Abstract:The distributed feedback laser (DFB) is a typical laser diode where the active region of the device is periodically structured as a diffraction grating. The output of a DFB laser has one single longitudinal mode and a relatively narrow line-width, usually several megahertz or one order less. However, applications such as coherent optical communication and accurate fiber sensing demand an even narrower line-width. An effective method for compressing a DFB laser is demonstrated. The line-width of a DFB laser, 200 KHz detected originally, is suppressed to sub kilohertz by adding an external parallel feedback cavity. The DFB laser is normatively designed but without the output isolator. The parallel feedback cavity is constructed by inserting several pieces of multimode fiber into a standard linear single-mode fiber cavity. In multimode fiber, each transverse mode has a different propagation constant. Equivalently, when a light beam propagates from single mode fiber to multimode fiber, it will split into a few parallel light paths with different propagation constants. The external cavity and DFB cavity form a compound resonant cavity for light beams. Lasing light in the compound cavity must fit the restrictions of all light paths, thus line-width of the final output is suppressed. When a passive external cavity is used, the line-width is suppressed to 1.25 KHz, detected by a delayed self-heterodyne interferometer with a 100km fiber delay line. By adding an erbium doped fiber amplifier (EDFA) into the external cavity for loss compensation, the result is updated to 430 Hz. This line-width suppressing method can be applied for other types of fiber lasers in a similar way. The parallel feedback mechanism is also suggested for general laser cavity designing to achieve ultra narrow line-width light source.

All-optical frequency stabilization and linewidth reduction of distributed feedback diode lasers by polarization rotated optical feedback

Frequency Stabilization of a DFB Laser to Molecular Cesium at 852nm by Polarization-Rotated Optical Feedback

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

Linewidth Compression of DFB Laser with a High Ratio Based on SIL and PDH

Long-Term Frequency Stabilization System For External Cavity Diode Laser Based On Mode Boundary Detection

Narrow Linewidth Distributed Feedback Lasers Utilizing Distributed Phase Shift

Multichannel Laser Frequency Stabilization in Optical Frequency Division Multiplexing System

External Cavity Diode Laser with Long-Term Frequency Stabilization Based on Mode Boundary Detection

Laser Frequency Stabilization Using a Dispersive Line Shape Induced by Doppler Effect.

Sub-megahertz Frequency Stabilization of a Diode Laser by Digital Laser Current Modulation

Modulation-free frequency stabilization system of external cavity diode laser based on Sagnac loop

Line-Width Compression Of The Distributed Feedback Laser With An External Parallel Feedback Cavity

A Balanced Dual-Intracavity Dual-Mode Interlocking Method for Fiber Laser Self-Reference Wavelength Stabilization

Laser Frequency Stabilization by Combining Modulation Transfer and Frequency Modulation Spectroscopy

Simplified 1.5 μm Distributed Feedback Semiconductor Laser (DFB-LD) Frequency Stabilization System Based on Gas Absorption Chamber

The Frequency Stabilization Method of Laser Feedback Interferometer Based on External Cavity Modulation

Optical frequency locked loop for long-term stabilization of broad-line DFB laser frequency difference

Narrowing Laser Linewidth Using Modulation Transfer Spectroscopy

Frequency Stabilization of a 214.5-Nm Ultraviolet Laser

Stabilized DFB Laser System with Large Tuning Range

Widely Tunable Distributed Feedback Semiconductor Lasers with Constant Power and Narrow Linewidth