Abstract:Field observations frequently demonstrate stress fluctuations resulting from the reservoir depletion. The development of reservoirs, particularly the completion of infill wells and refracturing, can be significantly impacted by stress changes in and around drainage areas. Previous studies mainly focus on plane fractures and few studies consider the influence of complex transport and storage mechanism and irregular fracture geometry on stress evolution in shale gas reservoirs. Based on the embedded discrete fracture model (EDFM) and finite-volume method (FVM), a coupled geomechanics/fluid model has been successfully developed considering the adsorption, desorption, diffusion and slippage of shale gas. This model achieves coupling simulation of natural fractures, hydraulic fractures with complex geometry, storage and transport mechanism, reservoir stress, and pore-elastic effect. The open-source software OpenFOAM is used as the main solver for this model. The stress calculation and productivity simulation of the model are verified by the classical poroelasticity problem and the simulation results of published research and commercial simulator with EDFM respectively. The simulation results indicate that σ xx , σ yy , σ xy and Δσ changes with time and space due to the time effect and anisotropy of formation pressure depletion; Due to the influence of different mechanisms on shale gas storage and transport, the reservoir pressure and stress distribution under different mechanisms are different; Among them, the stress with full mechanisms differs the most compared to the stress without any mechanism. The reservoir with stronger stress sensitivity (smaller Biot coefficient) is less sensitive to formation pressure depletion, and the stress variation range is smaller. For reservoirs with weak stress sensitivity, formation pressure depletion is more likely to lead to stress reversal. Under the influence of fracture geometry, the pressure depletion regions caused by the three types of fracture geometry are approximately rectangular, parallelogram and square, respectively. The corresponding σ xx , σ yy and Δσ also have great differences in spatial distribution and values. Therefore, the time effect, shale gas storage and transport mechanism and the influence of complex fracture geometry should be considered when predicting pressure depletion induced stress under the condition of simultaneous production. This study is of great significance for understanding the evolution law of stress induced by pressure consumption, as well as the design of infill wells and repeated fracturing.

A new meshless method to solve the two-phase thermo-hydro-mechanical multi-physical field coupling problems in shale reservoirs

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

An efficient numerical simulation of coupled thermo-hydro-mechanical processes in deep shale gas reservoirs

Application of the least-square meshless method to gas-water flow simulation of complex-shape shale gas reservoirs

Production Performance Simulation of the Fractured Horizontal Well Considering Reservoir and Wellbore Coupled Flow in Shale Gas Reservoirs

Development of coupled fluid-flow/geomechanics model considering storage and transport mechanism in shale gas reservoirs with complex fracture morphology

A fully coupled multidomain and multiphysics model for evaluation of shale gas extraction

Fully coupled modeling of two-phase fluid flow and geomechanics in ultra-deep natural gas reservoirs

Hierarchical Modeling of Hydromechanical Coupling in Fractured Shale Gas Reservoirs with Multiple Porosity Scales

Numerical Simulation of Gas-Water Two-Phase Flow in Deep Shale Gas Reservoir Development Based on Mixed Fracture Modeling

Integrated numerical simulation of hydraulic fracturing and production in shale gas well considering gas-water two-phase flow

Production performance simulation of a horizontal well in a shale gas reservoir considering the propagation of hydraulic fractures

Simulation of Shale Gas Reservoir Production Considering the Effects of the Adsorbed Water Layer and Flow Differences

Multiple hydraulic fracture propagation simulation in deep shale gas reservoir considering thermal effects

Comprehensive modeling of multiple transport mechanisms in shale gas reservoir production

An improved mathematical model of gas–water two-phase flows in fractured horizontal wells accounting for physical contact behaviors of fractures with total factor characteristics

Macroscale Gas–Water Two-Phase Transport Simulation in Shales considering Nanomicroscale Effects

Characterization of Multiphase Flow in Shale Oil Reservoirs Considering Multiscale Porous Media by High-Resolution Numerical Simulation

Life cycle integrated flow simulation for hydraulic fracturing horizontal wells in shale gas reservoirs

A two-phase flow model coupled with geomechanics for simulating transient production behaviour in an unconventional reservoir by considering fracture geometry and capillary pressure

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics