Comparison of the induction of hepatic peroxisome proliferation by the herbicide oxadiazon in vivo in rats, mice, and dogs and in vitro in rat and human hepatocytes.

L. Richert,S. Price,C. Chesné,K. Maita,N. Carmichael

DOI: https://doi.org/10.1016/S0041-008X(96)80006-8

IF: 4.46

1996-11-01

Toxicology and Applied Pharmacology

Abstract:

What problem does this paper attempt to address?

Interaction of Janus kinases JAK-1 and JAK-2 with the insulin receptor and the insulin-like growth factor-1 receptor.

Philippe Gual,V. Baron,Valerie Lequoy,E. V. Obberghen

DOI: https://doi.org/10.1210/en.139.3.884

IF: 5.051

Endocrinology

Abstract:Insulin and insulin-like growth factor-1 (IGF-1) treatment of cells overexpressing the insulin receptor or the IGF-1 receptor promotes phosphorylation and activation of Janus kinases JAK-1 and JAK-2 but not of TYK-2. With insulin, we observed maximal phosphorylation of JAK-1 within 2 min (5.2 +/- 0.6-fold) and maximal phosphorylation of JAK-2 within 10 min (2.4 +/- 0.6-fold). In cells incubated with IGF-1, we found maximal phosphorylation of JAK-2 within 2 min (1.9 +/- 0.2-fold) and of JAK-1 within 5 min (4.5 +/- 0.4-fold). The JAKs from insulin- or IGF-1-stimulated cells were activated, as shown by their autophosphorylation in vitro. Moreover, they were able to phosphorylate in vitro native insulin receptor substrate (IRS)-1 and a fragment of IRS-2 (GST-IRS-2591-786). Comparison of 32P-peptide maps of IRS-1 phosphorylated in vitro by the insulin receptor vs. JAK-1 showed the occurrence of different phosphopeptides, suggesting that different sites are likely to be phosphorylated by the two kinases. Finally, coprecipitation of receptors and JAK-1 was seen, and phosphorylation of both receptors was found to be necessary for receptor binding to JAK-1. Two domains of JAK- 1 are involved in the formation of the complex between receptor and JAK-1, i.e. the N-terminal portion containing JH7 and JH6 domains, and the C-terminal kinase domain (JH1 domain). Taking our data together, we conclude that: 1) insulin and IGF-1 lead to phosphorylation and activation of JAK-1 and JAK-2 in intact cells; 2) phosphorylation of IRS-I by JAK-1 seems to occur on sites different from those phosphorylated by the insulin receptor; 3) JAK-1 interacts directly with phosphorylated insulin and IGF-1 receptors; and 4) the JH7-JH6 and JH1 domains of JAK-1 are responsible for the interaction with insulin and IGF-1 receptors.
Preparation and Modification of Well-Aligned CNTs Grown on AAO Template

JM Xu,XB Zhang,C Fei,T Li,Y Li,XY Tao,YW Wang,XJ Wu

DOI: https://doi.org/10.1016/j.apsusc.2004.05.281

IF: 6.7

2004-01-01

Applied Surface Science

Abstract:Anodic aluminum oxide (AAO) template was prepared by a two-step anodization method and cobalt particles were carefully deposited at the bottom of pores of the template. CVD method was used to grow carbon nanotubes (CNTs) on the template with this cobalt as catalyst and C2H2 as carbon source. Well-aligned carbon nanotubes were obtained perpendicular to the substrate. To modify the CNTs, ultrasonic treatment of the samples in alcoholic (or water) was applied and the results showed that the length of CNTs became equalized and their tips were opened without catalyst particles due to ultrasonically cutting off CNTs for the upper parts out of AAO pores. The mechanism is also discussed.
Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

Hiromasa Teshima,Kohei Kojima,Yang Ju

DOI: https://doi.org/10.1115/1.4028316

2014-01-01

Journal of Electronic Packaging

Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.
The growth of carbon nanostructures in the channels of aligned carbon nanotubes

Xiaowei Zhao,Peng Jiang,Weiguo Chu,Shicheng Mu,Dongfang Liu,Li Song,Lifeng Liu,Shudong Luo,Zengxing Zhang,Yanjuan Xiang,Weiya Zhou,Gang Wang,Sishen Xie

