How vortices enhance heat transfer from an oscillating plate

Xiaojia Wang,Silas Alben

2024-11-09

Abstract:Oscillations of a heated solid surface in an oncoming fluid flow can increase heat transfer from the solid to the fluid. Previous studies have investigated the resulting heat transfer enhancement for the case of a circular cylinder undergoing translational or rotational motions. Another common geometry, the flat plate, has not been studied as thoroughly. The flat plate sheds larger and stronger vortices that are sensitive to the plate's direction of oscillation. To study the effect of these vortices on heat transfer enhancement, we compute the heat transfer from a flat plate with different orientations and oscillation directions in an oncoming flow with Reynolds number 100. We consider plates with fixed temperature and fixed heat flux, and find large heat transfer enhancement in both cases. We investigate the effects of the plate orientation angle and the plate oscillation direction, velocity, amplitude, and frequency, and find that the plate oscillation velocity and direction have the strongest effects on global heat transfer. The other parameters mainly affect the local heat transfer distributions through shed vorticity distributions. We also discuss the input power needed for the oscillating plate system and the resulting Pareto optimal cases.

Fluid Dynamics

What problem does this paper attempt to address?

### Problems the paper attempts to solve

This paper aims to study the heat transfer enhancement mechanism of an oscillating flat plate in an incoming flow. Specifically, the author focuses on the influence of oscillation on the heat transfer of the flat plate at different directions and frequencies. Different from previous studies which mainly focused on the oscillating motion of cylinders, this paper concentrates on the flat - plate geometry. During the oscillation process, the flat plate will generate large vortices, which have a significant impact on heat transfer. Therefore, through the numerical simulation method, this paper explores the influence of different oscillation directions, velocities, amplitudes and frequencies on heat transfer, and analyzes how these parameters affect global and local heat transfer through vortex patterns.

### Main research contents

1. **Research background**:
- Oscillating a heated solid surface can increase the heat transfer from the solid to the fluid.
- Previous studies mainly focused on the translational or rotational motion of cylinders, while there were fewer studies on flat plates.
- During the oscillation process, the flat plate will generate larger and stronger vortices, which have an important impact on heat transfer.

2. **Research methods**:
- Use the numerical simulation method to calculate the heat transfer of the flat plate at different oscillation directions and frequencies.
- Consider two boundary conditions: fixed temperature and fixed heat flux.
- Analyze the influence of different parameters (such as oscillation direction, velocity, amplitude and frequency) on global and local heat transfer.

3. **Main findings**:
- The oscillation velocity and direction have the strongest influence on global heat transfer.
- When the oscillation direction changes from in - plane to transverse, the heat transfer usually improves.
- The incoming flow direction and oscillation frequency have an obvious but weaker influence on global heat transfer.
- Different parameters mainly affect local heat transfer through vortex distribution.

4. **Application prospects**:
- The research results are of great significance for the thermoregulation mechanism in the biological field, such as the swinging of elephant ears and the blood flow regulation in bat wings.
- It also has application value for the cooling of plant leaves during wind - induced oscillations.
- It provides a theoretical basis for designing efficient heat transfer systems.

### Mathematical models and formulas

1. **Flat - plate oscillation velocity**:
\[
(U_b, V_b)=\left(\frac{U_b^* f^* \ell^*}{f^* \ell^*}, \frac{V_b^* f^* \ell^*}{f^* \ell^*}\right)=2\pi A\sin(2\pi t)e^{-(t / t_0)^2}(\cos(\alpha), \sin(\alpha))
\]
where \(A\) is the oscillation amplitude, \(\alpha\) is the oscillation direction angle, and \(t_0 = 0.2\).

2. **Control equations**:
- **Navier - Stokes equations**:
\[
\frac{\partial u}{\partial t}+u\cdot\nabla u =-\nabla p+\frac{1}{Re_f}\nabla^2 u-\frac{dU_b}{dt}
\]
\[
\nabla\cdot u = 0
\]
- **Energy equation**:
\[
\frac{\partial T}{\partial t}+u\cdot\nabla T=\frac{1}{Re_f Pr}\nabla^2 T
\]

3. **Nusselt number**:
\[
Nu=\frac{\partial T / \partial y}{T_{\text{plate}}-T_{\infty}}
\]
- Local Nusselt number:
\[
Nu_{\text{top}}(x, t)=-\frac{\partial T}{\partial y}\bigg|_{y = 0^+}, \quad Nu_{\text{bottom}}(x, t)=-\frac{\partial T}{\partial y}\bigg|_{y = 0^-}
\]