Near-Field Measurement System for the Upper Mid-Band

Ali Rasteh,Raghavendra Palayam Hari,Hao Guo,Marco Mezzavilla,Sundeep Rangan

2024-12-04

Abstract:The upper mid-band (or FR3, spanning 6-24 GHz) is a crucial frequency range for next-generation mobile networks, offering a favorable balance between coverage and spectrum efficiency. From another perspective, the systems operating in the near-field in both indoor environment and outdoor environments can support line-of-sight multiple input multiple output (MIMO) communications and be beneficial from the FR3 bands. In this paper, a novel method is proposed to measure the near-field parameters leveraging a recently developed reflection model where the near-field paths can be described by their image points. We show that these image points can be accurately estimated via triangulation from multiple measurements with a small number of antennas in each measurement, thus affording a low-cost procedure for near-field multi-path parameter extraction. A preliminary experimental apparatus is presented comprising 2 transmit and 2 receive antennas mounted on a linear track to measure the 2x2 MIMO channel at various displacements. The system uses a recently-developed wideband radio frequency (RF) transceiver board with fast frequency switching, an FPGA for fast baseband processing, and a new parameter extraction method to recover paths and spherical characteristics from the multiple 2x2 measurements.

Signal Processing

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to accurately extract multipath parameters when conducting near - field channel measurements in the upper - middle frequency band (FR3) of 6 - 24 GHz. Specifically, the existing methods for channel measurement in the near - field environment face the following challenges:

1. **Lack of near - field parameters**:
- Traditional channel models (such as those used by 3GPP) usually describe path parameters through angles, phases, and gains. These parameters are suitable for extrapolating far - field MIMO matrices, but they cannot accurately describe the spherical characteristics of propagation in the near - field environment.

2. **Requirement for high - dimensional antenna arrays**:
- In order to estimate channels over a wide aperture and capture spherical wavefronts, the most straightforward method is to use a high - dimensional antenna array with a large number of elements, but such an experimental system is costly.

3. **Multipath problem**:
- Many near - field systems focus on line - of - sight (LOS) settings. However, in practical applications, channels usually contain LOS and non - line - of - sight (NLOS) components. Therefore, it is necessary to obtain the spherical characteristics of each path.

To solve these problems, this paper proposes a new channel estimation method based on the following key contributions:

- **Reflection model for near - field propagation**:
- The recently developed reflection model (RM) is extended to describe multipath channels, where some paths may be in the near - field. The reflection model provides a simple geometric interpretation and can be applied to NLOS scenarios.

- **Constructing synthetic apertures from pairwise non - coherent measurements**:
- A method for conducting near - field channel measurements using only two transmit (TX) and two receive (RX) antennas is proposed. Synthetic apertures are constructed by mechanically moving antenna array elements and making measurements at multiple positions. Importantly, these measurements can be non - coherent, allowing for significant time intervals between different measurements without the need for long - term phase coherence.

- **Preliminary experimental demonstration**:
- A preliminary experimental demonstration was carried out using a 2×2 software - defined radio (SDR) developed by Pi - Radio, which is installed on a straight track to achieve a synthetic aperture.

Through these methods, the paper aims to provide a low - cost and efficient near - field multipath parameter extraction scheme, thereby improving the channel modeling and performance of communication systems in the upper - middle frequency band (6 - 24 GHz).