Abstract:BackgroundMyoelectric pattern recognition systems can decode movement intention to drive upper-limb prostheses. Despite recent advances in academic research, the commercial adoption of such systems remains low. This limitation is mainly due to the lack of classification robustness and a simultaneous requirement for a large number of electromyogram (EMG) electrodes. We propose to address these two issues by using a multi-modal approach which combines surface electromyography (sEMG) with inertial measurements (IMs) and an appropriate training data collection paradigm. We demonstrate that this can significantly improve classification performance as compared to conventional techniques exclusively based on sEMG signals.MethodsWe collected and analyzed a large dataset comprising recordings with 20 able-bodied and two amputee participants executing 40 movements. Additionally, we conducted a novel real-time prosthetic hand control experiment with 11 able-bodied subjects and an amputee by using a state-of-the-art commercial prosthetic hand. A systematic performance comparison was carried out to investigate the potential benefit of incorporating IMs in prosthetic hand control.ResultsThe inclusion of IM data improved performance significantly, by increasing classification accuracy (CA) in the offline analysis and improving completion rates (CRs) in the real-time experiment. Our findings were consistent across able-bodied and amputee subjects. Integrating the sEMG electrodes and IM sensors within a single sensor package enabled us to achieve high-level performance by using on average 4-6 sensors.ConclusionsThe results from our experiments suggest that IMs can form an excellent complimentary source signal for upper-limb myoelectric prostheses. We trust that multi-modal control solutions have the potential of improving the usability of upper-extremity prostheses in real-life applications.

Adapting proportional myoelectric-controlled interfaces for prosthetic hands

Improving the Robustness of Human-Machine Interactive Control for Myoelectric Prosthetic Hand During Arm Position Changing

EMG controlled adaptive multi-grasp prosthetic hand with an android interface

Shared human–robot proportional control of a dexterous myoelectric prosthesis

Dexterous Manipulation Control of a Bionic Prosthesis in Cooperation with Human Upper Limbs

Real-time simultaneous and proportional myoelectric control using intramuscular EMG

Biomimetic Tactile Data Driven Closed-loop Control of Myoelectric Prosthetic Hand-.

A Bio-Mechanical Designed Prosthetic Hand With Multi-Control Strategies

Enhancing Force Control of Prosthetic Controller for Hand Prosthesis by Mimicking Biological Properties

Design and Myoelectric Control of an Anthropomorphic Prosthetic Hand

Online Adaptation for Myographic Control of Natural Dexterous Hand and Finger Movements

Improved prosthetic hand control with concurrent use of myoelectric and inertial measurements

Control of myoelectric prosthetic hand with a novel proximity-tactile sensor

Experimental Study of an Emg-Controlled 5-Dof Anthropomorphic Prosthetic Hand for Motion Restoration

Effect of user adaptation on prosthetic finger control with an intuitive myoelectric decoder

Effect of User Practice on Prosthetic Finger Control With an Intuitive Myoelectric Decoder

Surface Emg For Multi-Pattern Recognition With Sensory Feedback Controller Of Hand Prosthesis System

Design of a Biomimetic Control System for Tendon-driven Prosthetic Hand

Multichannel electrotactile feedback for simultaneous and proportional myoelectric control

Design and Functional Evaluation of a Dexterous Myoelectric Hand Prosthesis with Biomimetic Tactile Sensor

Development of a Low-Cost Prosthetic Hand Using Electromyography and Machine Learning