Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Influence of Cavity Geometry on the Bubble Dynamics of Nucleate Pool Boiling

Nucleate Boiling Performance Evaluation of Cavities at Mesoscale Level

Two-dimensional Mesoscale Simulations of Saturated Pool Boiling from Rough Surfaces. Part II: Bubble Interactions above Multi-Cavities

Performance evaluation of the cavities on nucleate boiling at microscale level

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

An experimental study on the effect of liquid film thickness on bubble dynamics

Numerical Study of Bubble Coalescence Heat Transfer During Nucleate Pool Boiling

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Numerical simulation on subcooled pool boiling bubble behavior

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Numerical Simulation and Experimental Observations of Confined Bubble Growth During Flow Boiling in a Microchannel with Rectangular Cross-Section of High Aspect Ratio

Experimental study of bubble interactions during nucleate boiling

Bubble interaction and heat transfer characteristics of microchannel flow boiling with single and multiple cavities

Direct numerical simulation of bubble dynamics and heat transfer during nucleate boiling on the micro-pin-finned surfaces

Lattice Boltzmann Simulation of Flow Boiling Heat Transfer Process in a Horizontal Microchannel with Rectangular Cavities

Two-dimensional mesoscale simulations of saturated pool boiling from rough surfaces. Part I: Bubble nucleation in a single cavity at low superheats

Boiling Heat Transfer in Microcapillary Grooves with Different Structured Surfaces of Microcavities

Mechanism for Nucleation Jet Enhancement of Nucleate Pool Boiling

Bubble Dynamics in Nucleate Pool Boiling on Micro-Pin-finned Surfaces in Microgravity

Numerical Study of Bubble Growth and Merger Characteristics During Nucleate Boiling

Numerical Simulation of Single Bubble Growth and Heat Transfer Considering Multi-Parameter Influence During Nucleate Pool Boiling of Water