A three-layer model for the dam-break flow of particulate suspensions driven by sedimentation

Andrea Bondesan,Laurence Girolami,François James,Loïc Rousseau

2024-08-13

Abstract:We introduce a system of Saint-Venant-type equations to model laboratory experiments of dam-break particle-laden flows. We explore homogeneous and non-cohesive liquid-solid suspensions of monodispersed glass beads that propagate as single-phase flows, forming a progressively growing deposit of particles at the bottom of a smooth channel and creating a thin layer of pure liquid at the surface. The novelty of this model is twofold. First, we fully characterize the first-order behavior of these flows (mean velocity, runout distances and deposits geometry) through the sole sedimentation process of the grains, thus avoiding the use of any artificial friction to stop the flow. The model remains very simple and turns out to be effective despite the complex nature of interactions involved in these phenomena. Secondly, the sedimentation dynamics of the grains is observed to not being mainly affected by the flow, but remains comparable to that measured in static suspensions. The mathematical model is validated by comparing the experimental kinematics and deposit profiles with the simulations. The results highlight that this simplified model is sufficient to describe the general features of these flows as well as their deposit morphology, provided that the settling rate is adjusted starting from a critical value of the Reynolds number where the flow agitation begins to significantly delay the mean sedimentation velocity.

Fluid Dynamics,Geophysics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to simulate and understand the dynamic behavior of dam - break particulate suspensions under laboratory conditions, especially the influence of the deposition process in these flows on the flow characteristics. Specifically, the researchers developed a three - layer model to describe the dam - break particulate suspension flow driven by sedimentation. This model aims to:

1. **Fully characterize the first - order behavior of these flows**: By only considering the sedimentation process of particles, the model can predict the average flow velocity, flow distance, and sediment geometry without introducing any artificial friction to stop the flow. This enables the model to effectively describe the main features of these complex phenomena while remaining simple.

2. **Explore the influence of sedimentation dynamics on the flow**: Research shows that the sedimentation dynamics of particles are mainly unaffected by the flow and are similar to the results measured in static suspensions. This means that during the flow process, the sedimentation velocity of particles remains basically constant and does not change significantly with time and space.

To achieve the above goals, the researchers designed a series of experiments to generate a uniform and non - cohesive water suspension of glass beads and observe its flow in a horizontal channel. Based on experimental observations, they proposed a three - layer depth - averaged model. This model assumes that the flow can be divided into three main stages: the initial collapse stage, the dominant propagation stage, and the final stop stage. The model also assumes that the flow structure can be divided into three different uniform layers: the bottom stationary sediment layer, the intermediate flowing suspension layer, and the upper pure water layer. Through these assumptions, the researchers constructed a set of mathematical equations to describe the evolution of the flow and solved them by numerical methods. The prediction results of the model were compared with the experimental data to verify the validity of the model.

In conclusion, the main contribution of this paper is to provide a simplified mathematical model that can accurately describe the basic characteristics of dam - break particulate suspension flows and their deposition patterns, especially in cases where the sedimentation process is dominant. This model is of great significance for understanding and predicting the flow behavior of similar geological disasters (such as debris flows).