A Fractal Watermark Solution for Product Data

Ke Chen,Gang Chen,Cheng Zang,Jinxiang Dong

DOI: https://doi.org/10.1007/978-3-540-72863-4_65

2006-05-03

Abstract:

What problem does this paper attempt to address?

Topiramate Titration to Response: Analysis of Individualized Therapy Study (TRAITS)

W. Dodson,M. Kamin,Lesley Kraut,W. Olson,Shu-chen Wu

DOI: https://doi.org/10.1345/aph.1C133

2003-05-01

Abstract:OBJECTIVE: To evaluate the relationship between baseline seizure frequency and stabilized topiramate dosage and the effect of individualized treatment on tolerability in adults with partial-onset seizures receiving other antiepileptic drugs (AEDs). METHODS: In this 20-week, open-label trial, dosages of medications were adjusted according to clinical response. Dosage and seizure response data were analyzed for 2 groups defined by baseline seizure frequency: <4 and ≥4 seizures per month. RESULTS: In the outcome evaluable population (n = 471), the mean ± SEM stable topiramate dosage was 303 ± 139 mg/d when baseline seizure frequency was <4 seizures/month and 341 ± 153 mg/d when baseline seizure frequency was ≥4 seizures/month (p = 0.005). The most common adverse events were somnolence (8.5%), fatigue (7.3%), nausea (5.3%), and dizziness (5.0%). Cognitive complaints were reported by <3% of patients. When concomitant AED dosages were reduced, 14% of patients discontinued topiramate due to adverse events compared with 23% if the concomitant AED dosage was unchanged or increased. CONCLUSIONS: When clinicians individualize topiramate dosage according to clinical response, the stabilized topiramate dosage as add-on therapy is influenced by baseline seizure frequency. Topiramate tolerability is improved when dosages of concomitant AEDs are reduced.
Osteosynthesis of Phalangeal Fractures: Biomechanical Comparison of Kirschner Wires, Plates, and Compression Screws

Valentin Rausch,Andreas Harbrecht,Stephanie L Kahmann,Thomas Fenten,Nebojsa Jovanovic,Michael Hackl,Lars P Müller,Manfred Staat,Kilian Wegmann

DOI: https://doi.org/10.1016/j.jhsa.2020.04.010

Abstract:Purpose: The aim of this study was to compare several osteosynthesis techniques (intramedullary headless compression screws, T-plates, and Kirschner wires) for distal epiphyseal fractures of proximal phalanges in a human cadaveric model. Methods: A total of 90 proximal phalanges from 30 specimens (index, ring, and middle fingers) were used for this study. After stripping off all soft tissue, a transverse distal epiphyseal fracture was simulated at the proximal phalanx. The 30 specimens were randomly assigned to 1 fixation technique (30 per technique), either a 3.0-mm intramedullary headless compression screw, locking plate fixation with a 2.0-mm T-plate, or 2 oblique 1.0-mm Kirschner wires. Displacement analysis (bending, distraction, and torsion) was performed using optical tracking of an applied random speckle pattern after osteosynthesis. Biomechanical testing was performed with increasing cyclic loading and with cyclic load to failure using a biaxial torsion-tension testing machine. Results: Cannulated intramedullary compression screws showed significantly less displacement at the fracture site in torsional testing. Furthermore, screws were significantly more stable in bending testing. Kirschner wires were significantly less stable than plating or screw fixation in any cyclic load to failure test setup. Conclusions: Intramedullary compression screws are a highly stable alternative in the treatment of transverse distal epiphyseal phalangeal fractures. Kirschner wires seem to be inferior regarding displacement properties and primary stability. Clinical relevance: Fracture fixation of phalangeal fractures using plate osteosynthesis may have the advantage of a very rigid reduction, but disadvantages such as stiffness owing to the more invasive surgical approach and soft tissue irritation should be taken into account. Headless compression screws represent a minimally invasive choice for fixation with good biomechanical properties.
Giant leap for p53, small step for drug design.

Mary E. Anderson,Peter Tegtmeyer

DOI: https://doi.org/10.1002/BIES.950170103

BioEssays

Abstract:We review the findings of Cho et al. on the crystal structure of a p53 tumor suppressor-DNA complex. The core DNA binding domain of p53 folds into a structure termed a beta-sandwich, which organizes two loops and a loop-sheet-helix structure on one surface of p53 to interact with the consensus DNA recognition sequence of p53. These structures help to explain the functions of wild-type p53 and the effects of tumor-associated mutations on p53 DNA binding, transactivation and suppression of cellular proliferation.
Feasibility of 2-Point Fixation by Absorbable Plates Using the Transoral Approach in Management of the Zygomatic Complex Fractures

