Digital Twin Assisted Beamforming Design for Integrated Sensing and Communication Systems

Shuaifeng Jiang,Ahmed Alkhateeb
2024-12-10
Abstract:This paper explores a novel research direction where a digital twin is leveraged to assist the beamforming design for an integrated sensing and communication (ISAC) system. In this setup, a base station designs joint communication and sensing beamforming to serve the communication user and detect the sensing target concurrently. Utilizing the electromagnetic (EM) 3D model of the environment and ray tracing, the digital twin can provide various information, e.g., propagation path parameters and wireless channels, to aid communication and sensing systems. More specifically, our digital twin-based beamforming design first leverages the environment EM 3D model and ray tracing to (i) predict the directions of the line-of-sight (LoS) and non-line-of-sight (NLoS) sensing channel paths and (ii) identify the dominant one among these sensing channel paths. Then, to optimize the joint sensing and communication beam, we maximize the sensing signal-to-noise ratio (SNR) on the dominant sensing channel component while satisfying a minimum communication signal-to-interference-plus-noise ratio (SINR) requirement. Simulation results show that the proposed digital twin-assisted beamforming design achieves near-optimal target sensing SNR in both LoS and NLoS dominant areas, while ensuring the required SINR for the communication user. This highlights the potential of leveraging digital twins to assist ISAC systems.
Signal Processing,Information Theory
What problem does this paper attempt to address?
### What problems does this paper attempt to solve? This paper aims to solve how to use Digital Twin technology to assist in the beamforming design of the Integrated Sensing and Communication (ISAC) system. Specifically, the paper explores the following issues: 1. **Resource Allocation Challenges**: In the ISAC system, performing communication and sensing tasks simultaneously requires efficient resource allocation. Traditional methods usually assume that the sensing target is on the Line - of - Sight (LoS) path or the wireless sensing channel information is known, which limits the flexibility and applicability of the system. 2. **Non - Line - of - Sight Path Sensing**: Traditional ISAC systems have difficulty detecting targets on Non - Line - of - Sight (NLoS) paths because the information of these paths is difficult to obtain and complex. 3. **Difficulty in Obtaining Channel Information**: Obtaining sensing channel information is challenging, especially when the sensing target cannot cooperate in pilot - based channel estimation, or when the sensing channel is affected by the unknown shape and material of the target. To solve these problems, the author proposes a new research direction, that is, using Digital Twin technology to assist in beamforming design. By constructing a three - dimensional electromagnetic (EM) model of the environment and applying ray tracing, Digital Twin can predict the direction of the propagation path and part of the channel gain, thereby guiding the beamforming design. This method not only improves the sensing performance but also ensures the minimum SINR requirement of the communication link. ### Specific Contributions 1. **Introduction of Digital Twin Assistance**: A method of using Digital Twin to infer wireless sensing channel information and thus assist in the operation of the ISAC system is proposed. 2. **Optimization of NLoS Sensing Performance**: A joint communication and sensing beamforming design is developed, which uses the dominant NLoS directions predicted by Digital Twin to achieve high sensing performance. 3. **Adaptation to Multiple Scenarios**: A joint communication and sensing beamforming design is proposed, which can adapt to LoS and NLoS sensing directions, improving the universality and robustness of the system. ### Result Verification The simulation results show that the proposed Digital Twin - assisted ISAC beamforming method can achieve near - optimal target - sensing SNR in LoS and NLoS - dominant regions while meeting the SINR requirements of communication users. This indicates that Digital Twin technology has great potential in assisting ISAC systems. ### Summary By introducing Digital Twin technology, this paper solves key problems such as resource allocation, non - line - of - sight path sensing, and channel information acquisition in the ISAC system, demonstrating its effectiveness in improving sensing performance and communication quality.