DOI: https://doi.org/10.1016/j.carbon.2005.12.038

IF: 10.9

2006-01-01

Carbon

Abstract:The preparation of anodic aluminum oxide (AAO) by a two-step anodizing process, was investigated. The AAO template method has been proved to be effective and simple as AAO itself can catalytically decompose hydrocarbon gases and deposit CNTs on the inner walls of its pores. For transmission electron microscope (TEM) characterization, the sample was etched with 6M NaOH solution to dissolve the AAO template and then rinsed by distilled water. The results show that the outer tube wall can also act as another carbon source and has influences to the inner carbon nanostructures.
Controlled growth of carbon nanotubes in diameter and shape using template-synthesis method

Zhi-hao Yuan,Hua Huang,Liang Liu,Shou-shan Fan

DOI: https://doi.org/10.1016/S0009-2614(01)00854-5

IF: 2.719

2001-01-01

Chemical Physics Letters

Abstract:A template-synthesis technique based on self-ordered hexagonal nanopore alumina templates was applied for synthesizing highly ordered carbon nanotube arrays via thermal decomposition of ethylene with iron as catalyst electrodeposited into the bottom of the pores. It was found that the resultant carbon nanotubes in diameter and shape exactly reflect the pore of the template used. This shows that the diameter of nanotubes can be easily controlled and adjusted through the pore sizes of the templates, and the nanotubes with various shapes can be grown by applying templates with the same pore shapes as those of the tubes. This controllable synthesis method will be of great fundamental and practical interests.
Controlled Synthesis of Anatase Tio2 Nanotube and Nanowire Arrays Via Aao Template-Based Hydrolysis

Lixin Yuan,Siqin Meng,Yuanyuan Zhou,Zhenxing Yue

DOI: https://doi.org/10.1039/c2ta00709f

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:A novel and facile method was successfully developed to fabricate nanotube (NT) and nanowire (NW) arrays through an anodic aluminum oxide (AAO) template-based Ti(OC4H9)(4) hydrolysis process. The wall thickness of the TiO2 NTs can be controlled by adjusting the concentration of Ti(OC4H9)(4) solutions. A continuous series from thin-walled NTs to completely filled NWs were synthesized using Ti(OC4H9)(4) solutions of different concentrations from 0.1 to 2.0 M. The TiO2 NTs and NWs in the AAO membrane transformed from amorphous to nanocrystalline anatase completely after annealing at 650 degrees C, which is higher than the phase transformation temperature of TiO2 powder. Optical spectra of the synthesized TiO2 NT and NW arrays/AAO composite nanostructures were characterized and showed a blue shift of the optical absorption edge with the decrease of NT wall thickness, due to the nanoscale effect and shape dependent transformation.
Fabrication and characterization of highly ordered nanotubes of anodic aluminum oxide

DOI: https://doi.org/10.51348/khgj3933

2021-04-25

CHEMISTRY AND CHEMICAL ENGINEERING

Abstract:Investigated the electrochemical synthesis and characterized of a nanometer scale porous anodic aluminum oxide (AAO) membrane with a mean pore diameter about of 80-100 nm. The anodizing process done by varying the anodizing temperature from 20 °C to 25 °C. The membranes exhibit interesting properties such as controllable pore diameters, periodicity and density distribution. These properties can preselect by adjusting the controlling parameters of a temperature-controlled two-step anodization process. The surface features of the nanometer scale membrane such as pore density, pore diameter and interpore distance were quantified using scanning electron microscopy (SEM) and atomic force microscopy (AFM). SEM and AFM investigations revealed the presence of focal adhesion sites over the surface of the porous membranes. The positive outcomes of the study, indicates that AAO membranes can used for applications in the future.
Controlling the anodizing conditions in preparation of an nanoporous anodic aluminium oxide template

Azadeh Nazemi,Seyed Abolfazl,Seyed Sadjadi

DOI: https://doi.org/10.2478/s13536-014-0220-2

2014-12-01

Abstract:Abstract Porous anodic aluminium oxide (AAO) template is commonly used in the synthesis of one-dimensional nanostructures, such as nanowires and nanorods, due to its simple fabrication process. Controlling the anodizing conditions is important because of their direct influence on the size of AAO template pores; it affects the size of nanostructures that are fabricated in AAO template. In present study, several alumina templates were fabricated by a two-step electrochemical anodization in different conditions, such as the time of first process, its voltage, and electrolyte concentration. The effect of these factors on pore diameters of AAO templates was investigated using scanning electron microscopy (SEM).

materials science, multidisciplinary
Rapid Growth of Aligned Cnts on Aao Template and Its Sonication Cutting

