Abstract:Background: Instrumented posterior lumbar fusion with top-loading pedicle screw systems (PSS) requires fully tightened set screws to achieve a secure fixation and symmetric load condition. This assumes a complete reduction of the rod by 90°, which is not always attainable in situ, especially under constraint. The objective of this work is to compare the mechanical performance of different innovative set screw technologies, which should improve the tightening process. Hypothesis: The hypotheses of the study are that modifications to the screw and screwdriver unit can (1) improve the quality of set screw tightening and (2) increase the axial gripping capacity of the construct. Materials and methods: The four set screw technologies under investigation include a standard set screw with a flat surface (F-S; control group), a set screw with a convex surface (C-S) and a shaft tip method screwdriver used in combination with both flat (F-STM) and convex set screws (C-STM). The quality of set screw tightening is categorized as follows: failed=the rod is not completely reduced; reduced=the rod is successfully reduced but the set screw is not correctly fixed; good=remaining cases. An axial gripping capacity test is performed by a universal testing machine (Instron®) with a force capacity of 5kN. Results: Regarding the quality of set screw tightening, comparisons between F-S vs. F-STM, F-S vs. C-STM and between C-S vs. C-STM show statistically significant differences (p<0.001). The axial gripping capacity test shows mean gripping forces of 1223N (STD 331) in the F-STM group and of 1724N (STD 168) in the C-STM group with statistically significant differences between both groups (p=0.003). Discussion: Several biomechanical and clinical case studies have identified possible effects of misaligned rod-screw interfaces such as screw pull-out during rod reduction, screw loosening, screw or rod breakage, misalignment, adjacent segment degeneration and worsening of the clinical outcome. C-STM-technology thus supports controlled fixation in the sense of applying appropriate forces for correction or fixation during PSS assembly as well as friction-reduced final alignment and tightening with the aim to reduce implant loosening, hardware failure and reoperations, while respecting anatomical and biomechanical balance.

Reducing residual forces in spinal fusion using a custom-built rod bending machine

Towards Biomechanical Evaluation of a Transformative Additively Manufactured Flexible Pedicle Screw for Robotic Spinal Fixation

Quantitative Biomechanical Evaluation for Optimal Spinal Instrumentation to Prevent Mechanical Complications in Spinal Fusion from the Lower Thoracic Spine to the Pelvis for Adult Spinal Deformity: A Finite Element Analysis

Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement

Preoperative Robotics Planning Facilitates Complex Construct Design in Robot-Assisted Minimally Invasive Adult Spinal Deformity Surgery—A Preliminary Experience

Evaluation of the reduction, tightening and gripping performance of an innovative set screw technology for instrumented posterior lumbar fusion: A biomechanical study

A cadaveric precision and accuracy analysis of augmented reality-mediated percutaneous pedicle implant insertion

Robot-Assisted Versus Freehand Instrumentation in Short-Segment Lumbar Fusion: Experience with Real-Time Image-Guided Spinal Robot

Monolithic superelastic rods with variable flexural stiffness for spinal fusion: simplified finite element analysis of an instrumented spine segment

Validation of a patient-specific finite element analysis framework for identification of growing rod-failure regions in early onset scoliosis patients

Leveraging Compliance to Design a Minimally Invasive, Expandable Interbody Cage Capable of Customized Anatomical Fit for Spinal Fusion Surgery

Inroads Toward Robot-Assisted Internal Fixation of Bone Fractures Using a Bendable Medical Screw and the Curved Drilling Technique

Evaluation of a New Spinal Surgical Robotic System of Kirschner Wire Placement for Lumbar Fusion: A Multi‐centre, Randomised Controlled Clinical Study

Anatomically and mechanically conforming patient-specific spinal fusion cages designed by full-scale topology optimization

Towards Biomechanics-Aware Design of a Steerable Drilling Robot for Spinal Fixation Procedures with Flexible Pedicle Screws

Effects of pre-contoured and in situ contoured rods on the mechanical strength and durability of posterior cervical instrumentation: a finite-element analysis and scanning electron microscopy investigation

Sensorless based Haptic Feedback Integration in Robot-Assisted Pedicle Screw Insertion for Lumbar Spine Surgery: A Preliminary Cadaveric Study

Biomechanical evaluation and optimal design of a pedicle screw with double bent rods internal fixation system based on PE-PLIF fusion

Spatial Spinal Fixation: A Transformative Approach Using a Unique Robot-Assisted Steerable Drilling System and Flexible Pedicle Screw

A Robotic System For Spine Surgery Positioning And Pedicle Screw Placement

Application and Evaluation of an Independent Robotic Arm System in K-wire Placement for Lumbar Fusion