Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The topology optimization is considered to enhance the strength, stiffness, and specific energy absorption of a quasi-honeycomb sandwich structure since it can achieve the optimal distribution of materials. However, the existing material interpolation models do not make the topology structure have good clarity and stability. In the present study, a novel variable-density topology optimization based on an improved interpolation model is developed for the design of a quasi-honeycomb core. The combined cells are circularly spreading outward from the geometric center of the design domain, and the wall thickness function of the equivalent cell (i.e. a simplified model of the combined cell) is established on the basis of relative density. The SR material interpolation model is modified by adding the minimum elastic modulus term, fitting the weighting and penalty factors, and adopting the volume constraint of Bi-directional Evolutionary Structural Optimization (BESO). The optimization is conducted to minimize the compliance of the quasi-honeycomb core, in which the relative densities of equivalent cells are chosen as the design variables due to the mapping between topology elements and equivalent cells. The three-dimensional (3D) geometric models of original and optimized quasi-honeycomb cores, upper face sheets, and lower face sheets are built using SolidWorks and printed on a 3D printer. The deflection, strain, bending stiffness, and energy absorption under different material retention rates, restraint positions, and face sheet thicknesses are investigated by three-point bending tests. It is found that the improved SR material interpolation model is efficient for suppressing the grid dependence and checkerboard, and the mechanical properties of optimized quasi-honeycomb sandwich structures are significantly enhanced in comparison with original structures, confirming that the developed method provides important guidance for designing and optimizing the quasi-honeycomb sandwich structure.

Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors

Mechanical characterization of Al2O3 twisted honeycomb structures fabricated by digital light processing 3D printing

Laser powder bed fusion of bio-inspired reticulated shell structure: Optimization mechanisms of structure, process, and compressive property

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

Local Strengthening Design and Compressive Behavior Study of the Triangular Honeycomb Structure

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

Microstructure and Geometry Effects on the Compressive Behavior of LPBF- Manufactured Inconel 718 Honeycomb Structures

Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure

Variable-density topology optimization and bending test of quasi-honeycomb sandwich structures

Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts

Optimization of printing parameters and out-of-plane compression performance of 316L stainless steel ribbed honeycomb

Mechanical property enhancement in additively manufactured NiTi double-asymmetric honeycombs with bioinspired graded design

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Effects of different joint wall lengths on in-plane compression properties of 3D braided jute/epoxy composite honeycombs

Study on the Deformation Mode and Energy Absorption Characteristics of Protective Honeycomb Sandwich Structures Based on the Combined Design of Lotus Root Nodes and Leaf Stem Veins

Study on the bending and dimensional behavior of honeycomb latticed ONYX composite material

Crushing Response and Optimization of a Modified 3D Re-Entrant Honeycomb

Mechanical Behavior of Bio-Inspired Honeycomb–Core Composite Sandwich Structures to Low-Velocity Dynamic Loading

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Experimental and Numerical Investigation of Polymer-Based 3D-Printed Lattice Structures with Largely Tunable Mechanical Properties Based on Triply Periodic Minimal Surface