Abstract:Background In the US, 1.4 million people have implanted ICDs for reducing the risk of sudden death due to ventricular arrhythmias. Cardiac MRI (cMR) is of particular interest in the ICD patient population as cMR is the optimal imaging modality for distinguishing cardiac conditions that predispose to sudden death, and it is the best method to plan and guide therapy. However, all ICDs contain a ferromagnetic transformer which imposes a large inhomogeneous magnetic field in sections of the heart, creating large image voids that can mask important pathology. A shim system was devised to resolve these ICD issues. A shim coil system (CSS) that corrects ICD artifacts over a user-selected Region-of-Interest (ROI), was constructed and validated. Methods A shim coil was constructed that can project a large magnetic field for distances of ~15 cm. The shim-coil can be positioned safely anywhere within the scanner bore. The CSS includes a cantilevered beam to hold the shim coil. Remotely controlled MR-conditional motors allow 2 mm-accuracy three-dimensional shim-coil position. The shim coil is located above the subjects and the imaging surface-coils. Interaction of the shim coil with the scanner’s gradients was eliminated with an amplifier that is in a constant current mode. Coupling with the scanners’ radio-frequency (rf) coils, was reduced with shielding, low-pass filters, and cable shield traps. Software, which utilizes magnetic field (B 0 ) mapping of the ICD inhomogeneity, computes the optimal location for the shim coil and its corrective current. ECG gated single- and multiple-cardiac-phase 2D GRE and SSFP sequences, as well as 3D ECG-gated respiratory-navigated IR-GRE (LGE) sequences were tested in phantoms and N = 3 swine with overlaid ICDs. Results With all cMR sequences, the system reduced artifacts from >100 ppm to <25 ppm inhomogeneity, which permitted imaging of the entire left ventricle in swine with ICD-related voids. Continuously acquired Gradient recalled echo or Steady State Free Precession images were used to interactively adjust the shim current and coil location. Conclusion The shim system reduced large field inhomogeneities due to implanted ICDs and corrected most ICD-related image distortions. Externally-controlled motorized translation of the shim coil simplified its utilization, supporting an efficient cardiac MRI workflow.

Adaptive Radiofrequency Shimming in MRI using Reconfigurable Dielectric Materials

A Novel Passive Shimming Method for the Correction of Magnetic Fields above the Patient Bed in MRI.

A Hybrid Field-Harmonics Approach for Passive Shimming Design in Mri

Using additional dielectric material to improve the RF uniformity in traveling-wave MRI

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

Reliable Off-Resonance Correction in High-Field Cardiac MRI Using Autonomous Cardiac B0 Segmentation with Dual-Modality Deep Neural Networks.

A review of recent developments and applications of high‐permittivity dielectric shimming in magnetic resonance

In vivo B1+ enhancement of calf MRI at 7 T via optimized flexible metasurfaces

Radiofrequency‐transparent local B0 shimming coils using float traps

Improving B1 homogeneity in abdominal imaging at 3 T with light and compact metasurface

Advancements in MR hardware systems and magnetic field control: B0 shimming, RF coils, and gradient techniques for enhancing magnetic resonance imaging and spectroscopy

Improvement in B1+ Homogeneity and Average Flip Angle Using Dual-Source Parallel RF Excitation for Cardiac MRI in Swine Hearts

Balanced-force shim system for correcting magnetic-field inhomogeneities in the heart due to implanted cardioverter defibrillators

RF shimming in the cervical spinal cord at 7 T

Improvement In B-1(+) Homogeneity And Average Flip Angle Using Dual-Source Parallel Rf Excitation For Cardiac Mri In Swine Hearts

3D printing of ferromagnetic passive shims for field shaping in magnetic resonance imaging

Optimizing Transmit Field Inhomogeneity of Parallel RF Transmit Design in 7T MRI using Deep Learning

Improving Magnetic Resonance Imaging with Smart and Thin Metasurfaces

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

B0-Shimming Methodology for Affordable and Compact Low-Field Magnetic Resonance Imaging Magnets

A Design Method of Artificial Electromagnetic Materials for Ultra-High Field Magnetic Resonance Imaging