Abstract:Integrated sensing and communication (ISAC) is recognized as one of key enabling technologies for the Meta-verse. To enhance both communication data rate and sensing accuracy, the exploitation of millimeter wave (mmWave) and terahertz (THz) frequencies becomes mandatory due to huge amount of spectrum resources. To combat the severe path-loss at mmWave/THz band, large-scale antenna arrays are usually employed to form directional beams. However, the ultra-broad bandwidth induces undesirable beam squint (BS) effects, where the beams from different subcarriers point to diverse angles, leading to the communication performance loss. Fortunately, this BS effect can be leveraged to facilitate the multi-angle super-resolution sensing with minimal beam sweeping overhead. Against this background, we propose a novel multicarrier waveform design methodology for the BS-assisted ISAC systems, which optimizes the frequency resource allocation between sensing and communications to reach a good dual-functional performance trade-off. To mitigate mutual interference, both functions are assigned non-overlapping subcarriers. The subcarrier assignment design is formulated as a mixed integer programming problem to maximize the communication throughput while ensuring the required sensing range and resolution, which involves high complexity to get an exact solution. To this end, we propose a two-stage iterative update algorithm to obtain a quasi-optimal solution with low computational complexity. Numerical results demonstrate that our proposed methodology achieves high-rate communication and high-resolution sensing simultaneously with relatively low overhead.

DL-based Joint Waveform and Beamforming Design for Integrated Sensing and Communication.

Deep Learning-based Design of Uplink Integrated Sensing and Communication

Joint Design of Transmit Waveform and Passive Beamforming for RIS-assisted ISAC System

Integrated Sensing and Communication with Millimeter Wave Full Duplex Hybrid Beamforming

A Dual-Functional Sensing-Communication Waveform Design Based on OFDM

Integrated Sensing and Communication Beamforming Design Based on Mutual Information

Joint Transmit and Receive Beamforming Design in Full-Duplex Integrated Sensing and Communications

Waveform Design for Communication-Assisted Sensing in 6G Perceptive Networks

Networked Integrated Sensing and Communications for 6G Wireless Systems

Energy-efficient Integrated Sensing and Communication System and DNLFM Waveform

Joint BS Selection, User Association, and Beamforming Design for Network Integrated Sensing and Communication

Cross-Domain Multicarrier Waveform Design for Integrated Sensing and Communication

Multicarrier Waveform Design for mmWave/THz Integrated Sensing and Communication

Robust Beamforming Design for UAV Communications Based on Integrated Sensing and Communication

Sensing-based Beamforming Design for Joint Performance Enhancement of RIS-Aided ISAC Systems

Joint Beamforming and Power Control for D2D-Assisted Integrated Sensing and Communication Networks

Joint Beamforming for RIS Aided Full-Duplex Integrated Sensing and Uplink Communication

Joint Beamforming for Multi-target Detection and Multi-user Communication in ISAC Systems

Hybrid Beamforming Design for RSMA-assisted mmWave Integrated Sensing and Communications

Sensing Integrated DFT-Spread OFDM Waveform and Deep Learning-Powered Receiver Design for Terahertz Integrated Sensing and Communication Systems