Abstract:The laminar flow interface (LFI) developed at low Reynolds numbers is one of the most prominent features of microscale flows and has been employed in a diverse range of optofluidic applications. The formation of LFIs usually requires the manipulation of multiple streams within a microchannel using a complex hydrodynamic pumping system. Herein, we present a new type of LFI that is generated by fluid switching within a three-dimensional (3D) microlens-incorporating microfluidic chip (3D-MIMC). Since Poiseuille flows exhibit a parabolic velocity profile, the LFI is cone-like in shape and acts as a transient refractive interface (TRI), which is sensitive to the refractive index (RI) and the Péclet number (Pe) of the switching fluids. In response to the TRI, the intensity of the transmitted light can be intensified or attenuated depending on the sequence of fluid switching operations. By incorporating three-dimensional (3D) microlenses and increasing the Pe values, the profile and amplitude of the intensity peak are both significantly improved. The limit of detection (LoD) for a sodium chloride (NaCl) solution at Pe = 1363 is as low as 0.001% (w/w), representing an improvement of 1-2 orders of magnitude when compared to existing optofluidic concentration sensors based on intensity modulation. Fluid switching of a variety of inorganic and organic sample fluids confirms that the specific optical response (Kor) correlates positively with both Pe and the specific RI (Knc), obeying a linear relationship. This model is further verified through cross-validations and used to estimate the molecular diffusion coefficient (D) of a range of species. Furthermore, by virtue of the TRI, we achieve a sensitive measurement of optical-equivalent total dissolved solids (OE-TDS) for environmental samples.

3D Optofluidic Control Using Reconfigurable Thermal Barriers

Long-range optofluidic control with plasmon heating

Hybrid Optofluidics and Three-Dimensional Manipulation Based on Hybrid Photothermal Waveguides

Opto-fluidically multiplexed assembly and micro-robotics

Innovative 3D Microfluidic Tools for On-Chip Fluids and Particles Manipulation: From Design to Experimental Validation

Laser microfluidics: fluid actuation by light

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Microbubble-assisted Optofluidic Control Using a Photothermal Waveguide

Programmed Internal Reconfigurations in a 3D-Printed Mechanical Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array

Asymmetric thermal optofluidics based on plasmonic multilayered nanostructures

Programmed Internal Reconfigurations in a 3D-Printed Auxetic Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array

An Integrated Droplet Manipulation Platform with Photodeformable Microfluidic Channels

A Bioinspired Photothermal Pneumatic Device Enabling Optical Manipulation of Microfluid toward Precise Control of Microreactions

Design and Fabrication of a Tunable Optofluidic Microlens Driven by an Encircled Thermo-Pneumatic Actuator

Microfluid Switching-Induced Transient Refractive Interface

Building Reconfigurable Devices Using Complex Liquid–Fluid Interfaces

Programmable capillary action controls fluid flows

Novel Optofluidic Imaging System Integrated with Tunable Microlens Arrays

Quantitative 3D Mapping of Fluidic Temperatures within Microchannel Networks Using Fluorescence Lifetime Imaging

Programmable Microfluidic Manipulations for Biomedical Applications

Direct laser writing-enabled 3D printing strategies for microfluidic applications