Drissa Diarra,Ze-Xing Zhang,Hang Wang,Zhi Li

DOI: https://doi.org/10.1097/scs.0000000000010158

2024-04-30

Journal of Craniofacial Surgery

Abstract:Purpose: The purpose of this study was to retrospectively evaluate the feasibility of 2-point fixation using absorbable plates by the transoral approach in the management of the zygomatic complex (ZMC) fractures. Methods: Twenty-five patients (15 male and 10 female, age range 16 y to 55 y) with Knight and North Group III zygomatic fractures were included in this case series. Open reduction by intraoral approach was performed on these patients, and the fractures were fixed using absorbable plates placed at the zygomaticomaxillary buttress and infraorbital rim. Postoperatively, follow-up was undertaken to evaluate the fracture healing, mouth opening, facial asymmetry, diplopia, and paresthesia. Results: Postoperatively, all patients achieved uneventful healing; facial symmetry and wound healing were achieved, along with sensory recovery involving the infraorbital nerve. Complications such as sensory disturbances, infection, diplopia, malunion, and nonunion were not encountered in these patients. Conclusions: Two-point fixation using absorbable plates by transoral approach can provide sufficient stabilization for Knight and North Group III zygomatic fractures.

surgery
Evaluation of labial versus labio-inferior lines of osteosynthesis using 3D miniplate for fractures of anterior mandible: A finite element analysis with a pilot clinical trial

Keerthana Ponvel,Elavenil Panneerselvam,Sasikala Balasubramanian,V B Krishna Kumar Raja

DOI: https://doi.org/10.1016/j.cjtee.2019.08.001

Abstract:Purpose: The fractures of anterior mandible are subject to severe torsional forces due to muscles acting in opposite directions. 3D miniplate has been suggested as a good alternative by some researchers. However, finite element model (FEM) studies indicate that labio-inferior positioning of two miniplates perpendicular to each other offers better stability as compared to labial positioning. This study aims at combining the advantages of a single 3D miniplate and labio-inferior positioning of two conventional miniplates, which was assessed by finite element analysis along with a pilot clinical trial. Methods: Two FEM models were created using CT data of a 24-year-old patient with Angle class I occlusion: control model with labial plating and study model with labio-inferior plating. The models were processed with MIMICS® (materialise, Leuven, Belgium), CATIA® (Dassault Systemes) and finite element analysis softwares. Parameters adopted for analysis were (1) displacement (mm) of fracture fragments during each screw fixation, (2) lingual splay and post fixation stability of fracture fragments with masticatory load, and (3) stress distribution (MPa) across fracture fragments. Moreover, a pilot clinical trial including five patients with anterior mandible fracture was conducted. The fractures were managed by intraoral open reduction and 3D miniplate fixation in labio-inferior position. Intraoperative interfragmentary gap, post fixation lingual splay and radiographic fracture union and complications were assessed clinically. Results: Labio-inferior plating demonstrated less displacement (mm) of fracture fragments during screw fixation (0.059 vs. 0.079) as well as after application of masticatory load (1.805 vs. 1.860). Negligible lingual splay and less stress distribution (MPa) across fracture fragments (1.860 vs. 1.847) were appreciated in the study group as compared to control group. Clinical trial support the favorable outcome related to intraoperative and postoperative assessment parameters. Conclusion: FEM analysis and clinical trial reveal better results with labio-inferior positioning of 3D miniplate when compared to labial positioning.
Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Dominic Mischler,Jana Felicitas Schader,Jan Dauwe,Lara Tenisch,Boyko Gueorguiev,Markus Windolf,Peter Varga

DOI: https://doi.org/10.3389/fbioe.2022.919721

IF: 5.7

2022-06-23

Frontiers in Bioengineering and Biotechnology

Abstract:Joint-preserving surgical treatment of complex unstable proximal humerus fractures remains challenging, with high failure rates even following state-of-the-art locked plating. Enhancement of implants could help improve outcomes. By overcoming limitations of conventional biomechanical testing, finite element (FE) analysis enables design optimization but requires stringent validation. This study aimed to computationally enhance the design of an existing locking plate to provide superior fixation stability and evaluate the benefit experimentally in a matched-pair fashion. Further aims were the evaluation of instrumentation accuracy and its potential influence on the specimen-specific predictive ability of FE. Screw trajectories of an existing commercial plate were adjusted to reduce the predicted cyclic cut-out failure risk and define the enhanced (EH) implant design based on results of a previous parametric FE study using 19 left proximal humerus models (Set A). Superiority of EH versus the original (OG) design was tested using nine pairs of human proximal humeri ( N = 18, Set B). Specimen-specific CT-based virtual preoperative planning defined osteotomies replicating a complex 3-part fracture and fixation with a locking plate using six screws. Bone specimens were prepared, osteotomized and instrumented according to the preoperative plan via a standardized procedure utilizing 3D-printed guides. Cut-out failure of OG and EH implant designs was compared in paired groups with both FE analysis and cyclic biomechanical testing. The computationally enhanced implant configuration achieved significantly more cycles to cut-out failure compared to the standard OG design ( p < 0.01), confirming the significantly lower peri-implant bone strain predicted by FE for the EH versus OG groups ( p < 0.001). The magnitude of instrumentation inaccuracies was small but had a significant effect on the predicted failure risk ( p < 0.01). The sample-specific FE predictions strongly correlated with the experimental results (R 2 = 0.70) when incorporating instrumentation inaccuracies. These findings demonstrate the power and validity of FE simulations in improving implant designs towards superior fixation stability of proximal humerus fractures. Computational optimization could be performed involving further implant features and help decrease failure rates. The results underline the importance of accurate surgical execution of implant fixations and the need for high consistency in validation studies.