JM Xu,XB Zhang,F Chen,Y Li,YW Wang

DOI: https://doi.org/10.3866/pku.whxb20040311

2004-01-01

Abstract:Carbon nanotubes were synthesized on anodic aluminum oxide (AAO) template by chemical vapor deposition catalyzed by electrodeposited cobalt particles in its pores. The growth of the carbon nanotubes on the basis of top-growth model is fast. Sonication cutting process was applied to shorten the outgrown carbon nanotubes to get aligned carbon nanotube film. With the increase of sonicating time, the ordered orientation of carbon nanotubes on the AAO template is improved. Meanwhile, cobalt catalyst on the top of the carbon nanotube is cut off during the sonication. So the end-opened aligned carbon nanotube film is obtained at last. The mechanism of this treatment is also discussed.
Growth of Well-Aligned Carbon Nanotube Arrays on Silicon Substrates Using Porous Alumina Film As a Nanotemplate

WC Hu,DW Gong,Z Chen,LM Yuan,K Saito,CA Grimes,P Kichambare

DOI: https://doi.org/10.1063/1.1415406

IF: 4

2001-01-01

Applied Physics Letters

Abstract:Aligned, open-tipped carbon nanotube arrays of high density and uniformity were synthesized via a flame method on silicon substrates using a nanoporous template of anodized aluminum oxide from which the nanotubes were grown. The diameter and length of the nanotubes are controlled by the geometry of the aluminum oxide template. These results show the feasibility of integration between carbon nanotube arrays and silicon microelectronics.
Template-confined growth and structural characterization of amorphous carbon nanotubes

Y. Yang,Z. Hu,Q. Wu,Y.N. Lü,X.Z. Wang,Y. Chen

DOI: https://doi.org/10.1016/S0009-2614(03)00651-1

IF: 2.719

2003-01-01

Chemical Physics Letters

Abstract:Porous anodic aluminum oxide templates with different channel structures have been synthesized and used to grow carbon nanotubes (CNTs) through the pyrolysis of ethylene at 700 °C. Aligned CNT arrays, Y-branched as well as novel dendriform CNTs have been obtained and well characterized by scanning electron microscopy and high-resolution transmission electron microscopy. The amorphous structure, irregular and quasi-hemispherical ends as well as the branched junction have been revealed in detail. The disordered structure of the carbon nanotubes was assigned to the lattice mismatch between alumina and carbon species. A growth mechanism mainly based on the space-limited and self-catalytic functions of template channels has been proposed accordingly.
Controlling Growth of Aligned Carbon Nanotubes from Porous Silicon Templates

Xu Dongsheng,Guo Guolin,Gui Linlin,Tang Youqi,Shi Zujin,Jin Zhaoxia,Gu Zhennan

DOI: https://doi.org/10.1007/bf02969491

2000-01-01

Science in China Series B Chemistry

Abstract:Fabricating well-aligned carbon nanotubes, especially, on a silicon substrate is very important for their applications. In this paper, an aligned carbon nanotube array has been prepared by pyrolysis of hydrocarbons catalyzed by nickel nanoparticles embedded in porous silicon (PS) templates. High-magnification transmission electron microscopy images confirm that the nanotubes are well graphitized. The PS substrates with pore sizes between 10 and 100 nm play a control role on the growth of carbon nanotubes and the diameters of the tubes increase with the enlargement of the pores of the substrates. However, such a control role cannot be found in the macro-PS substrates.
Preparation of Anodic Aluminum Oxide (AAO) Nano-Template on Silicon and Its Application to One-Dimensional Copper Nano-Pillar Array Formation

Lan Shen,Mubarak Ali,Zhengbin Gu,Bonggi Min,Dongwook Kim,Chinho Park

DOI: https://doi.org/10.1007/s11814-012-0124-y

IF: 2.7

2013-01-01

Korean Journal of Chemical Engineering

Abstract:Anodized aluminum oxide (AAO) nanotemplates were prepared using the Al/Si substrates with an aluminum layer thickness of about 300 nm. A two-step anodization process was used to prepare an ordered porous alumina nanotemplate, and the pores of various sizes and depths were constructed electrochemically through anodic oxidation. The optimum morphological structure for large area application was constructed by adjusting the applied potential, temperature, time, and electrolyte concentration. SEM investigations showed that hexagonal-close-packed alumina nano-pore arrays were nicely constructed on Si substrate, having smooth wall morphologies and well-defined diameters. It is also reported that one dimensional copper nanopillars can be fabricated using the tunable nanopore sized AAO/Si template, by controlling the copper deposition process.
In-situ template synthesis of TiO2 nanotube array films

