Masks and Corrugated Cardboard: A Sustainable Post-Pandemic Approach

Wood plastic composites: Using carbon fiber to create electromagnetic shielding effectiveness

Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites

Closed-loop Recyclable Wood-Plastic Composite As a Sustainable Alternative to Wood: A Solution for Utilizing Wood Waste and Promoting Carbon Sequestration

Sustainable Composites Containing Post-Production Wood Waste as a Key Element of the Circular Economy: Processing and Physicochemical Properties

Recycling End-of-life WPC Products into Ultra-High-filled, High-Performance Wood Fiber/polyethylene Composites: a Sustainable Strategy for Clean and Cyclic Processing in the WPC Industry

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Covid-19 waste facemask conundrum: A facile way of utilization through fabricating composite material with unsaturated polyester resin and evaluation of its mechanical properties

Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials

Valorization of Potential Post-Consumer Polyethylene (PE) Plastics Waste and Ethiopian Indigenous Highland Bamboo (EHB) for Wood Plastic Composite (WPC): Experimental Evaluation and Characterization

Wood Plastic Composite Based on Recycled High-Density Polyethylene and Wood Waste (Sawdust)

Mechanical upcycling of single-use face mask waste into high-performance composites: An ecofriendly approach with cost-benefit analysis

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Upgrading Mixed Plastic Wastes to Prepare Wood Plastic Composites Via Solid Mechanochemical Method

Production of sustainable wood-plastic composites from the nonmetals in waste printed circuit boards: Excellent physical performance achieved by solid-state shear milling

Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources

Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste

Jatobá wood flour: An alternative for the production of ecological and sustainable PCL biocomposites

Polymer composites from natural fibers and recycled waste surgical masks during COVID-19 pandemic

Upcycling of waste artificial turf for high‐performance wood‐plastic composites