multidisciplinary sciences
Low-profile double plating versus dorsal LCP in stabilization of the olecranon fractures

Stefanie Hoelscher-Doht,A.-M. Kladny,M. M. Paul,L. Eden,M. Buesse,R. H. Meffert

DOI: https://doi.org/10.1007/s00402-020-03473-9

IF: 2.928

2020-05-16

Archives of Orthopaedic and Trauma Surgery

Abstract:Abstract Introduction Proximal ulna fractures are common in orthopaedic surgery. Comminuted fractures require a high primary stability by the osteosynthesis, to allow an early functional rehabilitation as fast as possible, to reduce long-term limitations of range of motion. Classical dorsal plating is related to wound healing problems due to the prominence of the implant. New low-profile double plates are available addressing the soft tissue problems by positioning the plates at the medial and lateral side. This study analysed whether, under high loading conditions, these new double plates provide an equivalent stability as compared to the rigid olecranon locking compression plate (LCP). Materials and methods In Sawbones, Mayo Type IIB fractures were simulated and stabilized by plate osteosyntheses: In group one, two low-profile plates were placed. In group two, a single dorsal plate (LCP) was used. The bones was than cyclically loaded simulating flexion grades of 0°, 30°, 60° and 90° of the elbow joint with increasing tension forces (150 , 150 , 300 and 500 N). The displacement and fracture gap movement were recorded. In the end, in load-to-failure tests, load at failure and mode of failure were determined. Results No significant differences were found for the displacement and fracture gap widening during cyclic loading. Under maximum loading, the double plates revealed a comparable load at failure like the single dorsal plate (LCP). The double plates failed with a proximal screw pull-out of the plate, whereas in the LCP group, in 10 out of 12 specimens the mode of failure was a diaphyseal shaft fracture at the distal plate peak. Conclusion Biomechanically, the double plates are a good alternative to the dorsal LCP providing a high stability under high loading conditions and, at the same, time reducing the soft tissue irritation by a lateral plate position.

surgery,orthopedics
Biomechanical comparison of plate materials and designs for subcondylar fracture fixation: An assessment

Anoushka Gupta,Abir Dutta,Kaushik Dutta,Kaushik Mukherjee

DOI: https://doi.org/10.1101/2023.08.07.552268

2024-01-07

Abstract:The fixation of common mandibular subcondylar fractures is associated with a high complication rate, and the decision of a suitable plate design and material still remains a challenge. Computational models have been developed and verified for understanding mandibular fracture fixation, but most of the investigation has been limited to a simplified model, single force and evaluation of plate-only designs. Using finite elements, we analysed the fracture stability with five materials - Nitinol, Magnesium alloys, two types of Titanium alloys (Ti-6Al-4V and Ti-29Nb-13Ta-4.6Zr) and Stainless Steel 316L, for four types of fixation plate designs. The soft tissues such as periodontal ligament, were included and molar clenching tasks were considered for accurately mimicking the physiological mastication cycle. The maximum principal tensile strain in the mandible was found to be decreasing with an increase in stiffness for most of the cases, except for the trapezoid and strut plates. We attribute the differences between trapezoid/strut and double mini/lambda to the presence of an additional screw near the sigmoid notch in the proximal segment in case of double mini and lambda plates. As the mandible reconstructed with double mini plates had the least interfragmentary gap, the double mini plate was deemed as the most suitable design. The results such as a lower von Mises stress in plates (compared to yield strength) indicated that the anchorage provided by titanium alloys (Ti-6Al-4V and TNTZ) is sufficient for load bearing.

Bioengineering
Usability testing of a novel interlocking three-dimensional miniplate for mandibular angle fractures

Prasetyanugraheni Kreshanti,Aria Kekalih,Ahmad Jabir Rahyussalim,Sugeng Supriadi,Bambang Pontjo Priosoeryanto,Deni Noviana,Mendy Hatibie Oley,Chaula Luthfia Sukasah

