Design and Scalable Synthesis of Thermochromic VO2-Based Coatings for Energy-Saving Smart Windows with Exceptional Optical Performance

Michal Kaufman,Jaroslav Vlcek,Jiri Houska,Sadoon Farrukh,Stanislav Haviar

2024-09-03

Abstract:We report strongly thermochromic YSZ/V0.855W0.018Sr0.127O2/SiO2 coatings, where YSZ is Y stabilized ZrO2, prepared using a scalable deposition technique on standard glass at a low substrate temperature of 320 °C and without any substrate bias voltage. The coatings exhibit a transition temperature of 22 °C with an integral luminous transmittance of 63.7% (low-temperature state) and 60.7% (high-temperature state), and a modulation of the solar energy transmittance of 11.2%. Such a combination of properties, together with the low deposition temperature, fulfill the requirements for large-scale implementation on building glass and have not been reported yet. Reactive high-power impulse magnetron sputtering with a pulsed O2 flow feedback control allows us to prepare crystalline W and Sr co-doped VO2 of the correct stoichiometry. The W doping of VO2 decreases the transition temperature, while the Sr doping of VO2 increases the luminous transmittance significantly. A coating design utilizing a second-order interference in two antireflection layers is used to maximize both the integral luminous transmittance and the modulation of the solar energy transmittance. A compact crystalline structure of the bottom YSZ antireflection layer further improves the VO2 crystallinity, while the top SiO2 antireflection layer provides also the mechanical and environmental protection for the V0.855W0.018Sr0.127O2 layer.

Applied Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the design and synthesis of energy - saving smart window coatings for large - scale application on architectural glass. Specifically, the research objective is to develop a thermochromic coating with the following characteristics:

1. **Low transition temperature (Ttr)**: Close to room temperature (25°C or lower) so as to respond automatically to daily environmental temperature changes.
2. **High visible light transmittance (Tlum)**: Greater than 60% in both low - temperature and high - temperature states to ensure sufficient natural lighting.
3. **High solar energy transmittance modulation (ΔTsol)**: Greater than 10% to effectively regulate indoor temperature.
4. **Low deposition temperature (Ts)**: Not exceeding 300°C to adapt to the conventional glass substrates in large - scale production.
5. **Long - term environmental stability**: Ensure the durability and reliability of the coating in practical use.
6. **More attractive color**: Avoid common yellow or brown and improve the visual effect.

To achieve these goals, the researchers designed and synthesized a three - layer coating of YSZ/V0.855W0.018Sr0.127O2/SiO2, where YSZ is yttrium - stabilized zirconia. Through the reactive high - power pulsed magnetron sputtering technique (HiPIMS) combined with pulsed O2 flow feedback control, the low deposition temperature and accurate stoichiometry of the coating were achieved. In addition, through the co - doping of W and Sr, the transition temperature was successfully reduced and the visible light transmittance was increased. Finally, this coating has a transition temperature of 22°C, a visible light transmittance of 63.7% in the low - temperature state, a visible light transmittance of 60.7% in the high - temperature state, and a solar energy transmittance modulation of 11.2%, meeting the requirements for large - scale application.