Abstract:Squeezing, collision, friction and other behaviors are widely present in the post-harvest processing operations of bananas, such as field picking, de-handing, cleaning, packaging and transportation, which will inevitably cause a certain degree of mechanical damage to banana fruits. In view of the difficulty in accurately detecting and quantifying fruit damage in the early stage of production, this paper adopted dynamic finite element numerical simulation and multi-parameter optimization of response surface to carry out simulation analysis on the collision behavior of banana fruit in the post-harvest operations, and the accurate assessment and quantitative characterization of fruit damage degree and erosion rule were carried out. The three-dimensional solid model of banana was established by reverse engineering method based on 3D scanning technology. The multi-scale finite element model of banana was further established by combining the constitutive parameters of banana bunch obtained from quasi-static mechanical experiments. In this study, a total of 27 collision systems including different contact materials, collision angles and impact speeds were developed to quantitatively characterize the changing rules of contact force, equivalent stress, energy, damage volume and bruise susceptibility of fruit under different experimental scenarios. An empirical prediction model for banana fruit's bruise susceptibility was established using response surface optimization methodology, and the comprehensive effects of contact material, collision angle and impact speed on fruit damage were obtained. On this basis, three dynamic collision systems including banana hand and impact panel were developed, and the generation region and erosion rule of equivalent stress of banana hand and impact panel under different encounter postures were further investigated. Finally, the physical verification experiments of banana impact and collision were carried out based on the characteristics of banana growth distribution and movement in the actual post-harvest operations. The experimental results showed that the prediction models of bruising susceptibility of banana fruit under different scenarios achieved a prediction accuracy of more than 80%. The residual stress inside the banana hand under Posture_3 is the smallest (2.55e-2 MPa), and the maximum relative error between the predicted value and the experimental value of bruising susceptibility is less than 8.5%. These results indicate that the multi-scale dynamic finite element model and the empirical prediction model of collision system for bananas are reasonable and correct, and the study have certain reference value for the numerical simulation and quantitative characterization of damage degree of other fruits and vegetables.

Potential for damage to fruits during transport through cross-section constrictions

Dynamic Finite Element Simulation of the Collision Behavior and Multi-Parameter Quantitative Characterization of the Damage Degree of Banana Fruit in the Post-Harvest Operations

A Lennard-Jones Potential Based Cohesive Zone Model and Its Application in Multiscale Damage Simulation of Graphene Reinforced Nanocomposites

Dynamic Response Characteristics and Damage Modes of Multifunctional Layered Hydrogen Storage Vessels under Impact Loads

Physiological and Qualitative Responses to Simulated Transport Vibration in Kiwifruit

Biomechanics of fruits and vegetables

Prediction of Bruise Susceptibility of Harvested Kiwifruit (actinidia Chinensis) Using Finite Element Method

Mechanical damages and packaging methods along the fresh fruit supply chain: A review

Excess Water Loss Induced by Simulated Transport Vibration in Postharvest Kiwifruit

Application of finite element method to estimate the bruise damage of kiwifruit under drop impact loading

The Steady-state Sinusoidal Dynamic Behaviour of Peach and Pear

Kinetics Simulation of the Crucial Points on a Fruit Grading and Packing Line

A computational study of cell membrane damage and intracellular delivery in a cross-slot microchannel

Analysis of Contact Stress about Extrusion of Fruit

Predicting Cantaloupe Bruising Using Non-Linear Finite Element Method

Theoretical, numerical and identification aspects of a new model class for ductile damage

MECHANICAL MODEL OF CERASUS HUMILIS ESTABLISHED BY UNIAXIAL COMPRESSION PHYSICAL TEST AND VIRTUAL SIMULATION

Modeling Transport in Porous Media With Phase Change: Applications to Food Processing

Finite element modelling for fruit stress analysis - A review

Analytical and numerical solutions of pore formation in elastic food materials during dehydration

Application of Material Point Method and Mohr-Coulomb Strain Softening Constitutive Model in Simulations of Multiphase Granular Flows