Abstract:The polycrystalline IN713C produced via investment casting is one of the widely-used nickel-based superalloy in automotive and aerospace industries. This alloy, however, has an apparent inhomogeneous microstructure generated during casting and contains dendritic structure that gives rise to strain localisation during loading. Yet, the effect of dendrite structure, grain size and shape as well as crystallographic orientation, which directly influence fatigue property and deformation micromechanism in the components, is rarely studied. In the present study, IN713C cast bars are tailored with three different grain structures, i.e., transition, equiaxed and columnar, with substantial grain size variations. The produced bars were tested under strain controlled LCF (Low Cycle Fatigue) and stress controlled HCF (High Cycle Fatigue) conditions at 650 °C. The results showed that most of fatigue cracks initiated from casting porosities and fatigue life extended in the microstructure with a small grain size during both HCF and LCF loadings. It is also demonstrated that fatigue striations were mainly observed within dendrite areas during crack propagation, whereas the higher GND (Geometrically Necessary Dislocation) density were predominantly observed in the interdendrite areas. Here, we propose a concept of 'Crack Propagation Unit (CPU)' for better description of deformation mechanism at local scale during fatigue loading by combining fracture surface characteristic methodology and dislocation distribution analyses within the dendrite structural unit. Furthermore, this model to understand the deformation micromechanism can provide a new perspective on the interpretation of Hall-Petch relationship in casting materials that contain dendritic structure. This is further demonstrated via direct correlation of the high crack propagation resistance with the crack path divergence instead of the dislocation pile-up at the grain boundary or in-between the γ/ γ' channels. Moreover, by utilising serial sectioning method followed by layered EBSD scanning, quasi-3-D grain orientation mappings were obtained, and crystallographic texture information were directly correlated with the fracture surface observations. This allowed an investigation of the influence of orientation of individual grains and micro/macro texture on crack propagation rate. The critical stage of crack propagation in fatigue life and its correlations with microstructural features is established, offering potential practical applications by controlling the investment casting process parameters.

Investigation on fatigue crack propagation behaviors in the thickness direction of 2519A aluminum alloy thick plate

Influence of Solid Solution Treatment on Fatigue Crack Propagation Behavior in the Thickness Direction of 2519A Aluminum Alloy Thick Plates

Physical essence of long fatigue crack growth behavior for aluminum-lithium alloy

Vibration Fatigue Assessment and Crack Propagation Mechanism of Directionally Solidified Superalloy with Film Cooling Holes

Investigation of fatigue crack propagation behavior of 5083 aluminum alloy under various stress ratios: Role of grain boundary and Schmid factor

Study on Fatigue Crack Propagation and Extrinsic Toughening of an Al–Li Alloy

Investigation of High-Cycle Fatigue and Fatigue Crack Propagation Characteristic in 5083-O Aluminum Alloy

Anisotropy in fatigue crack propagation behavior of Al-Cu-Li alloy thick plate

On high‐cycle fatigue anisotropy of an aluminum alloy super‐thick plate

Influence of pre-deformation on microstructure and mechanical properties along thickness direction of 2519A Al alloy thick plate

Fracture Toughness and Fatigue Crack Growth Analysis of 7050-T7451 Alloy Thick Plate with Different Thicknesses

In situ sem observation of self-arresting of fatigue cracks in Al-Li alloy 1420 thick plate

Fatigue crack propagation anisotropy of an Al–Zn–Mg–Cu super-thick plate

Mechanisms for Goss-grains Induced Crack Deflection and Enhanced Fatigue Crack Propagation Resistance in Fatigue Stage II of an AA2524 Alloy

Investigations on the Fatigue Property of the High-Strength and Toughness 211z Casting Aluminium Alloy

High Cycle Fatigue and Fracture Behavior of 2124-T851 Aluminum Alloy

The Effects of Grain Size, Dendritic Structure and Crystallographic Orientation on Fatigue Crack Propagation in IN713C Nickel-Based Superalloy

Effects of Inclusions, Grain Boundaries and Grain Orientations on the Fatigue Crack Initiation and Propagation Behavior of 2524-T3 Al Alloy

Research on the Corrosion Fatigue Property of 2524-T3 Aluminum Alloy

Investigation of Fatigue Growth Behavior of an Inclined Crack in Aluminum Alloy Plate

The Behavior of Fatigue Crack Initiation and Propagation in AA2524-T34 Alloy