DOI: https://doi.org/10.7181/acfs.2024.00290

Abstract:Background: We developed a novel interlocking three-dimensional (3D) miniplate design with an adjustable configuration. As this device is new, surgeons must become familiar with its application. This study evaluated the usability and learning curves associated with the novel interlocking 3D miniplate for mandibular fracture fixation. Methods: The study participants, nine plastic surgeons, were asked to apply an interlocking 3D miniplate and a standard miniplate to polyurethane mandible models. The participants had completed the Basic Craniomaxillofacial Osteosynthesis course during residency and had operated on craniomaxillofacial fractures within the past 5 years. They were instructed to place the interlocking 3D miniplate three times and the standard miniplate once. We assessed the time required for implant placement, the comfort level of the surgeons, and the biomechanical stability of the plates. Biomechanical testing was conducted by subjecting the mandible to forces ranging from 10 to 90 N and the displacement was measured. Results: The results indicate increasing comfort with each attempt at placing the interlocking 3D miniplate, with a significant difference between the first and third attempts. Additionally, a reduction in application time was noted with repeated attempts, suggesting improved efficiency. Biomechanical tests showed comparable stability between the tested plates. Conclusion: Multiple attempts at applying the interlocking 3D miniplate resulted in increased comfort and reduced application time. These findings indicate that, despite its novelty, the interlocking 3D miniplate is relatively straightforward to apply and has a short learning curve. However, surgeons must have specific qualifications to ensure proper training and minimize errors during placement.
Modeling stability post zygomatic fracture reconstruction

Hanieh Arjmand,Jeffrey A Fialkov,Cari M Whyne,Jeffrey A. Fialkov,Cari M. Whyne

DOI: https://doi.org/10.1016/j.bjps.2024.02.002

2024-02-01

Abstract:Zygomaticomaxillary complex (ZMC) fracture repair is one of the most common surgical procedures performed in craniomaxillofacial trauma management. Miniplates and screws are used to stabilize the fractured bone using small local incisions, however, these procedures are not infrequently associated with hardware-related post-operative complications. The amount of fixation hardware utilized varies depending on the fracture pattern and surgical judgment, with three-point fixation being the conventionally accepted treatment. However, limited experimental testing and clinical studies have suggested that ZMC stabilization may be achieved with less than three-point fixation. In this study, we utilized a previously developed finite element modeling approach that allows for detailed bone and muscle representation to study the mechanical behavior of the fractured craniomaxillofacial skeleton (CMFS) under one, two, or three-point fixation of the ZMC. Results suggest that using a miniplate along the infraorbital rim in three-point fixation increases the amount of strain and load transfer to this region, rather than offloading the bone. Two-point (zygomaticomaxillary and zygomaticofrontal) fixation yielded strain patterns most similar to the intact CMFS. One-point (zygomaticofrontal) fixation resulted in higher tensile and compressive strains in the zygomaticofrontal region and the zygomatic arch, along with a higher tensile strain on the zygomatic body. These modeling results provide biomechanical evidence for the concept of over-engineering in the stabilization of facial fractures. Furthermore, they support previous suggestions that less than three-point fixation of ZMC fractures may be adequate to achieve uneventful healing.

surgery
Dorsal Plating, Lateral Plating, and Intramedullary Screw Fixation of Extra-Articular Proximal Phalangeal Fractures: A Cadaveric Biomechanical Comparison

Brahman Sivakumar,David J Graham,Elizabeth Clarke,David J. Graham

DOI: https://doi.org/10.1016/j.jhsa.2023.12.001

IF: 2.342

2024-01-01

The Journal Of Hand Surgery

Abstract:PURPOSE: To provide a biomechanical comparison of dorsal plating, lateral plating and intramedullary screw [IMS] fixation for extra-articular proximal phalangeal fractures.METHODS: Midshaft osteotomies were performed on 36 cadaveric proximal phalanges. The phalanges were fixed by dorsal plating, lateral plating or IMS fixation, and subjected to a four-point bending force. Force was applied to achieve displacement of 1 mm/s, until construct failure or to a maximum of 10 mm of displacement. Clinical failure was defined as 2 mm of displacement, and force required to result in 1 mm and 2 mm of displacement was recorded, as was mode of failure.RESULTS: Dorsal plating [127.5 N ± 52.6; 46.51-229.17] and lateral plating [77.1 N ± 25.1; 48.3-113.8] required significantly greater force to achieve 1 mm of displacement when compared to IMS [41.2 N ± 12.4; 20.6-62.3]. Dorsal plating [339.2 N ± 91.8; 158.5-538.6] required significantly greater force than lateral plating [154.5 N ± 33.8; 99.0 -204.4] and intramedullary screw fixation [110.0 ± 38.6; 51.1-189.3] to result in 2 mm of displacement. Lateral and dorsal plating constructs failed through plate bending, screw cut-out or plate failure, whilst IMS failed via implant deformity. All three constructs required greater force to result in even 1 mm of displacement than what is likely subjected through rehabilitation via active motion.CONCLUSIONS: Lateral plating and IMS fixation offer sufficient stiffness to withstand the likely forces subjected via early active motion without displacement.CLINICAL RELEVANCE: Dorsal plating required significantly greater force than lateral plating and intramedullary screw fixation to achieve 1 mm of displacement when used in extra-articular proximal phalangeal fractures in an in vitro setting. However, all three modalities confer enough stability to likely withstand the forces associated with active range of motion.

