Pinching rigidity of minimal surfaces in spheres

Weiran Ding,Jianquan Ge,Fagui Li

DOI: https://doi.org/10.1007/s11425-024-2355-1

2024-11-06

Abstract:In this paper we give a pinching theorem of the Simon conjecture in the case s=3 and also give a new proof of the cases s=1 and s=2 by some Simons-type integral inequalities.

Differential Geometry

What problem does this paper attempt to address?

Curvature Pinching for Three-Dimensional Minimal Submanifolds in a Sphere

YB SHEN

DOI: https://doi.org/10.2307/2159229

IF: 0.9709

1992-01-01

Proceedings of the American Mathematical Society

Abstract:In this paper, some pinching theorems for the Ricci curvature and the scalar curvature of three-dimensional compact minimal submanifolds in a sphere are given.
On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

YB SHEN

DOI: https://doi.org/10.1360/ya1989-32-7-769

1989-01-01

Abstract:In this paper, some intrinsic rigidity theorems are given for compact minimal submanifolds in a sphere. In particular, the pinching constant of J. Simons is improved for higher codimensions.
A global pinching theorem for compact surfaces in S3 with constant mean curvature

Hu Zejun,Li Haizhong

1996-01-01

Acta Mathematica Sinica

Abstract:Let M be a compact minimal surface in S3. Y. J. Hsu[5] proved that if ��S��2 �� 2��2��, then M is either the equatorial sphere or the Clifford torus, where S is the square of the length of the second fundamental form of M, �� 2 denotes the L2-norm on M. In this paper, we generalize Hsu's result to any compact surfaces in S3 with constant mean curvature.
Rigidity theorem for Willmore surfaces in a sphere

HONGWEI XU,DENGYUN YANG

DOI: https://doi.org/10.1007/s12044-016-0270-y

2016-01-01

Proceedings - Mathematical Sciences

Abstract:Let M 2 be a compact Willmore surface in the (2 + p )-dimensional unit sphere S 2 + p . Denote by H and S the mean curvature and the squared length of the second fundamental form of M 2 , respectively. Set ρ 2 = S −2 H 2 . In this note, we proved that there exists a universal positive constant C , such that if ∥ ρ 2 ∥ 2 < C , then ρ 2 =0 and M 2 is a totally umbilical sphere.
A Global Pinching Theorem for Compact Surfaces in S 3 with Constant Mean Curvature

Hu Zejun,Li Haizhong

DOI: https://doi.org/10.1007/bf02108153

1996-01-01

Acta Mathematica Sinica English Series

Abstract:LetM be a compact minimal surface inS3. Y. J. Hsu[5] proved that if ∥S∥2≤2√2π, thenM is either the equatorial sphere or the Clifford torus, whereS is the square of the length of the second fundamental form ofM, ∥·∥2 denotes theL2-norm onM. In this paper, we generalize Hsu's result to any compact surfaces inS3 with constant mean curvature.
Global Pinching Theorems for Minimal Submanifolds in a Complex Projective Space

Dong Pu,Hongwei Xu

DOI: https://doi.org/10.4310/ajm.2021.v25.n2.a6

2021-01-01

Asian Journal of Mathematics

Abstract:In this paper, we investigate the compact minimal submanifold M-n(n >= 3) in the complex projective space CPn+p/2 (1). Denote by S the square norm of the second fundamental form. Set, (S) over tilde = S + 1/2 vertical bar t vertical bar(2) and epsilon = inf(M)vertical bar P vertical bar(2) , where P, t are the tensors defined in (2.1) below. We first, prove such that if parallel to S parallel to(n/2) < alpha 1 (n, epsilon) for epsilon > 0, then M is a totally geodesic submanifold CPn/2. Moreover, we prove if parallel to(S) over tilde parallel to(n/2) < alpha 3(n), where alpha 3(n) is an explicit positive constant depending only on n, then M is a totally geodesic submanifold CPn/2. We also prove other global pinching theorems for minimal submanifolds in the complex projective space.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
The Riemannian Geometry of Superminimal Surfaces in Complex Space Forms

Shen Yibing

DOI: https://doi.org/10.1007/bf02106984

1996-01-01

Acta Mathematica Sinica English Series

Abstract:This paper deals with superminimal surfaces in complex space forms by using theFrenet framing. We formulate explicitly the length squares of the higher fundamental forms andthe higher curvatures for superminimal surfaces in terms of the metric of the surface and the Khlerangle of the immersion. Particularly, some curvature pinching theorems for minimal 2-spheres in acomplex projective space are given and a new characterization of the Veronese sequence is obtained.
Ricci curvature, minimal surfaces and sphere theorems

