Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

Geometric Uncertainty of Patient-Specific Blood Vessels and its Impact on Aortic Hemodynamics

The effects of clinically-derived parametric data uncertainty in patient-specific coronary simulations with deformable walls

Computational framework for the generation of one-dimensional vascular models accounting for uncertainty in networks extracted from medical images

Uncertainty quantification of the lattice Boltzmann method focussing on studies of human-scale vascular blood flow

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Geometric uncertainty in patient-specific cardiovascular modeling with convolutional dropout networks

Blood flow simulation and uncertainty quantification in extensive microvascular networks: Application to brain cortical networks

Helical Flow As a New Determinant of Coronary Plaque Vulnerability: a Glimpse into the Future

Evaluating Uncertainties in CFD Simulations of Patient-Specific Aorta Models using Grid Convergence Index Method

A Bi-fidelity Surrogate Modeling Approach for Uncertainty Propagation in Three-Dimensional Hemodynamic Simulations

Efficient Uncertainty Quantification in a Multiscale Model of Pulmonary Arterial and Venous Hemodynamics

Effects of Image Uncertainty on Blood Flow Simulation

Abstract 122: Reliability Analysis for Image-based Non-invasive Pressure Quantification in Aortorenal Artery Systems

Computer Simulations of Pulsatile Human Blood Flow Through 3D-Models of the Human Aortic Arch, Vessels of Simple Geometry and a Bifurcated Artery: Investigation of Blood Viscosity and Turbulent Effects

Uncertainty quantification of inflow boundary condition and proximal arterial stiffness coupled effect on pulse wave propagation in a vascular network

Personalized and uncertainty-aware coronary hemodynamics simulations: From Bayesian estimation to improved multi-fidelity uncertainty quantification

Multilevel and multifidelity uncertainty quantification for cardiovascular hemodynamics

Uncertainty quantification of the wall thickness and stiffness in an idealized dissected aorta

Random boundaries: quantifying segmentation uncertainty in solutions to boundary-value problems

Influence of Material Parameter Variability on the Predicted Coronary Artery Biomechanical Environment via Uncertainty Quantification

Personalized numerical simulation for hemodynamics of abdominal aortic aneurysm: analysis of simulation results sensitivity to the input boundary conditions