Abstract:The production of advanced biofuels represents a near-term opportunity to decarbonize the heavy vehicle transportation sector. However, important barriers must be overcome and successful deployment of these technologies will require (i) catalyst and process development to reduce cost and improve carbon utilization and (ii) industry-relevant validation of operability to de-risk scale-up. Herein, we seek to address these challenges for an integrated two-step process involving catalytic fast pyrolysis (CFP) followed by co-hydrotreating of bio-oil with refinery streams. Technoeconomic and lifecycle analysis based on the data presented herein reveal the potential to generate low-carbon transportation fuels and chemical co-products with a modelled selling price of ) and a 78% reduction in greenhouse gas emissions compared to fossil-based pathways. The feedstock for this research was a blend of 50 wt% loblolly pine and 50 wt% waste forest residues, and the CFP step was performed using an ex situ fixed bed of Pt/TiO 2 with co-fed H 2 at atmospheric pressure. Compared to previous state-of-technology benchmarks, advancements in catalyst design and synthesis methodology enabled a 4x reduction in Pt loading and a 4x increase in time on stream without negatively impacting upgrading performance. Additionally, a first-of-its-kind integrated assessment of waste gas adsorption showed near quantitative recovery of acetone and 2-butanone, which collectively represent approximately 5% of the biomass carbon. The valorization of these co-products opens opportunities to support decarbonization of the chemical sector while simultaneously improving the overall process carbon efficiency to > 40%. After condensation, the CFP-oil was co-hydrotreated with straight run diesel (10:90 vol%) to achieve 95% biogenic carbon incorporation. The oxygen content of the hydrotreated oil was below detection limits, and the diesel fraction exhibited a cetane number and cloud point suitable for a finished fuel. This manuscript concludes by highlighting remaining research needs associated with improving thermal management during catalyst regeneration, mitigating catalyst deactivation due to inorganic deposition, and demonstrating durability of biomass feeding systems when operated in hydrogen-rich environments.

Gasoline from biomass through refinery-friendly carbohydrate-based bio-oil produced by ketalization

Catalytic interventions in bio-oil production from lignocellulosic biomass and Co-processing with petroleum refinery fractions: A review

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

Lignocellulose biomass pyrolysis for bio-oil production: A review of biomass pre-treatment methods for production of drop-in fuels

Bio-oil production and catalytic upgrade to value added product: A review on recent technologies

From biomass to fuels: a carbon-efficient route combining ketalization and fluid catalytic cracking

Biomass fast pyrolysis for liquid fuels

Chemical evaluation of pyrolysis oils from domestic and industrial effluent treatment station sludges with perspective to produce value-added products

Bio-oil upgrading by reactive distillation using p-toluene sulfonic acid catalyst loaded on biomass activated carbon

Evaluation of Bio-Oils in Terms of Fuel Properties

Renewable gasoline produced by co-cracking of methanol and ketones in bio-oil

Novel pathways for fuels and lubricants from biomass optimized using life-cycle greenhouse gas assessment

Review on Biomass Pyrolysis with a Focus on Bio-Oil Upgrading Techniques

Methane-assisted selective bio-oil deoxygenation for high-quality renewable fuel production: A rational catalyst design and mechanistic study

Production of renewable fuels by blending bio-oil with alcohols and upgrading under supercritical conditions

Hydrocarbons Extracted from Advanced Pyrolysis Bio-Oils: Characterization and Refining

Preparation of jet engine range fuel from biomass pyrolysis oil through hydrogenation and its comparison with aviation kerosene

Upgrading biomass-derived pyrolysis bio-oil to bio-jet fuel through catalytic cracking and hydrodeoxygenation: A review of recent progress

Recent advances on strategies for upgrading biomass pyrolysis vapour to value-added bio-oils for bioenergy and chemicals

Conceptual process design and economics for the production of high‐octane gasoline blendstock via indirect liquefaction of biomass through methanol/dimethyl ether intermediates