Abstract:The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN aims to achieve unprecedented levels of instantaneous and integrated luminosities, approximately 5 × 10 34 cm -2 s -1 and 3000 fb -1 , respectively. It is anticipated that each bunch-crossing will result in an average of 140 to 200 collisions (pileup). The lead tungstate crystals and avalanche photodiodes (APDs) in the barrel region of the electromagnetic calorimeter (ECAL) of the Compact Muon Solenoid (CMS) will remain effective. However the readout and trigger electronics will undergo complete replacement to keep the current level of performance. A dual gain trans-impedance amplifier and an application-specific integrated circuit will be installed, providing two 160 MS/s analog-to-digital converter channels, gain selection, and data compression. The increase in noise within the APDs, due to radiation-induced dark current, will be alleviated by reducing the operating temperature of the ECAL. Additionally, the trigger primitive formation will be shifted away from the detector and handled by powerful and flexible field-programmable gate array processors housed on the back-end electronics cards. In this document, the complete ECAL barrel readout chain design and the current state of research and development for each individual component regarding the upgrade will be described. The outcomes of recent test beam campaigns conducted at the CERN SPS, exploiting electron beams with energies of up to 250 GeV, will also be summarized. Notably, measurements pertaining to the energy resolution performance of the latest prototypes of HL-LHC ECAL readout electronics will be presented.

Functional Verification for Endcap Concentrator ASICs in the High-Granularity Calorimeter Upgrade of CMS

First test results of the HGCAL concentrator ASICs: ECON-T and ECON-D

CMS HGCAL electronics vertical integration system tests

The CMS High-Granularity Calorimeter for Operation at the High-Luminosity LHC

The Silicon Sensors for the High Granularity Calorimeter of CMS

Reusable Verification Components for High-Energy Physics readout ASICs

The upgrade of the CMS electromagnetic calorimeter for HL-LHC

On-beam system test of the new readout electronics for the CMS Electromagnetic Calorimeter upgrade

Process Quality Control Strategy for the Phase-2 Upgrade of the CMS Outer Tracker and High Granularity Calorimeter

The CMS HGCAL trigger data receiver

CMS ECAL VFE design, production and testing

Electronics design and testing of the CMS Fast Beam Condition Monitor for HL-LHC

Test and performance of the LiTE-DTU ASIC for the HL-LHC upgrade of the CMS ECAL barrel

Cms Rpc Commissioning of the Existing Detector During the Long Shutdown

Radiation hardness and quality validation of the on-detector electronics for the CMS Drift Tubes upgrade

Cosmic Ray Test Certification of the First 100 Cms Endcap Rpcs and the Corresponding Construction Database

Test and performance of the CMS ECAL barrel data conversion and digital processing ASIC for HL-LHC

Irradiation Tests and Expected Performance of Readout Electronics of the ATLAS Hadronic Endcap Calorimeter for the HL-LHC

Experimental and simulation study of irradiated silicon pad detectors for the CMS High Granularity Calorimeter

Latest results of Longevity studies on the present CMS RPC system for HL-LHC phase