Wufeng Jiang,Yunhan Ling,Suju Hao,Hongyi Li,Xinde Bai,Daqiang Cang

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.2200

2007-01-01

Key Engineering Materials

Abstract:Anodic aluminum oxide (AAO) is commonly used as a starting template for fabrication of several kinds of functional nanoscale devices due to its homogeneous nanohole structure with high aspect ratio. In this paper, high density and uniform titanium dioxide nanotube array films were prepared via liquid phase deposition method by immersing the AAO templates in an aqueous ammonium hexafluoro-titanate solution. The phase and microstructure of the nanotube array films were characterized by X-ray diffraction and field-emission scanning electron microscopy. It was found that the mean inner diameters of nanotube are 40-100 run, mainly depended on different templates and post treatment condition; the phase of as-deposited TiO2 array film was amorphous, while it became anatase at above 400 degrees C.
Synthesis of silicon nanotubes with cobalt silicide ends using anodized aluminum oxide template

Zhang Zhang,Lifeng Liu,Tomohiro Shimizu,Stephan Senz,Ulrich Gösele

DOI: https://doi.org/10.1088/0957-4484/21/5/055603

IF: 3.5

2009-12-21

Nanotechnology

Abstract:Silicon nanotubes (SiNTs) are compatible with Si-based semiconductor technology. In particular, the small diameters and controllable structure of such nanotubes are remaining challenges. Here we describe a method to fabricate SiNTs intrinsically connected with cobalt silicide ends based on highly ordered anodic aluminum oxide (AAO) templates. Size and growth direction of the SiNTs can be well controlled via the templates. The growth of SiNTs is catalyzed by the Co nanoparticles reduced on the pore walls of the AAO after annealing, with a controllable thickness at a given growth temperature and time. Simultaneously, cobalt silicide forms on the bottom side of the SiNTs.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Freestanding Macroscopic Metal-Oxide Nanotube Films Derived from Carbon Nanotube Film Templates

He Ma,Yang Wei,Jiangtao Wang,Xiaoyang Lin,Wenyun Wu,Yang Wu,Ling Zhang,Peng Liu,Jiaping Wang,Qunqing Li,Shoushan Fan,Kaili Jiang

DOI: https://doi.org/10.1007/s12274-015-0714-1

2015-01-01

Abstract:Aligned carbon nanotube films coated with amorphous carbon were developed into novel templates by atomic layer deposition. Freestanding macroscopic metal-oxide nanotube films were then successfully synthesized by using these templates. The reactive amorphous carbon layer greatly improved the nuclei density, which ensured the high quality of the films and allowed for precise control of the wall thickness of the nanotubes. Using template-synthesized alumina nanotube films, we demonstrate a humidity sensor with a high response speed, a transmission electron microscopy (TEM) grid, and a catalyst support. The cross-stacked assembly, ultrathin thickness, chemical inertness, and high thermal stability of the alumina nanotube films contributed to the excellent performance of these devices. In addition, it is expected that the metal-oxide nanotube films would have significant potential owing to their material richness, macroscopic appearance, flexibility, compatibility with the semiconducting technologies, and the feasibility of mass production.
Fabrication and characterization of vertically aligned carbon nanotubes on silicon substrates using porous alumina nanotemplates.

Wenchong Hu,Liming Yuan,Zhi Chen,Dawei Gong,Kozo Saito

DOI: https://doi.org/10.1166/jnn.2002.104

2002-01-01

Journal of Nanoscience and Nanotechnology

Abstract:An ethylene-air laminar diffusion flame successfully provided silicon substrates of anodic aluminum oxide (AAO) template with vertically oriented well-aligned carbon nanotubes. Field emission scanning electron microscopy (SEM) showed that open-tipped carbon nanotubes consisting of tube elements with the same length and diameter uniformly coated the template. High-resolution transmission electron microscopy (TEM) analyses revealed these nanotubes to be multiwalled carbon nanotubes, some well graphitized. It was found that cobalt catalyst particles, but not the porous aluminum templates, helped the growth of carbon nanotubes through graphitization and bonding of carbon nanotubes to the silicon substrates.
Field Emission Of Large-Area And Graphitized Carbon Nanotube Array On Anodic Aluminum Oxide Template

Han Gao,Cheng Mu,Fan Wang,Dongsheng Xu,Kai Wu,Youchang Xie,Shuang Liu,Enge Wang,Jun Xu,Dapeng Yu

