Abstract:Nanocomposites based on polyolefin elastomer (POE), cyclic olefin copolymer (COC) and multi‐walled carbon nanotubes (MWCNTs) synthesized. By increasing the percentage of (MWCNT) in the POE/COC blend physical properties and electrical the conductivity increased. MWCNT has a greater tendency to be in the POE phase than COC. The subject of this research is a relatively detailed investigation of the rheological, morphological and electrical properties of nanocomposites based on polyolefin elastomer (POE), cyclic olefin copolymer (COC) and multi‐walled carbon nanotubes (MWCNTs). To formulate a mixture of two polymers (COC and POE), the melt mixing method was used and their morphology was studied by SEM technique and it was found that the morphology is of co‐continuous type. When the weight percentage ratio of COC was between 40 and 60, the desired morphology (co‐continuous) appeared. Interfacial tension calculations and TEM images proved that the nanotube particles were stabilized both within the phase of POE as well as at the interface of the two polymer phases. The rheological behavior was analyzed for composite samples containing 0–3 wt % MWCNT. The electrical and rheological percolation thresholds appeared at 1 and a 0.5 percent by weight of nanotube particles, respectively, which may be better to consider as related to the phenomenon of dual percolation. The highest conductivity was obtained for the nanocomposite containing 3% MWCNT. The results of mechanical tests also showed a strong upward trend of properties due to the addition of nanotube. Highlights The effect of COC content on the morphology of POE/COC blend was investigated. The Morphology for the POE/COC blend at low COC content was droplet‐matrix type. MWCNT has a greater tendency to be in the POE phase than COC. Rheological behavior strongly depended on the amount of nanotube particles. The highest conductivity was obtained for the sample containing 3% MWCNT.

Multi-walled carbon nanotubes-g-[poly(ethylene glycol)-b-poly(ε-caprolactone)]: synthesis, characterization, and properties

Preparation and characterization of biodegradable polycaprolactone/multiwalled carbon nanotubes nanocomposites

Preparation of Isotactic Polypropylene-Grafted Multiwalled Carbon Nanotubes (Ipp-G-mwnts) by Macroradical Addition in Solution and the Properties of Ipp-G-Mwnts/Ipp Composites

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Preparation of electrospun nanofibers of carbon nanotube/polycaprolactone nanocomposite

Properties of Electrospun Nanofibers of Multi-Block Copolymers of [Poly-Ε-caprolactone-b-poly(tetrahydrofuran-co-ε-caprolactone)]m Synthesized by Janus Polymerization.

Poly(ε-caprolactone)-Functionalized Carbon Nanotubes and Their Biodegradation Properties

[Pcl-B-p(thf-co-cl)]m Multiblock Copolymer Synthesized by Janus Polymerization

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Synthesis and Characterization of Nanostructured Copolymer-Grafted Multiwalled Carbon Nanotube Composite Thermoplastic Elastomers Toward Unique Morphology and Strongly Enhanced Mechanical Properties

Straight and Rod-like Core–Sheath Crystals of Solution-Crystallized Poly(ε-caprolactone)/Multiwalled Carbon Nanotube Nanocomposites

Synthesis and thermal behavior of poly(ε-caprolactone) grafted on multiwalled carbon nanotubes with high grafting degrees

Processing, Structure, and Properties of Multiwalled Carbon Nanotube/poly(hydroxybutyrate‐co‐valerate) Biopolymer Nanocomposites

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

Polycaprolactone-Based Composite Electrospun Nanofibers as Hybrid Biomaterial Systems Containing Hydroxyl- or Carboxylic Acid-Functionalized Multiwall Carbon Nanotubes

Synthesis and Characterization of Multi-Walled Carbon Nanotube/Polythiophene Composites

Preparation and Characterization of Novel Polyethylene/carbon Nanotubes Nanocomposites with Core–shell Structure

Preparation and Properties of Cyclic Olefin Copolymers Multiwalled Carbon Nanotube Nanocomposites

Polyolefin elastomer/cyclic olefin copolymer/multi‐walled carbon nanotubes nanocomposites: Rheological, morphological, electrical and mechanical study

Poly(lactide)-functionalized and Fe3O4 Nanoparticle-Decorated Multiwalled Carbon Nanotubes for Preparation of Electrically-Conductive and Magnetic Poly(lactide) Films and Electrospun Nanofibers

Polyelectrolyte-functionalized Multiwalled Carbon Nanotubes : Preparation, Characterization and Layer-by-layer Self-Assembly