Abstract:Cold plasma-driven (multi-walled carbon nanotubes) MWCNTs as a hybrid process were operated to eliminate antibiotics from contaminated aqueous solutions. XRD, BET-BJH, FTIR, Raman, FESEM, and TEM analyses were performed to determine the catalyst characteristics. The results demonstrated that using the MWCNT as a catalyst enhanced the formation of hydroxyl radicals, ozone molecules, and active oxygen groups on the surface. Also, by applying plasma, the dispersion of catalyst components in the solution medium increases; the oxidation process in the solution occurs more actively and it leads to further decomposition of ozone molecules, hydroxide, and peroxide radicals; the specific surface area increases; and so, the adsorption of pollutant molecules increases, MWCNT provides a suitable position to create more micro-discharges, and as a result, the number of active species increases, and MWCNT increases the lifetime of reactive species. So, the excellent performance of the hybrid process obtained for the degradation of aqua solutions of ciprofloxacin (CIP) (90.6%), ofloxacin (OFL) (83.0%), and levofloxacin (LVO) (72.4%) in concentration of 80 mg/L for 60 min. However, the percentage removal rate decreased with increase in initial antibiotic concentration. In the ciprofloxacin concentrations of 80, 110 and 170 mg/L, the efficiency degradations were 90.6, 65.7, and 54.0%, respectively. By increasing the amount of MWCNT catalyst, the removal performance improves. The percentage removal in the presence of MWCNT at the levels of 0.25, 0.5 and 2.5 g/L was equal to 85.0, 90.6, and 98.7%, respectively. The use of MWCNT activates the oxidation process and increases the specific surface area. As the amount of catalyst increases, more substrate is provided for the generation of reactive oxygen species to stimulate the contaminant removal. Examination of different pHs showed that the effect of this parameter depends on the molecular structure between the particles. The results show that the removal percentage of CIP (ciprofloxacin) is 55.6, 90.6 and 86.5% at pH 2, 6 and 11, respectively. And, the study of gas type in contact with the aqueous shows plasma in percent oxygen has high efficiency (90.6%) rather than air (40.7%) after 60 min. Also, for reusability, the used catalyst (MWCNT) was investigated in four cycles, and finally, the mechanism of reactions that occurred in the solution was proposed.

Synergistic removal of aqueous ciprofloxacin hydrochloride by water surface plasma coupled with peroxymonosulfate activation

Degradation of Ciprofloxacin Using Α-Mno2 Activated Peroxymonosulfate Process: Effect of Water Constituents, Degradation Intermediates and Toxicity Evaluation

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Mutual enhancement of metal coagulant and peroxymonosulfate for ciprofloxacin removing and the multiple-mode mechanisms

Underwater bubbling plasma assisted with persulfate activation for the synergistic degradation of tetracycline hydrochloride

Activation of peroxymonosulfate for ciprofloxacin degradation by a novel oxygen-deficient CoTiO 3 /TiO 2 NTs/Ti composite catalytic membrane:Electron transfer pathway and underlying mechanism

Ultra-fast degradation of ciprofloxacin by the peroxymonosulfate activation using a Co/Al-LDH decorated magnetic hydrochar: Structural design, catalytic performance and synergistic effects

Edge interface microenvironment regulation of CoOOH/commercial activated carbon nano-hybrids enabling PMS activation for degrading ciprofloxacin

Zinc-based metal–organic framework nanofibers membrane ZIF-65/PAN as efficient peroxymonosulfate activator to degrade aqueous ciprofloxacin

Removal of ciprofloxacin by biosulfurized nano zero-valent iron (BP–S-nZVI) activated peroxomonosulfate: Influencing factors and degradation mechanism

Enhanced peroxymonosulfate activation for rapid degradation of ciprofloxacin using a novel ternary ZIF-67@MnOOH@GO composite

Hydrogel 3D Network Derived and In-Situ Magnetized Fe@C for Activation of Peroxymonosulfate to Degrade Ciprofloxacin

Photo-assisted peroxymonosulfate activation with the heterostructure of ZIF-67@MIL-100(Fe) for ciprofloxacin degradation: Reactivity, stability, and synergistic mechanisms

Degradation of ciprofloxacin by magnetic CuS/MnFe 2 O 4 catalysts efficiently activated peroxymonosulfate

Multi-targeted removal of coexisted antibiotics in water by the synergies of radical and non-radical pathways in PMS activation

Removal evolution of ciprofloxacin, ofloxacin, and levofloxacin contaminants via synergic influence of cold plasma-driven MWCNTs hybrid process: evaluation of operational parameters

Ciprofloxacin Degradation with Persulfate Activated with the Synergistic Effect of the Activated Carbon and Cobalt Dual Catalyst

Activation of peroxymonosulfate by catalysts derived from water treatment plant sludge for the simultaneous removal of Disperse Blue 56 and phosphates

Insight into peroxymonosulfate assisted photocatalysis over Fe2O3 modified TiO2/diatomite composite for highly efficient removal of ciprofloxacin

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Highly efficient activation of peroxymonosulfate by MOF derived CoS2@C for degradation of ciprofloxacin