surgery,orthopedics
Complex humeral head fractures treated with blocked threaded wires: maintenance of the reduction and clinical results with two different fixation constructs

Stefano Gumina,Vittorio Candela,Giuseppe Giannicola,Luigi Orsina,Daniele Passaretti,Ciro Villani

DOI: https://doi.org/10.1016/j.jse.2018.06.034

Abstract:Background: Locking plates are the gold standard for treatment of 3-part humeral head fractures, although major complications range from 9% to 36%. Percutaneous techniques may allow vascular supply preservation, maintenance of fracture hematoma, scarce blood loss. Many configurations with Kirschner wires can be performed, generating confusion on result interpretation. We studied the correlation between system configuration, stability, and clinical results in patients with 3-part humeral head fractures treated with the same fixation system but with 2 different biomechanical constructs. Materials and methods: There were 52 consecutive patients (19 men, 33 women; mean age, 63.1 [standard deviation, 5.6] years; range, 48-82 years) with Hertel 7 humeral head fractures. Two fixation constructs composed of 3 couples (construct A) or 4 couples (construct B) of blocked threaded wires were used in 17 and 35 patients, respectively. At the final follow-up, the individual relative Constant Score (irCS) and visual analog scale were measured. Radiographic evaluation according to the Bahr criteria was performed. Statistical analysis was performed. Results: The mean follow-up was 22 months. The mean irCS at the final follow-up was 89.7%. The mean irCS in patients treated with construct A and construct B was 86% and 93%, respectively (P = .043). One nonunion and 2 superficial infections occurred (6%). The postoperative reduction was excellent in 97% of patients and remained excellent in 89%. The mean postoperative neck shaft angle was 135.0° (construct A: 134.7°; construct B: 135.1°), and the final neck shaft angle was 132.9° (construct A: 131.3°; construct B: 133.8°; P = .047). Conclusions: The functional and radiologic outcomes obtained with percutaneous fixation or locking plates are similar; however, the percentage of major complications after percutaneous treatment is lower. Results of percutaneous fixation depend on the biomechanical construct.
Randomized Controlled Clinical Trial on Internal Fixation for Fracture of Mandible with Super-High Molecular Weight PDLLA Plates and Screws

曾永光,彭勇,魏世成,郑谦,李伯友,陈垂史,洪煜锐,林继光,熊成东,杨德娟

DOI: https://doi.org/10.3760/cma.j.issn.1008-6706.2005.06.001

2004-01-01

Abstract:PURPOSE:To evaluate the clinical value of internal fixation of mandibular fractures with super-high molecular weight PDLLA plates and screws. METHODS:A total of 57 cases of mandibular fracture were randomly divided into two groups , and each group was treated with super-high molecular weight poly-Lactide acid plates and titanium plates respectively. The duration of intermaxillary fixation ranged from 0 to 14 days. Patients were evaluated for complications,wound healing,fracture reduction and occlusion recovery. RESULTS:After the internal fixation with PDLLA plates, all of the fragments had a good stability and normal bone healing. Four patients (12.9 percent) in the PDLLA group experienced complication of premature occlusal contact, and no inflammatory complications and foreign body reactions were found. Four patients (15.4 percent) in the titanium group experienced complications of infection (one patient) and premature occlusal contact (three patient). Clinical function of the two groups had non significant difference (chi-square test, P0.05). CONCLUSION:Bioabsorbable PDLLA plates and screws can be selectively used for internal fixation in single linear mandibular fractures, with the advantage that they do not need to be removed.
Biomechanical comparison of three fixation strategies for radial head fractures: a biomechanical study

Yao-Tung Tsai,Kun-Jhih Lin,Jui-Cheng Lin

DOI: https://doi.org/10.1515/bmt-2023-0107

2023-10-27

Abstract:Second-generation headless compression screws (HCSs) are commonly used for the fixation of small bones and articular fractures. However, there is a lack of biomechanical data regarding the application of such screws to radial head fractures. This study evaluated the mechanical properties of the fixation of radial head fractures using a single oblique HCS compared with those obtained using a standard locking radial head plate (LRHP) construct and a double cortical screw (DCS) construct. Radial synbone models were used for biomechanical tests of HCS, LRHP, and DCS constructs. All specimens were first cyclically loaded and then loaded to failure. The stiffness for the LRHP group was significantly higher than that for the other two groups, and that for the HCS group was significantly higher than that for the DCS group. The LRHP group had the greatest strength, followed by the HCS group and then the DCS group. The HCS construct demonstrated greater fixation strength than that of the commonly used cortical screws, although the plate group was the most stable. The present study revealed the feasibility of using a single oblique HCS, which has the advantages of being buried, requiring limited wound exposure, and having relatively easy operation, for treating simple radial head fractures.
Experimental validation of finite element simulation of a new custom-designed fixation plate to treat mandibular angle fracture

