Abstract:This article studies the impact of intrinsic nonlinearities on the system-level performance of piezoelectric vibration energy harvesters. The study focuses on harvester operation involving realistic large accelerations at the frequency of its designed linear resonance. It is experimentally observed that two intrinsic nonlinearities are required for nonlinear modeling, namely a mechanical (Duffing) nonlinearity and a piezoelectric-coupling nonlinearity. One goal of this article is to develop a modeling and analysis framework that enables the study of these nonlinearities as they interact with realistic interface circuits. Another goal is to use the framework for benchmarking performance differences between linear harvesters and their nonlinear counterparts. To these ends, this article: 1) presents an accurate equivalent circuit model of piezoelectric vibration energy harvesting (PVEH) systems that captures the aforementioned intrinsic nonlinearities; 2) demonstrates model validity over varying levels of nonlinearity (induced by varying vibration acceleration) through ac-input–ac-output experiments; and 3) employs harmonic balance analysis to study the impact of each nonlinearity on optimized system output power and voltage with optimal load–impedance tuning. Key findings of this article are: 1) both nonlinearities reduce maximum output power at resonance despite optimal tuning and 2) nonlinearities cause additional terminal voltage build-up under tuning for optimal power. Practical voltage constraints on the interface electronics limit the tuning range due to voltage buildup, further degrading output power. For both reasons, a purposely designed linear piezoelectric vibration energy harvester is a better choice vis-a-vis its nonlinear counterpart for applications targeting maximum output power at nominal linear resonance frequency even in the presence of large accelerations.

Piezoelectric monolayers as nonlinear energy harvesters

Piezoelectric energy harvesting with a nonlinear energy sink

Design, development, and theoretical and experimental tests of a nonlinear energy harvester via piezoelectric arrays and motion limiters

2D Materials as Effective Cantilever Piezoelectric Nano Energy Harvesters

Nonlinear Piezoelectric Energy Harvester: Experimental Output Power Mapping

Impact of Duffing and Piezoelectric-Coupling Nonlinearities on Piezoelectric Vibration Energy Harvesting

Broadband Energy Harvesting by Exploiting Nonlinear Oscillations Around the Second Vibration Mode of A Rectangular Piezoelectric Bistable Laminate

Piezoelectric Energy Harvesting from Two-Dimensional Boron Nitride Nanoflakes

Investigation of Nonlinear Piezoelectric Energy Harvester for Low-Frequency and Wideband Applications

Low frequency piezoelectric energy harvesting at multi vibration mode shapes

Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations

A MEMS-scale vibration energy harvester based on coupled component structure and bi-stable states

Analytical Modelling of a Plucked Piezoelectric Bimorph for Energy Harvesting

MEMS piezo cantilever for vibration energy harvesting

Soybean-inspired nanomaterial-based broadband piezoelectric energy harvester with local bistability

Piezoelectric boron nitride nanosheets for high performance energy harvesting devices

Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

Integrated a nonlinear energy sink and a piezoelectric energy harvester using simply-supported bi-stable piezoelectric composite laminate

A piezoelectric buckling beam-type bistable energy harvester under rotational excitations

Experimental and simulation of a tension-like nonlinear piezoelectric energy harvester

Piezoelectric energy harvester for wind turbine blades based on bistable response of a composite beam in post-buckling