Abstract:Reconfigurable intelligent surface (RIS) is pivotal for beyond 5G networks in regards to the surge demand for reliable communication in unmanned aerial vehicle (UAV) networks. This paper presents an innovative approach to maximize connectivity of UAV networks using RIS deployment and virtual partitioning, wherein an RIS is deployed to assist in the communications between an user-equipment (UE) and blocked UAVs. Closed-form (CF) expressions for signal-to-noise ratio (SNR) of the two-UAV setup are derived and validated. Then, an optimization problem is formulated to maximize network connectivity by optimizing the 3D deployment of the RIS and its partitioning subject to predefined quality-of-service (QoS) constraints. To tackle this problem, we propose a method of virtually partitioning the RIS given a fixed 3D location, such that the partition phase shifts are configured to create cascaded channels between the UE and the blocked two UAVs. Then, simulated-annealing (SA) method is used to find the 3D location of the RIS. Simulation results demonstrate that the proposed joint RIS deployment and partitioning framework can significantly improve network connectivity compared to benchmarks, including RIS-free and RIS with a single narrow-beam link.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: **How to improve the connectivity of unmanned aerial vehicle (UAV) networks through the deployment and partitioning of reconfigurable intelligent surfaces (RIS)**. Specifically, the paper aims to optimize the three - dimensional deployment position of RIS and its virtual partition configuration to enhance the quality of communication links between user equipment (UE) and blocked UAVs, thereby maximizing the overall connectivity of the network.
### Problem Background
With the surging demand for wireless devices (such as user equipment and UAVs), especially in dense urban environments, the blockage of direct communication links has become an ongoing challenge. Traditional solutions such as adding relay nodes or more UAVs are not always feasible because they are restricted by factors such as site limitations, cost, and power consumption. In addition, UAVs are prone to failure due to limited energy.
### Solution
The paper proposes an innovative method to improve the connectivity of UAV networks through the following two aspects:
1. **Three - Dimensional Deployment of RIS**: Determine the optimal three - dimensional position of RIS to optimize its signal reflection effect.
2. **Virtual Partitioning of RIS**: Divide RIS into multiple parts, and each part is specially configured with phase shift to create a cascaded channel, thereby enhancing the communication quality of specific UAVs.
### Specific Objectives
- **Maximize Network Connectivity**: By optimizing the deployment and partitioning of RIS, ensure that the algebraic connectivity of the network is maximized under the predefined quality - of - service (QoS) constraints.
- **Derive Closed - Form Expressions**: Derive a closed - form expression for the signal - to - noise ratio (SNR) and verify its validity.
- **Model the Optimization Problem**: Construct an optimization problem to maximize network connectivity while considering the 3D deployment and partitioning of RIS.
### Key Formulas
1. **SNR Expression**:
\[
\gamma_j(\alpha, \rho)=\frac{p \beta_{UR}(\alpha) \beta_{RK_j}(\alpha)\left|\sum_{n = 1}^{N_j}g_{URK_{n,j}}e^{j\theta_n}\right|^2}{N_0}
\]
where $\alpha$ is the three - dimensional coordinate of RIS, $\rho_j$ is the proportion of RIS elements assigned to the $j$ - th UAV, $N_j=\lceil\rho_jN\rceil$, $g_{URK_{n,j}}$ is the channel coefficient from UE to the $n$ - th element of RIS and then to UAV $j$, and $\theta_n$ is the phase shift of the $n$ - th RIS element.
2. **Optimization Problem**:
\[
\max_{\rho,\alpha}\lambda_2(M'(\rho,\alpha))
\]
The constraints include:
- $\gamma_x(\rho,\alpha)\geq\gamma_{RIS}^0$
- $\gamma_y(\rho,\alpha)\leq\zeta\gamma_{RIS}^0$
- $\sum_{j = 1}^2\rho_j\leq1$
- $0\preceq\rho\preceq1$
- $-\infty\preceq\alpha\preceq\infty$
Through these methods, the paper shows that the proposed joint optimization framework can significantly improve network connectivity, outperforming the benchmark schemes, including networks without RIS and RIS networks with only one narrow - beam link.