Xu Xu,Kang-jie Cheng,Yun-feng Liu,Ying-ying Fan,Joanne H. Wang,Russell Wang,Dale A. Baur,Xian-feng Jiang,Xing-tao Dong

DOI: https://doi.org/10.1186/s12938-021-00851-1

2021-02-05

BioMedical Engineering OnLine

Abstract:Abstract Background The objective of the study was to validate biomechanical characteristics of a 3D-printed, novel-designated fixation plate for treating mandibular angle fracture, and compare it with two commonly used fixation plates by finite element (FE) simulations and experimental testing. Methods A 3D virtual mandible was created from a patient’s CT images as the master model. A custom-designed plate and two commonly used fixation plates were reconstructed onto the master model for FE simulations. Modeling of angle fracture, simulation of muscles of mastication, and defining of boundary conditions were integrated into the theoretical model. Strain levels during different loading conditions were analyzed using a finite element method (FEM). For mechanical test design, samples of the virtual mandible with angle fracture and the custom-designed fixation plates were printed using selective laser sintering (SLS) and selective laser melting (SLM) printing methods. Experimental data were collected from a testing platform with attached strain gauges to the mandible and the plates at different 10 locations during mechanical tests. Simulation of muscle forces and temporomandibular joint conditions were built into the physical models to improve the accuracy of clinical conditions. The experimental vs the theoretical data collected at the 10 locations were compared, and the correlation coefficient was calculated. Results The results show that use of the novel-designated fixation plate has significant mechanical advantages compared to the two commonly used fixation plates. The results of measured strains at each location show a very high correlation between the physical model and the virtual mandible of their biomechanical behaviors under simulated occlusal loading conditions when treating angle fracture of the mandible. Conclusions Based on the results from our study, we validate the accuracy of our computational model which allows us to use it for future clinical applications under more sophisticated biomechanical simulations and testing.

engineering, biomedical
Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair

Pawel Brzozowski,Clayton Inculet,Emil H. Schemitsch,Radovan Zdero

DOI: https://doi.org/10.1016/j.clinbiomech.2024.106296

IF: 2.034

2024-06-24

Clinical Biomechanics

Abstract:Background This study experimentally validated a computationally optimized screw number and screw distribution far cortical locking distal femur fracture plate and compared the results to traditional implants. Methods 24 artificial femurs were osteotomized with a 10 mm fracture gap 60 mm proximal to the intercondylar notch. Three fixation constructs were used. (i) Standard locking plates secured with three far cortical locking screws inserted according to a previously optimized distribution in the femur shaft ( n = 8). (ii) Standard locking plates secured with four standard locking screws inserted in alternating plate holes in the femur shaft (n = 8). (iii) Retrograde intramedullary nail secured proximally with one anterior-posterior screw and distally with two oblique screws (n = 8). Axial hip forces (700 and 2800 N) were applied while measuring axial interfragmentary motion, shear interfragmentary motion, and overall stiffness. Findings Experimental far cortical locking plate results compared well to published computational findings. Far cortical locking femurs contained the highest axial motion within the potential ideal range of 0.2–1 mm and a sheer-to-axial motion ratio < 1.6 at toe-touch weight-bearing (700 N). At full weight-bearing (2800 N), Standard locking-plated femurs had the only axial motion within 0.2–1 mm but had an excess shear-to-axial motion ratio. Nail-implanted femurs underperformed at both forces. Interpretation For toe-touch weight-bearing, the far cortical locking construct provided optimal biomechanics to allow moderate motion, which has been suggested to encourage early callus formation. Conversely, at full weight-bearing, the standard locking construct offered the biomechanical advantage on fracture motion.

engineering, biomedical,orthopedics,sport sciences
Plate osteosynthesis combined with bone cement provides the highest stability for tibial head depression fractures under high loading conditions

Philipp Heilig,Lars-Christopher Faerber,Mila M Paul,Eva Kupczyk,Rainer H Meffert,Martin C Jordan,Stefanie Hoelscher-Doht