DOI: https://doi.org/10.1063/1.1564882

IF: 2.877

2003-01-01

Journal of Applied Physics

Abstract:Large-area, graphitized, and patterned carbon nanotube (CNT) arrays were prepared via cracking of ethylene on an open-ended anodized aluminum oxide (AAO) template that also served as a catalyst. With ion-milling and gold coating techniques, ohmic contact between the CNTs and electrode for field emission measurements was greatly improved. In both tip-plane and plane-plane field emitting experiments, the CNTs/AAO displayed a low turn-on field of similar to2.8 V/mum, a high maximum emitting current density of similar to24 mA/cm(2), and a fairly good emitting stability. (C) 2003 American Institute of Physics.
Formation Mechanism of Alumina Nanotubes and Nanowires from Highly Ordered Porous Anodic Alumina Template

YF Mei,GG Siu,RKY Fu,P Chen,XL Wu,TF Hung,PK Chu,Y Yang

DOI: https://doi.org/10.1063/1.1846137

IF: 2.877

2005-01-01

Journal of Applied Physics

Abstract:Alumina nanotube (ANT) and nanowire (ANW) arrays were produced from highly ordered porous anodic alumina (PAA) by etching in phosphoric acid and subsequent thermal treatment. The domain structures that have small sizes provide more boundaries and break the hexagonal symmetry of the PAA template, thereby inducing star-like splitting modes. Using very thin PAA films, ANTs and their arrays are fabricated, whereas ANWs and their arrays are produced when using thick films. This is due to the thin wall between nanopores. Our results provide some mechanistic and fundamental information pertaining to the fabrication of nanostructures via a PAA template.
In Situ Template Synthesis of TiO<sub>2</sub> Nanotube Array Films

Wu Feng Jiang,Yun Han Ling,Su Ju Hao,Hong Yi Li,Xin De Bai,Da Qiang Cang

DOI: https://doi.org/10.4028/www.scientific.net/kem.336-338.2200

2007-01-01

Key Engineering Materials

Abstract:Anodic aluminum oxide (AAO) is commonly used as a starting template for fabrication of several kinds of functional nanoscale devices due to its homogeneous nanohole structure with high aspect ratio. In this paper, high density and uniform titanium dioxide nanotube array films were prepared via liquid phase deposition method by immersing the AAO templates in an aqueous ammonium hexafluorotitanate solution. The phase and microstructure of the nanotube array films were characterized by X-ray diffraction and field-emission scanning electron microscopy. It was found that the mean inner diameters of nanotube are 40-100 nm, mainly depended on different templates and post treatment condition; the phase of as-deposited TiO2 array film was amorphous, while it became anatase at above 400°C.

Comparison of the induction of hepatic peroxisome proliferation by the herbicide oxadiazon in vivo in rats, mice, and dogs and in vitro in rat and human hepatocytes.

Interaction of Janus kinases JAK-1 and JAK-2 with the insulin receptor and the insulin-like growth factor-1 receptor.

Preparation and Modification of Well-Aligned CNTs Grown on AAO Template

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

The growth of carbon nanostructures in the channels of aligned carbon nanotubes

Controlled growth of carbon nanotubes in diameter and shape using template-synthesis method

Controlled Synthesis of Anatase Tio2 Nanotube and Nanowire Arrays Via Aao Template-Based Hydrolysis

Fabrication and characterization of highly ordered nanotubes of anodic aluminum oxide

Controlling the anodizing conditions in preparation of an nanoporous anodic aluminium oxide template

Rapid Growth of Aligned Cnts on Aao Template and Its Sonication Cutting

Growth of Well-Aligned Carbon Nanotube Arrays on Silicon Substrates Using Porous Alumina Film As a Nanotemplate

Template-confined growth and structural characterization of amorphous carbon nanotubes

Controlling Growth of Aligned Carbon Nanotubes from Porous Silicon Templates

Preparation of Anodic Aluminum Oxide (AAO) Nano-Template on Silicon and Its Application to One-Dimensional Copper Nano-Pillar Array Formation

In-situ template synthesis of TiO2 nanotube array films

Synthesis of silicon nanotubes with cobalt silicide ends using anodized aluminum oxide template

Freestanding Macroscopic Metal-Oxide Nanotube Films Derived from Carbon Nanotube Film Templates

Fabrication and characterization of vertically aligned carbon nanotubes on silicon substrates using porous alumina nanotemplates.

Field Emission Of Large-Area And Graphitized Carbon Nanotube Array On Anodic Aluminum Oxide Template

Formation Mechanism of Alumina Nanotubes and Nanowires from Highly Ordered Porous Anodic Alumina Template

In Situ Template Synthesis of TiO&lt;sub&gt;2&lt;/sub&gt; Nanotube Array Films

In Situ Template Synthesis of TiO<sub>2</sub> Nanotube Array Films