Abstract:In this study, the IN625/WC composite coatings with different WC contents were fabricated on 304 stainless steel using laser cladding, and their mechanical properties and microstructures were analyzed. With the increase of WC content, the hardness and wear resistance of the composite coating were significantly improved. The content of WC reinforcing particles affected the composition and quantity of intergranular precipitates in the coating, and the reinforcing particles refined the grain structure of the coating. In addition, the Thermo-Calc software was secondary developed using python to calculate each component point cyclically and to automate post-processing of the resulting data. The changes of γ matrix, δ phase, σ phase, Laves, M 23 C 6 and other phases in the composite coating with temperature and WC content were simulated. The calculated data are in good agreement with the actual experimental law. Combined with the experiments and simulations of laser cladding composite coating, the precipitation process and final content of each phase in the coating were analyzed. It was found that with the increase of WC content, the mole fraction of M 23 C 6 , M 12 C and other phases in the composite coating increased, while the mole fraction of γ phase, σ phase and other precipitates decreased. The intergranular precipitates phase content can be calculated in advance during the preparation of composite coatings, and an appropriate amount of reinforcement can be added according to performance requirements to effectively control the precipitation of enhance phase (such as γ' phase) and harmful phase (such as σ phase) from the chemical composition. This study provides a reference for the improvement of mechanical properties of composite coatings by laser cladding.

Very high cycle fretting fatigue behavior of IN718 reinforced by IN625/20% WC laser cladding

Analysis of the crack initiation and short crack propagation of laser cladding IN718 enduring fretting fatigue at 650 °C

Microstructure and Wear Properties of IN718/WC Composite Coating Fabricated by Ultrasonic Vibration-Assisted Laser Cladding

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Very-High-Cycle-Fatigue Property of IN 718 Manufactured by Selective Laser Melting at Elevated Temperature: Microstructure-Related Failure Behavior and Life Prediction

Exploring elevated temperature fretting wear behaviour of wrought and laser powder bed fusion IN718 superalloy

A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718

Rolling Contact Fatigue Behavior of Laser Cladded WC/Ni Composite Coating

Influence of post-processing on very high cycle fatigue resistance of Inconel 718 obtained with laser powder bed fusion

Friction Performance Analysis of WC-Reinforced IN718 Composite Material Based on SLM Process

Tensile Properties and Fracture Behavior of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle Studied by In-Situ Tensile Testing

Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes

In-situ SEM-EBSD investigation of the low-cycle fatigue deformation behavior of Inconel 718 at grain-scale

Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature

Experimental and temperature field simulation study of Inconel 718 surface cladding based on vacuum electron beam heat source

Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects

Laser Cladding In625/Wc Composite Coatings: Properties,Microstructures and Quantitative Phase Analysis

Lcf Assessment Of Electron-Beam-Welded Notched Parts Of Nickel-Based Superalloy Inconel 718

Microstructure and high-temperature wear behaviour of Inconel 625 multi-layer cladding prepared on H13 mould steel by a hybrid additive manufacturing method

Microstructure and wear properties of laser-clad NiCo alloy coating on Inconel 718 alloy

Multi-scale Study of Subsurface Fatigue Cracking Behavior of Laser-Powder Bed Fused Inconel 718 at Stress Ratios and Temperatures