DOI: https://doi.org/10.1038/s41598-022-19107-6

2022-09-14

Abstract:Older patients sustaining tibial head depression fractures often cannot follow the post-operative rehabilitation protocols with partial weight-bearing of the affected limb, leading to osteosynthesis failure, cartilage step-off and arthritis development. Therefore, the aim of this study was to analyse the biomechanical performance of different types of osteosyntheses alone and in combination with bone cement simulating cyclically high loading conditions of tibial head depression fractures. Lateral tibial head depression fractures (AO: 41-B2.2; Schatzker type III) were created in synthetic bones and stabilized using three different osteosyntheses alone and in combination with a commonly used bone cement (chronOS™): 2 screws, 4 screws in the jail technique and a lateral angle-stable buttress plate. After fixation, the lateral tibial plateau was axially loaded in two, from each other independent testing series: In the first test protocol, 5000 cycles with 500 N and in the end load-to-failure tests were performed. In the second test protocol, the cyclic loading was increased to 1000 N. Parameters of interest were the displacement of the articular fracture fragment, the stiffness and the maximum load. The osteosyntheses revealed a higher stiffness in combination with bone cement compared to the same type of osteosynthesis alone (e.g., 500 N level: 2 screws 383 ± 43 N/mm vs. 2 screws + chronOs 520 ± 108 N/mm, increase by 36%, p < 0.01; 4 screws 368 ± 97 N/mm vs. 4 screws + chronOS 516 ± 109 N/mm, increase by 40%, p < 0.01; plate: 509 ± 73 N/mm vs. plate + chronOs 792 ± 150 N/mm, increase by 56%, p < 0.01). Bone cement reduced the displacement of the plate significantly (500 N level: plate: 8.9 ± 2.8 mm vs. plate + chronOs: 3.1 ± 1.4 mm, reduction by 65%, p < 0.01; 1000 N level: 16.9 ± 3.6 mm vs 5.6 ± 1.3 mm, reduction by 67%, p < 0.01). Thus, the highest stiffness and lowest displacement values were found when using the plate with bone cement in both loading conditions (500 N level: 2 screws + chronOs 3.7 ± 1.3 mm, 4 screws + chronOs 6.2 ± 2.4 mm; 1000 N level: 2 screws + chronOs 6.5 ± 1.2 mm, 4 screws + chronOs 5.7 ± 0.8 mm). From a biomechanical perspective, plate osteosynthesis of tibial head depression fractures should always be combined with bone cement, provides higher stability than 2-screw and 4-screw fixation and is a valid treatment option in cases where extraordinary stability is required.
Application of Biodegradable Plates for Treating Pediatric Mandibular Fractures.

Jingang An,Pengcheng Jia,Yi Zhang,Xi Gong,Xiaodong Han,Yang He

DOI: https://doi.org/10.1016/j.jcms.2015.03.002

IF: 3.192

2015-01-01

Journal of Cranio-Maxillofacial Surgery

Abstract:Objective: We assessed the clinical results of a biodegradable plate system for the internal fixation of mandibular fractures in children, and observed the imaging features of fracture healing and bone changes around the biodegradable plates and screws during follow-up.Patients and methods: We enrolled 39 patients (22 male, 17 female, average age 4 years 10 months) with different mandibular fractures. We used 2.0-mm resorbable plates to repair the fractures. Postoperative follow-up ranged from 6 months to 5 years; average follow-up was 1 year 2 months. The outcome measures identified and assessed included facial symmetry, mouth opening, occlusal relationship, infection, nonunion, malunion, and plate dehiscence.Results: We fixed 42 fractures with 43 resorbable plates; the fracture site of one patient (aged 11 years 3 months) was fixed with two plates. Two patients developed small fistulas at the intraoral incision 2 months after surgery; the fistulas healed after 1 month without special treatment. In the other patients, the incision healed well, there was facial symmetry, mouth opening was >35 mm, and occlusion was good. Follow-up computed tomography examination data were available for 20 cases, and revealed different degrees of radiolucency indicating that osteolysis had occurred. Radiolucency was observed around the resorbable plates 1 month after the surgery. The extent and depth of the radiolucent region were obvious within 1 year of surgery. In the second year, there were obvious repairs, with the bony defect areas becoming shallower. After 2 years, the bony defect areas had almost disappeared.Conclusion: Biodegradable fixation devices are safe and efficient for treating pediatric mandibular fractures. Osteolysis commonly follows biodegradable fixation of pediatric mandibular fractures, and has no adverse effect on fracture healing. (C) 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Is implant choice associated with fixation strength for displaced radial neck fracture: a network meta-analysis of biomechanical studies

Yu-Cheng Su,Ying-Yu Wang,Ching-Ju Fang,Wei-Ren Su,Fa-Chuan Kuan,Kai-Lan Hsu,Chih-Kai Hong,Min-Long Yeh,Chii-Jeng Lin,Yu-Kang Tu,Chien-An Shih

