Abstract:In this paper, we introduce our millimeter-wave (mmWave) radio channel measurement for integrated sensing and communication (ISAC) scenarios with distributed links at dual bands in an indoor cavity; we also characterize the channel in delay and azimuth-angular domains for the scenarios with the presence of 1 person with varying locations and facing orientations. In our setting of distributed links with two transmitters and two receivers where each transceiver operates at two bands, we can measure two links whose each transmitter faces to one receiver and thus capable of line-of-sight (LOS) communication; these two links have crossing Fresnel zones. We have another two links capable of capturing the reflectivity from the target presenting in the test area (as well as the background). The numerical results in this paper focus on analyzing the channel with the presence of one person. It is evident that not only the human location, but also the human facing orientation, shall be taken into account when modeling the ISAC channel.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: in the integrated sensing and communication (ISAC) scenario, how the millimeter - wave (mmWave) channel is affected by human body scattering and blocking. Specifically, the paper focuses on the influence of a person's position and orientation in an indoor environment on the millimeter - wave channel characteristics in a dual - band (24 GHz and 60 GHz) and distributed beamforming environment.
### Research Background
With the introduction of 5G NR and IEEE 802.11ay standards, millimeter - wave communication has been widely used in high - speed, low - latency wireless communication scenarios, such as virtual reality, Industry 5.0, and autonomous driving. However, in complex dynamic indoor environments, the presence and movement of the human body can have unpredictable impacts on millimeter - wave communication, making practical applications challenging. In order to achieve ISAC (integrated sensing and communication), it is crucial to accurately model the interaction between the human body and millimeter - waves.
### Research Objectives
The main objective of this paper is to study the influence of a person at different positions and orientations on the channel by measuring and analyzing the millimeter - wave channel characteristics under dual - band, distributed multiple - input multiple - output (MIMO) beamforming. Specifically, it includes the following aspects:
1. **Measurement Setup**:
- Use a distributed MIMO channel sounder with dual - bands (24 GHz and 60 GHz) for measurement.
- Introduce a distributed RGBD camera system to capture the real - position and orientation of the human body.
2. **Measurement Scenarios**:
- In an office environment, set up multiple transmitters (Tx) and receivers (Rx), as well as four depth cameras.
- Measure the channel characteristics of a person at eight different positions and eight different orientations.
3. **Channel Characteristics Analysis**:
- Analyze channel parameters such as power delay profile (PDP), delay spread (DS), and angle - delay power spectrum (ADPS) in the presence and absence of the human body.
- Study the influence of human body position and orientation on the channel delay and angle - domain characteristics.
### Main Findings
- **Delay Characteristics**: The presence of the human body significantly changes the delay characteristics of the channel. Especially in the first Fresnel zone, human body blocking can lead to a large increase in delay spread.
- **Angle Characteristics**: The orientation of the human body significantly affects the angle spread (ASA and ASD) of the channel, with a maximum change of 30 to 40 degrees.
- **Band Difference**: The 60 - GHz band has a higher delay resolution, so the change in the presence and absence of the human body is more obvious; while the 24 - GHz band is mainly affected by human body reflection.
### Conclusions
Through measurement and analysis, the paper reveals the profound influence of the human body on millimeter - wave channel characteristics in a multi - path - rich indoor environment. These findings provide an important reference for the deployment of ISAC systems, especially in link topology design and frequency band selection. Future research will further explore how to use the complementary characteristics of dual - bands to improve ISAC performance.
### Formula Summary
The formulas involved in the paper mainly include:
- Power Delay Profile (PDP):
\[
PDP_{n_\tau} = \sum_{n_\phi^R = 1}^{N_\phi^R} \sum_{n_\phi^T = 1}^{N_\phi^T} |h_{n_\tau, n_\phi^R, n_\phi^T}|^2
\]
- Root Mean Square Delay Spread (RMS DS):
\[
\sigma_{DS} = \sqrt{\frac{\sum_{n_\tau = 1}^{N_\tau} \tau^2 PDP_{n_\tau}}{\sum_{n_\tau = 1}^{N_\tau} PDP_{n_\tau}} - \left( \frac{\sum_{n_\tau = 1}^{N_\tau} \tau PDP_{n_\tau}}{\sum_{n_\tau = 1}^{N_\tau} PDP_{n_\tau}} \right)^2}
\]
- Angle - Delay Power Spectrum (ADPS):
\[
ADPS_{n_\tau, n_\phi^T} = \sum_{n_\phi^R = 1}^{N_\phi^R} |h_{n_\tau, n_