Abstract:Laser powder bed fusion (LPBF), also called selective laser melting, is an additive manufacturing technology with great potential for creating three-dimensional metallic components with intricate designs. The application of dynamic thermal cycles involving melting and cooling makes it difficult to maintain the desired surface quality and shape in the LPBF process. The LPBF process's dynamic stability of the melt pool is essential to ascertain due to its influence on the quality of the manufactured products. Examining the thermal behavior and temperature distribution inside the melt pool is necessary. Subsequent to experimental validation, employing a finite element model (FEM) has the potential to accurately define thermal distributions and the dimensions of the melt pool. A three-dimensional transient model based on a moving Gaussian heat source was employed in this study to examine the influence of process variables (i.e., scan velocity, laser power, laser beam radius, hatch spacing, number of layers, and scan angle for each layer) on the melt pool shape in LPBF of SS316L powder. A finite element model based on three-dimensional parameters was proposed to evaluate the temperature gradient and melt pool characteristics of SS316L when subjected to laser powder bed fusion. The method takes into account the effect of the laser penetration depth on the characteristics of the molten pool, determined by a multiple-layer (15) and multiple-track (6) finite element model with variable process parameters, such as laser power, scanning speed, beam radius and hatch spacing. Experimental data obtained from the literature were used to calibrate the proposed heat source model, and the adjusted finite element model was then validated through further experiments. The modeling results showed concordance with the experimental data. The effects of the interlayer and intertrack were examined. Temperature distributions for each track and layer and the depth, width and length of the melt pool were evaluated, and the observed values for each variable were analyzed. The average melt pool length, width, and depth were determined to have relative errors of 1.88%, 1.49%, and 2.12%, respectively, between the FEM model and experimentally measured dimensions for an optimal range of varied process parameters.

A rapid experimental workflow for studying melt track scaling in laser powder bed fusion using high-precision metal template substrates

Particle tracking in a simulated melt pool of laser powder bed fusion

Melt pool dynamics and pores formation in multi-track studies in laser powder bed fusion process

Analytical Modelling of Scanning Strategy Effect on Temperature Field and Melt Track Dimensions in Laser Powder Bed Fusion

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Fast-throughput simulations of laser-based additive manufacturing in metals to study the influence of processing parameters on mechanical properties

A novel paradigm for feedback control in LPBF: layer-wise correction for overhang structures

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction

Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Numerical and Experimental Characterization of Melt Pool in Laser Powder Bed Fusion of SS316l

Numerical Investigation into the Effect of Different Parameters on the Geometrical Precision in the Laser-Based Powder Bed Fusion Process Chain

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Modeling and numerical studies of high-precision laser powder bed fusion

Systematic investigation into laser powder bed fusion of Ti-5553 through single-track and multi-layer studies for tailored manufacturing solutions

Finite element modeling of melt pool dynamics in laser powder bed fusion of 316L stainless steel

Modeling of rapid solidification in Laser Powder Bed Fusion processes

Melt pool width measurement in a multi-track, multi-layer laser powder bed fusion print using single-camera two-wavelength imaging pyrometry

Unveiling Processing--Property Relationships in Laser Powder Bed Fusion: The Synergy of Machine Learning and High-throughput Experiments

Experimental and numerical exploration of defocusing in Laser Powder Bed Fusion (LPBF) as an effective processing parameter

Mesoscale Simulation of Laser Powder Bed Fusion with an Increased Layer Thickness for AlSi10Mg Alloy