Ying Shen,Shunhui Zhu

DOI: https://doi.org/10.48550/arXiv.dg-ga/9709002

1997-08-30

Abstract:Using an analogue of Myers' theorem for minimal surfaces and three dimensional topology, we prove the diameter sphere theorem for Ricci curvature in dimension three and a corresponding eigenvalue pinching theorem. This settles these two open problems for closed 3 manifolds with positive Ricci curvature since they are both false in dimensions greater than three.

Differential Geometry
On Chernʼs Problem for Rigidity of Minimal Hypersurfaces in the Spheres

Qi Ding,Y. L. Xin

DOI: https://doi.org/10.1016/j.aim.2011.01.018

IF: 1.675

2011-01-01

Advances in Mathematics

Abstract:For a compact minimal hypersurface M in Sn+1 with the squared length of the second fundamental form S we confirm that there exists a positive constant δ(n) depending only on n, such that if n⩽S⩽n+δ(n), then S≡n, i.e., M is a Clifford minimal hypersurface, in particular, when n⩾6, the pinching constant δ(n)=n23.
Some Pinching Theorems for Minimal Submanifolds in $$ \mathbb{s}^m (1) \times \mathbb{r} $$

Hang Chen,GangYi Chen,HaiZhong Li

DOI: https://doi.org/10.1007/s11425-012-4556-y

2013-01-01

Science China Mathematics

Abstract:Let M n be an n-dimensional compact minimal submanifolds in $\mathbb{S}^m (1) \times \mathbb{R}$. We prove two pinching theorems by the Ricci curvature and the sectional curvature pinching conditions respectively. In fact, we characterize the Clifford tori and Veronese submanifolds by our pinching conditions respectively.
Some pinching theorems for minimal submanifolds in 𝕊^m (1) ×ℝ

Hang Chen,GangYi Chen,HaiZhong Li

DOI: https://doi.org/10.1007/s11425-012-4556-y

2012-01-01

Abstract:Let M n be an n -dimensional compact minimal submanifolds in 𝕊^m (1) ×ℝ . We prove two pinching theorems by the Ricci curvature and the sectional curvature pinching conditions respectively. In fact, we characterize the Clifford tori and Veronese submanifolds by our pinching conditions respectively.
On Closed Minimal Submanifolds in Pinched Riemannian Manifolds

HW XU

DOI: https://doi.org/10.2307/2154969

IF: 1.3529

1995-01-01

Transactions of the American Mathematical Society

Abstract:In this paper, we first prove a generalized Simons integral inequality for closed minimal submanifolds in a Riemannian manifold. Second, we prove a pinching theorem for closed minimal submanifolds in a complete simply connected pinched Riemannian manifold, which generalizes the results obtained by S. S. Chern, M. do Carmo, and S. Kobayashi and A. M. Li and J. M. Li respectively. Finally, we obtain a distribution theorem for the square norm of the second fundamental form of M under the assumption that M is a minimal submanifold with parallel second fundamental form in a Riemannian manifold.
Ju l 2 01 5 An intrinsic rigidity theorem for closed minimal hypersurfaces in S 5 with constant nonnegative scalar curvature

Bing Tang,Ling Yang

2018-01-01

Abstract:Let M be a closed minimal hypersurface in S with constant nonnegative scalar curvature. Denote by f3 the sum of the cubes of all principal curvatures, by g the number of distinct principal curvatures. We prove that, if both f3 and g are constant, then M is isoparametric. Moreover, We give all possible values for squared length of the second fundamental form of M. This result provides another piece of supporting evidence to the Chern conjecture.
Contracting Pinched Hypersurfaces in Spheres by Their Mean Curvature

Yan Li,Hongwei Xu,Entao Zhao

DOI: https://doi.org/10.4310/pamq.2015.v11.n2.a8

2015-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we study an open problem proposed in [10]. We prove that the mean curvature flow of hypersurfaces in the sphere will contract to a round point in finite time if the initial hypersurface satisfies a curvature pinching condition. Our theorem is a partial improvement of the convergence theorem due to Huisken [7].
Existence of four minimal spheres in $S^3$ with a bumpy metric

Zhichao Wang,Xin Zhou

2024-06-17

Abstract:We prove that in the three dimensional sphere with a bumpy metric or a metric with positive Ricci curvature, there exist at least four distinct embedded minimal two-spheres. This confirms a conjecture of S. T. Yau in 1982 for bumpy metrics and metrics with positive Ricci curvature. The proof relies on a multiplicity one theorem for the Simon-Smith min-max theory.

