Abstract:Squeezing, collision, friction and other behaviors are widely present in the post-harvest processing operations of bananas, such as field picking, de-handing, cleaning, packaging and transportation, which will inevitably cause a certain degree of mechanical damage to banana fruits. In view of the difficulty in accurately detecting and quantifying fruit damage in the early stage of production, this paper adopted dynamic finite element numerical simulation and multi-parameter optimization of response surface to carry out simulation analysis on the collision behavior of banana fruit in the post-harvest operations, and the accurate assessment and quantitative characterization of fruit damage degree and erosion rule were carried out. The three-dimensional solid model of banana was established by reverse engineering method based on 3D scanning technology. The multi-scale finite element model of banana was further established by combining the constitutive parameters of banana bunch obtained from quasi-static mechanical experiments. In this study, a total of 27 collision systems including different contact materials, collision angles and impact speeds were developed to quantitatively characterize the changing rules of contact force, equivalent stress, energy, damage volume and bruise susceptibility of fruit under different experimental scenarios. An empirical prediction model for banana fruit's bruise susceptibility was established using response surface optimization methodology, and the comprehensive effects of contact material, collision angle and impact speed on fruit damage were obtained. On this basis, three dynamic collision systems including banana hand and impact panel were developed, and the generation region and erosion rule of equivalent stress of banana hand and impact panel under different encounter postures were further investigated. Finally, the physical verification experiments of banana impact and collision were carried out based on the characteristics of banana growth distribution and movement in the actual post-harvest operations. The experimental results showed that the prediction models of bruising susceptibility of banana fruit under different scenarios achieved a prediction accuracy of more than 80%. The residual stress inside the banana hand under Posture_3 is the smallest (2.55e-2 MPa), and the maximum relative error between the predicted value and the experimental value of bruising susceptibility is less than 8.5%. These results indicate that the multi-scale dynamic finite element model and the empirical prediction model of collision system for bananas are reasonable and correct, and the study have certain reference value for the numerical simulation and quantitative characterization of damage degree of other fruits and vegetables.

Physiological and Qualitative Responses to Simulated Transport Vibration in Kiwifruit

Effects of Anti-vibration Package in Simulated Transportation of Kiwifruit

Excess Water Loss Induced by Simulated Transport Vibration in Postharvest Kiwifruit

Firmness Measurement of Kiwifruit Using a Self-Designed Device Based on Acoustic Vibration Technology

An integrated quality, physiological and transcriptomic analysis reveals mechanisms of kiwifruit response to postharvest transport vibrational stress

Vibration Damage and Anti-Vibration Packaging of Fruits and Vegetables During Transportation

Dynamic Finite Element Simulation of the Collision Behavior and Multi-Parameter Quantitative Characterization of the Damage Degree of Banana Fruit in the Post-Harvest Operations

Comparison of online quality prediction models of kiwifruit at different conveying speeds

Potential Regulator of Ethylene and ABA in Aroma Recovery of Kiwifruit after Transferring from Cold Storage

Physiological Responses of Fig Fruit to Non-Wounding Vibration

Research Progress of Mechanical Damage in Postharvest Fruits and Vegetables

Tracing Internal Quality and Aroma of a Red-Fleshed Kiwifruit During Ripening by Means of GC-MS and E-nose

Effects of cushioning materials and temperature on quality damage of ripe peaches according to the vibration test

Impact of vibration on the quality of tomato produced by stimulated transport

Application of finite element method to estimate the bruise damage of kiwifruit under drop impact loading

Effect of Vibration Stress on Selected Chemical Parameters of "Bluecrop" Highbush Blueberry (Vaccinium corymbosum L.) and Grape (Vitis vinifera L.)

Effects of Different Vibration Spectrum Shapes on Mechanical Damage of Postharvest Huangguan Pear During Transportation

The Steady-state Sinusoidal Dynamic Behaviour of Peach and Pear

Prediction of Bruise Susceptibility of Harvested Kiwifruit (actinidia Chinensis) Using Finite Element Method

Studies on Vibration Characteristics of a Pear Using Finite Element Method

Application of Melatonin in Kiwifruit (actinidia Chinensis) Alleviated Chilling Injury During Cold Storage