DOI: https://doi.org/10.1038/s41598-023-33410-w

IF: 4.6

2023-04-27

Scientific Reports

Abstract:Abstract The multitude of fixation options for radial neck fractures, such as pins, screws, biodegradable pins and screws, locking plates, and blade plates, has led to a lack of consensus on the optimal implant choice and associated biomechanical properties. This study aims to evaluate the biomechanical strength of various fixation constructs in axial, sagittal, and torsional loading directions. We included biomechanical studies comparing different interventions, such as cross/parallel screws, nonlocking plates with or without augmented screws, fixed angle devices (T or anatomic locking plates or blade plates), and cross pins. A systematic search of MEDLINE (Ovid), Embase, Scopus, and CINAHL EBSCO databases was conducted on September 26th, 2022. Data extraction was carried out by one author and verified by another. A network meta-analysis (NMA) was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines. Primary outcomes encompassed axial, bending, and torsional stiffness, while the secondary outcome was bending load to failure. Effect sizes were calculated for continuous outcomes, and relative treatment ranking was measured using the surface under the cumulative ranking curve (SUCRA). Our analysis encompassed eight studies, incorporating 172 specimens. The findings indicated that fixed angle constructs, specifically the anatomic locking plate, demonstrated superior axial stiffness (mean difference [MD]: 23.59 N/mm; 95% CI 8.12–39.06) in comparison to the cross screw. Additionally, the blade plate construct excelled in bending stiffness (MD: 32.37 N/mm; 95% CI − 47.37 to 112.11) relative to the cross screw construct, while the cross-screw construct proved to be the most robust in terms of bending load failure. The parallel screw construct performed optimally in torsional stiffness (MD: 139.39 Nm/degree; 95% CI 0.79–277.98) when compared to the cross screw construct. Lastly, the nonlocking plate, locking T plate, and cross-pin constructs were found to be inferior in most respects to alternative interventions. The NMA indicated that fixed angle devices (blade plate and anatomic locking plate) and screw fixations may exhibit enhanced biomechanical strength in axial and bending directions, whereas cross screws demonstrated reduced torsional stability in comparison to parallel screws. It is imperative for clinicians to consider the application of these findings in constraining forces across various directions during early range of motion exercises, taking into account the distinct biomechanical properties of the respective implants.

multidisciplinary sciences
New Innovation: Custom Titanium Zygomaticomaxillary Complex (ZMC) Plate for Facial Reconstruction

Sara Eliseo,Ahmed Mansour,Marshall G Miles

DOI: https://doi.org/10.7759/cureus.59379

2024-04-30

Cureus

Abstract:Zygomaticomaxillary complex (ZMC) fractures typically result from traumatic injuries, such as motor vehicle-related incidents, assaults, falls, and sports-related injuries. These fractures characteristically occur along suture lines where the zygomatic bone borders the frontal bone, maxilla, temporal bone, and sphenoid bone, resulting in a "tetrapod" fracture pattern that can be surgically fixated utilizing one, two, and three-point plate and screw fixation. However, fractures with complete loss of bone stock are less common, and standardized methods of fixation are not suitable for such complex fractures. Here, we present an interesting case of implantation of a custom-made alloplastic implant in a patient with complex ZMC fractures with loss of bone stock. A 52-year-old male sustained a traumatic gunshot wound to the face, resulting in significant destruction of bones involving the left orbital floor, left lateral orbital wall, and left zygomatic arch. Routine plating was not feasible, so a custom spanning plating system by DePuy Synthes (Synthes USA Products, LLC, West Chester, PA) was designed using the patient's CT scans. The patient recovered well with no complications. This case illustrates the successful application of patient-specific custom plates for complex ZMC fractures when standard plating methods are not suitable.

A Fractal Watermark Solution for Product Data

Topiramate Titration to Response: Analysis of Individualized Therapy Study (TRAITS)

Osteosynthesis of Phalangeal Fractures: Biomechanical Comparison of Kirschner Wires, Plates, and Compression Screws

Giant leap for p53, small step for drug design.

Feasibility of 2-Point Fixation by Absorbable Plates Using the Transoral Approach in Management of the Zygomatic Complex Fractures

Evaluation of labial versus labio-inferior lines of osteosynthesis using 3D miniplate for fractures of anterior mandible: A finite element analysis with a pilot clinical trial

Locking Plates With Computationally Enhanced Screw Trajectories Provide Superior Biomechanical Fixation Stability of Complex Proximal Humerus Fractures

Low-profile double plating versus dorsal LCP in stabilization of the olecranon fractures

Biomechanical comparison of plate materials and designs for subcondylar fracture fixation: An assessment

Usability testing of a novel interlocking three-dimensional miniplate for mandibular angle fractures

Modeling stability post zygomatic fracture reconstruction

Dorsal Plating, Lateral Plating, and Intramedullary Screw Fixation of Extra-Articular Proximal Phalangeal Fractures: A Cadaveric Biomechanical Comparison

Complex humeral head fractures treated with blocked threaded wires: maintenance of the reduction and clinical results with two different fixation constructs

Randomized Controlled Clinical Trial on Internal Fixation for Fracture of Mandible with Super-High Molecular Weight PDLLA Plates and Screws

Biomechanical comparison of three fixation strategies for radial head fractures: a biomechanical study

Experimental validation of finite element simulation of a new custom-designed fixation plate to treat mandibular angle fracture

Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair

Plate osteosynthesis combined with bone cement provides the highest stability for tibial head depression fractures under high loading conditions

Application of Biodegradable Plates for Treating Pediatric Mandibular Fractures.

Is implant choice associated with fixation strength for displaced radial neck fracture: a network meta-analysis of biomechanical studies

New Innovation: Custom Titanium Zygomaticomaxillary Complex (ZMC) Plate for Facial Reconstruction