Differential Geometry,Analysis of PDEs,Geometric Topology
On Yau Rigidity Theorem for Minimal Submanifolds in Spheres

Juan-Ru Gu,Hong-Wei Xu

DOI: https://doi.org/10.4310/mrl.2012.v19.n3.a1

2012-01-01

Mathematical Research Letters

Abstract:In this note, we investigate the well-known Yau rigidity theorem for minimal submanifolds in spheres. Using the parameter method of Yau and the DDVV inequality verified by Lu, Ge and Tang, we prove that if $M$ is an $n$-dimensional oriented compact minimal submanifold in the unit sphere $S^{n+p}(1)$, and if $K_{M}\geq\frac{sgn(p-1)p}{2(p+1)},$ then $M$ is either a totally geodesic sphere, the standard immersion of the product of two spheres, or the Veronese surface in $S^4(1)$. Here $sgn(\cdot)$ is the standard sign function. We also extend the rigidity theorem above to the case where $M$ is a compact submanifold with parallel mean curvature in a space form.
Existence of embedded minimal tori in three-spheres with positive Ricci curvature

Xingzhe Li,Zhichao Wang

2024-09-16

Abstract:In this paper, we prove the strong Morse inequalities for the area functional in the space of embedded tori and spheres in the three sphere. As a consequence, we prove that in the three dimensional sphere with positive Ricci curvature, there exist at least 4 distinct embedded minimal tori. Suppose in addition that the metric is bumpy, then the three-sphere contains at least 9 distinct embedded minimal tori. The proof relies on a multiplicity one theorem for the Simon-Smith min-max theory proved by the second author and X. Zhou.

Differential Geometry
Pinching Theorems of Hypersurfaces in a Unit Sphere

Yun Tao Zhang

DOI: https://doi.org/10.1016/j.difgeo.2011.09.001

IF: 0.536

2011-01-01

Differential Geometry and its Applications

Abstract:Let Mn be a complete hypersurface in Sn+1(1) with constant mean curvature. Assume that Mn has n−1 principal curvatures with the same sign everywhere. We prove that if RicM≤C−(H), either S⩽S+(H) or RicM⩾0 or the fundamental group of Mn is infinite, then S is constant, S=S+(H) and Mn is isometric to a Clifford torus S1(1−r2)×Sn−1(r) with r2⩾n−1n. These rigidity theorems are still valid for compact hypersurface without constancy condition on the mean curvature.

Pinching rigidity of minimal surfaces in spheres

Curvature Pinching for Three-Dimensional Minimal Submanifolds in a Sphere

On Intrinsic Rigidity for Minimal Submanifolds in A Sphere

A global pinching theorem for compact surfaces in S3 with constant mean curvature

Rigidity theorem for Willmore surfaces in a sphere

A Global Pinching Theorem for Compact Surfaces in S 3 with Constant Mean Curvature

Global Pinching Theorems for Minimal Submanifolds in a Complex Projective Space

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

The Riemannian Geometry of Superminimal Surfaces in Complex Space Forms

Ricci curvature, minimal surfaces and sphere theorems

On Chernʼs Problem for Rigidity of Minimal Hypersurfaces in the Spheres

Some Pinching Theorems for Minimal Submanifolds in $$ \mathbb{s}^m (1) \times \mathbb{r} $$

Some pinching theorems for minimal submanifolds in 𝕊^m (1) ×ℝ

On Closed Minimal Submanifolds in Pinched Riemannian Manifolds

Ju l 2 01 5 An intrinsic rigidity theorem for closed minimal hypersurfaces in S 5 with constant nonnegative scalar curvature

Contracting Pinched Hypersurfaces in Spheres by Their Mean Curvature

Existence of four minimal spheres in $S^3$ with a bumpy metric

On Yau Rigidity Theorem for Minimal Submanifolds in Spheres

Existence of embedded minimal tori in three-spheres with positive Ricci curvature

Pinching Theorems of Hypersurfaces in a Unit Sphere