Design of the tertiary optical system for the Large Latin American Millimeter Array radio telescope

Emiliano Rasztocky,Matias Rolf Hampel,Rodrigo Reeves,Jacques R. D. Lepine,Gustavo Esteban Romero

DOI: https://doi.org/10.1117/1.JATIS.10.4.044001

2024-10-23

Abstract:Many modern radio telescopes employ an observational strategy that involves maximizing the use of their available spaces (cabins), outfitting them with various receivers at different frequencies to detect incoming signals from the sky simultaneously or individually. The Large Latin American Millimeter Array (LLAMA), is a joint venture between Argentina and Brazil consisting of the installation and operation of a 12-meter aperture Cassegrain telescope. It features three available cabins for instrumentation and plans to install six single-pixel heterodyne receivers, covering different bandwidths in the 30 to 950 GHz window of the electromagnetic spectrum, in its two lateral Nasmyth cabins at different phases of the project. Therefore, it is crucial not only to design a tertiary optical system that couples the antenna beam to those receivers, but also to do it in a scalable way. The primary goal for the design is to simultaneously maximize the antenna efficiency while minimizing optical aberrations for all receivers, both fundamental aspects for the optimal functioning of cutting-edge astronomical instruments. In this paper, we present the entire design process, starting from the quasi-optical approach based on the propagation of a fundamental Gaussian beam mode, continuing with the validation of the design based on physical optics simulations, and ending with a tolerance analysis of the system. As a result of this process, a frequency independent tertiary optical system has been achieved for almost all the receivers, which is expected to provide high optical performance for the radio telescope.

Instrumentation and Methods for Astrophysics,Applied Physics

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to design an efficient three - level optical system (NACOS) for coupling the antenna beam of the LLAMA radio telescope to receivers at different frequencies, in order to achieve multi - band observations. Specifically, the research aims to:

1. **Maximize antenna efficiency**: Ensure the highest antenna efficiency can be obtained on all receivers.
2. **Minimize optical aberration**: Reduce the aberration of the optical system to ensure high - quality observation signals.
3. **Frequency - independence**: Design a frequency - independent optical system so that receivers in different frequency bands can work efficiently.
4. **Scalability**: Design an extensible system so that it can be easily upgraded and more receivers can be added in the future.

To achieve these goals, the paper describes in detail the design process starting from the quasi - optical method (the basic mode propagation based on Gaussian beams), including physical - optical simulation verification and tolerance analysis of the system. Eventually, the researchers successfully designed a frequency - independent three - level optical system applicable to almost all receivers, which is expected to provide high - performance optical performance for the radio telescope.

### Key Formulas

- The radius of curvature \(R(z)\) and the transverse radius \(\omega(z)\) of the Gaussian beam:
\[
R(z)=z + \frac{z_0^2}{z}
\]
\[
\omega(z)=\omega_0\sqrt{1+\left(\frac{z}{z_0}\right)^2}
\]
where \(z_0 = \frac{\pi\omega_0^2}{\lambda}\) is the Rayleigh length, \(\omega_0\) is the beam waist radius, and \(\lambda\) is the wavelength.

- The output beam waist position \(d_{out}\) and the output beam waist radius \(\omega_{0, out}\) in the ABCD matrix method:
\[
d_{out}=-\frac{(A d_{in}+B)(C d_{in}+D)+A C z_c^2}{(C d_{in}+D)^2+C^2 z_c^2}
\]
\[
\omega_{0, out}=\frac{\omega_{0, in}}{\sqrt{(C d_{in}+D)^2+C^2 z_c^2}}
\]
where \(z_c=\frac{\pi\omega_0^2}{\lambda}\), and \(A, B, C, D\) are elements of the ABCD matrix.

Through these formulas and design methods, the researchers ensure the efficiency and stability of the optical system, providing solid technical support for the multi - band observations of the LLAMA radio telescope.