Kilovolt Pyroelectric Voltage Generation and Electrostatic Actuation With Fluidic Heating

Di Ni,Ved Gund,Landon Ivy,Amit Lal

DOI: https://doi.org/10.31438/trf.hh2022.16

2024-11-05

Abstract:Integrated micro power generators are crucial components for micro robotic platforms to demonstrate untethered operation and to achieve autonomy. Current micro robotic electrostatic actuators typically require hundreds to thousands of voltages to output sufficient work. Pyroelectricity is one such source of high voltages that can be scaled to small form factors. This paper demonstrates a distributed pyroelectric high voltage generation mechanism to power kV actuators using alternating exposure of crystals to hot and cold water (300C to 900C water temperature). Using this fluidic temperature control, a pyroelectrically generated voltage of 2470 V was delivered to a 2 pF storage capacitor yielding a 6.10 {\mu}J stored energy. A maximum energy of 17.46 {\mu}J was delivered to a 47 pF capacitor at 861 V. The recirculating water can be used to heat a distributed array of converters to generate electricity in distant robotic actuator sections. The development of this distributed system would enable untethered micro-robot to be operated with a flexible body and free of battery recharging, which advances its applications in the real world.

Robotics,Systems and Control

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to provide an efficient and miniaturized high - voltage generation mechanism for the micro - robot platform to achieve autonomous operation and untethered running. Specifically, the paper focuses on the following aspects:

1. **High - voltage Requirement**: Currently, electrostatic actuators in micro - electro - mechanical systems (MEMS) usually require voltages ranging from hundreds to thousands of volts to output sufficient work. Traditional power supply methods often rely on external power sources, which limit the autonomy and application range of micro - robots.

2. **Challenges of Compact Power Supplies**: Building a compact power supply that can generate sufficient driving voltages while meeting size, weight, and power (SWaP) constraints is a great challenge. Existing methods such as electromagnetic coupling converters, piezoelectric transformers, and switched - capacitor converters each have limitations, such as large volume, low efficiency, or limited voltage gain.

3. **Utilization of Thermal Energy**: The paper proposes a new distributed pyroelectric high - voltage generation mechanism, which generates kilovolt - level voltages by alternately heating and cooling crystals through a fluid medium. This method can not only utilize the widely - existing thermal energy in the environment but also reduce the need for battery charging, thereby further improving the independence and flexibility of micro - robots.

### Specific Problems and Solutions

- **Problem**: How to provide a sufficiently high working voltage for micro - robots without relying on external power sources?
- **Solution**: Utilize the pyroelectric effect to generate high voltages through temperature changes in a tiny space. Specifically, heat is transferred to multiple lithium niobate (LiNbO₃) crystals connected in series through fluid channels, and these crystals can generate significant voltages when the temperature changes. Experimental results show that the system can store voltages as high as 2470 V on a 2 - pF capacitor and achieve an energy storage of 17.46 µJ on a 47 - pF capacitor.

### Key Contributions

- **Distributed Architecture**: Through the distributed layout of multiple pyroelectric units, high voltages can be generated simultaneously at different locations, avoiding energy losses caused by long - distance transmission.
- **Utilization of Environmental Thermal Energy**: Generate electricity by using the thermal energy in the environment, reducing the dependence on external power sources and improving the sustainability and autonomy of the system.
- **Experimental Verification**: Through experiments, it is shown that the system can effectively drive capacitive actuators and reach the expected voltage and energy output levels.

In conclusion, this research provides an innovative and efficient miniaturized high - voltage generation scheme for the micro - robot platform, which is helpful for promoting the development of micro - robot technology in practical applications.