Abstract:Although different damage-coupled physically based models have been proposed, those damage models are established based on the isothermal uniaxial or multi-axial tensile condition. However, the influence of the stress state on ductile failure strain is not adequately considered in the thermal damage models. It is widely recognized that the stress state has significant effect on damage evolution and ductility fracture for metallic materials. Actually, the current damage-coupled physically based models are not suitable for complex hot forming and the applications of these damage-coupled models are mainly focused on sheet hot stamping forming to date. Therefore, a modified damage-coupled unified model considering a broad range of stress states was established to figure out the complex damage behavior and microstructure evolution of metallic materials during the thermal deformation process. In this study, the Mg-6Gd-5Y-0.3Zr alloy was used as the experimental material. First, the flow behavior of the alloy was explored using a series of experiments under various stress states (i.e., uniaxial tensile, shear and compression) under various combinations of strain rates and temperatures. On this basis, a modified damage-coupled physics-based model was developed, in which the dynamic recrystallization, damage, stress triaxiality and Lode parameter were included as internal state variables. Furthermore, the model was integrated into ABAQUS to verify the applicability using hot spinnability test because the stress state was very complex during the forming process. The comparison between the calculated results and experiments is carried out. According to the simulation result, the predicted ultimate thinning rate is 71.14%, with an error of only 7.85% from the experimentally measured ultimate thinning rate of 77.2%, and the correlation coefficient and error for thickness and profile between the predicted values and experimental values are 0.9980 and 5.05%, respectively. These demonstrate that the developed model is reliable.

A hardness-based constitutive model for numerical simulation of blind rivet with gradient hardness distribution

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Numerical modelling of lockbolted lap connections for aluminium alloy plates

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Elastoplastic Mechanical Properties and Kinematic Hardening Model of 35CrNi3MoVR

A modified Johnson-Cook model considering strain softening of A356 alloy

Cellular Automaton Simulation of Microstructure Evolution for Friction Stir Blind Riveting

A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation

A Continuum Constitutive Model for a 7003-Aluminum Alloy Considering the Stress State and Strain Rate Effects

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

Neural Network Based Ryld2004 Anisotropic Hardening Model under Non-Associated Flow Rule for BCC and FCC Metals

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Subroutine Embedding and Finite Element Simulation of the Improved Constitutive Equation for Ti6Al4V during High-Speed Machining

Material-structure-process-performance integrated optimization method of steel/aluminum self-piercing riveted joint

Comparative Study of Various Hardening Models for the Prediction of Plastic Responses under Strain Path Change Conditions

Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy

Finite Element Modeling for Deep-Drawing of Aluminum Alloy Sheet 6014-T4 Using Anisotropic Yield and Non-Afr Models

A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation