Abstract:mpg-C3N4/anatase TiO2 with reactive {001} facets composites were synthesized via a facile ultrasonic dispersion method. Incorporation of mpg-C3N4 into anatase TiO2 was successfully confirmed by X-ray diffraction (XRD). The percentage of exposed {001} facets in TiO2 calculated from the Raman spectra was 80.6%. The microstructure and optical properties of the as-prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, UV-vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectroscopy. The effects of mass ratios of mpg-C3N4/(TiO2 + mpg-C3N4) on the photocatalytic activities of the mpg-C3N4/TiO2 composites were investigated. The photocatalytic experiments indicated that the mpg-C3N4/TiO2 composites showed a much higher photocatalytic activity than the pristine TiO2 and mpg-C3N4 for the degradation of methylene blue (MB) under UV light and visible light irradiation. This enhancement should be attributed to the reactive {001} facets of TiO2 and the heterojunction formed at the interface between anatase TiO2 and mpg-C3N4, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Compared with the decolorization process, mineralization is slower. The degradation of 2,4-dichlorophenol suggests that the dye sensitization is not the main cause of dye degradation. In addition, the quenching effects of different scavengers proved that the superoxide radicals (O-center dot(2)-) and holes (h(+)) were the main factors for the improved photoactivity under UV-light, while the superoxide radicals (O-center dot(2)-) play important roles in the photocatalytic reaction under visible light irradiation. Repeatability experiments of MB degradation suggest that the mpg-C3N4/TiO2 composites have high stability. The photocatalytic degradations of MB, RhB and MO were measured under UV and visible light irradiation and the photocatalytic degradation efficiency was found to be in the decreasing order of RhB > MB > MO. These results indicate that the incorporation of mpg-C3N4 into anatase TiO2 with reactive {001} facets is an effective method to improve the photocatalytic activity under both UV and visible light.

Photocatalytic degradation of 2,4-dichlorophenol with MgAlTi mixed oxides catalysts obtained from layered double hydroxides

Photocatalytic performance of ZnAl vs ZnAlTi in the degradation of 2,4-dichlorophenoxyacetic acid herbicide

Enhanced photocatalytic degradation of rhodamine B, methylene blue and 4-nitrophenol under visible light irradiation using TiO2/MgZnAl layered double hydroxide

Ternary MgAlFe‐Layered Double Hydroxide: Synthesis, Characterization, and Application in Photocatalytic Degradation

Photocatalytic Degradation of Malachite Green by Layered Double Hydroxide Based Composites

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Fabrication of ZnAl-LDH mixed metal-oxide composites for photocatalytic degradation of 4-chlorophenol

Photocatalytic activity of the biogenic mediated green synthesized CuO nanoparticles confined into MgAl LDH matrix

Preparation and application of metal ion-doped CoMgAl-hydrotalcite visible-light-driven photocatalyst

High performance of δ-Fe2O3 novel photo-catalyst supported on LDH structure

Study on the Synthesis and Photocatalytic Performance of Modified TiO2 Supported by G‐C3N4 in the Degradation of 2,4‐Dichlorophenoxyacetic Acid

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

Synthesis of CuAl-layered double hydroxide/MgO2 nanocomposite catalyst for the degradation of organic dye under dark condition

Efficient photodegradation of phenol in wastewater using ZnAl–Bi photocatalysts analysing the effect of Bi content on ZnAl LDH synthesized in one step

Green phenol hydroxylation by ultrasonic-assisted synthesized Mg/Cu/Al-LDH catalyst with different molar ratios of Cu2+/Mg2+

Fe-Ce/Layered Double Hydroxide Heterostructures and Their Derived Oxides: Electrochemical Characterization and Light-Driven Catalysis for the Degradation of Phenol from Water

Promoting Effect of MgO in the Photodegradation of Methylene Blue over MgO/MWCNT/TiO2 Photocatalyst

Highly Efficient Pollutants Removal over Mo/Mo2C/CoAl-LDH Heterostructure: Photo-Chemical Co-Driven Peroxymonosulfate Activation and Singlet Oxygen-Dominated Oxidative Decomposition

Mg Doped CuO–Fe2O3 Composites Activated by Persulfate As Highly Active Heterogeneous Catalysts for the Degradation of Organic Pollutants

Automated on-line monitoring of the TiO2-based photocatalytic degradation of dimethyl phthalate and diethyl phthalate

Enhanced photocatalytic degradation of diclofenac by UiO-66/MgAl-LDH: excellent performances and mechanisms