Abstract:The surface-electrode ion trap is one of the key devices in modern ion-trapping apparatus to host the ion qubits for quantum computing. Surface traps fabricated on the silicon substrate have the versatility for complex electrode fabrication with 3-D integration capability. However, Si-induced dielectric loss has to be considered in trap design, and a ground structure is being incorporated to mitigate this concern. In this article, surface-electrode ion trap is fabricated using the standard Cu back-end process on a 300-mm Si wafer platform. Several process novelties are demonstrated: 1) the use of electroplated Cu/Au layers using microfabrication techniques to form the surface electrodes; 2) the use of dry etching to form the fine-gap oxide trench between the electrodes for reducing the charge-induced stray electric field; 3) the use of Cu mesh ground structure to enhance the resonance performance of the trap; and 4) process optimization to minimize the undercut in Cu/Au electrodes. Promising electrical properties are obtained from the fabricated ion trap with a leakage current failure rate of < 10% on a 300-mm wafer. Two trap types designed with radio-frequency (RF) linewidth of 80 and $40~\mu \text{m}$ are evaluated for their resonance performance with and without the ground plane. By incorporating ground plane into the ion trap, the resonance performances are significantly improved with an output power increment of 11 and 13 dB and $Q$ factor increment of 2 and 6 for the corresponding trap types.

A silicon-based ion trap chip protected from semiconductor charging

Photo-induced charge carrier dynamics in a semiconductor-based ion trap investigated via motion-sensitive qubit transitions

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

3D Integration of CMOS-Compatible Surface Electrode Ion Trap and Silicon Photonics for Scalable Quantum Computing

Fabrication and Characterization of Surface Electrode Ion Trap for Quantum Computing

Monolithic Microfabricated Symmetric Ion Trap for Quantum Information Processing

Heterogenous Integration of Silicon Ion Trap and Glass Interposer for Scalable Quantum Computing Enabled by TSV, Micro-bumps and RDL

Charge-based silicon quantum computer architectures using controlled single-ion implantation

Cryogenic silicon surface ion trap

Engineering of Microfabricated Ion Traps and Integration of Advanced On-Chip Features

RF Performance Benchmarking of TSV Integrated Surface Electrode Ion Trap for Quantum Computing

Multi-junction surface ion trap for quantum computing

Chip-integrated voltage sources for control of trapped ions

TSV-integrated Surface Electrode Ion Trap for Scalable Quantum Information Processing

Single-electron operation of a silicon-CMOS 2x2 quantum dot array with integrated charge sensing

Surface-Electrode Ion Trap with Ground Structures for Minimizing the Dielectric Loss in the Si Substrate

Silicon Nano-Crystals Based Mos Memory and Effects of Traps on Charge Storage Characteristics

Design Considerations and Fabrication Challenges of Surface Electrode Ion Trap with TSV Integration

Robustness of electron charge shuttling: Architectures, pulses, charge defects and noise thresholds

Penning micro-trap for quantum computing

3D-Printed Micro Ion Trap Technology for Scalable Quantum Information Processing