Abstract:Despite the broad range of navigation, positioning, and timing services offered by the global navigation satellite system (GNSS), its signals are vulnerable to blockage and interference, leading to a degraded performance or even unavailability. In contrast to GNSS, ground-based navigation systems exhibit better layout flexibility and more efficient terrain adaptability in shaded areas, with their additional advantages of accurate station coordinates and the absence of ionospheric delay effects enabling precise point positioning. However, accurate inter-station time synchronization is thought to be necessary for the ground-based precise point positioning. Locata utilizes a proprietary TimeLoc technology for tight time synchronization, allowing the clock difference in the carrier phase measurement equation to be ignored. However, for other ground-based navigation systems, accurate time synchronization requires accurate calibration of equipment delays and thus significantly increases the difficulty of engineering implementation. Herein, we propose a new precise point positioning method that does not rely on accurate inter-station time synchronization. According to this method, the uncalibrated clock difference and the integer carrier phase ambiguity are combined into a new ambiguity parameter, with the ambiguity and position coordinates subsequently solved in two steps. Further, in order to overcome the limitations of the Locata on-the-fly algorithm and the conventional “known-point initialization” method, a new “dynamic key point initialization” method is proposed. Finally, a simulation test and an indoor field trial are conducted, demonstrating that precise point positioning can be achieved by sharing a single clock source without relying on accurate inter-station time synchronization. An atomic clock is not needed and an inexpensive crystal oscillator is sufficient to act as the shared clock. The results of indoor positioning tests reveal real-time centimeter-level accuracy.

Precise synchronization of a free-running Rubidium atomic clock with GPS Time for applications in experimental particle physics

Study of atom clock aiding GPS positioning

Remote atomic clock synchronization via satellites and optical fibers

Disciplining a Rubidium Atomic Clock Based on Adaptive Kalman Filter

GPS Time Synchronization in School-Network Cosmic Ray Detectors

A High Accuracy Time Keeping Scheme Based on GPS

Atomic clock performance enabling geodesy below the centimetre level

Measuring Time of Flight Using Satellite-Based Clocks

Atomic clock performance beyond the geodetic limit

GPS-based Precision Clock Online Frequency Calibration and Time Service

Geodesy and metrology with a transportable optical clock

Measuring absolute frequencies beyond the GPS limit via long-haul optical frequency dissemination

Generation of a precise time scale assisted by a near-continuously operating optical lattice clock

Real-Time Synchronization of Clocks at Femtosecond Level Through a 113 Km-Free-space Link

Preliminary experimental results of determining the geopotential difference between two synchronized portable hydrogen clocks at different locations

Long-Term Stability Analysis Toward <10−14 Level for a Highly Compact POP Rb Cell Atomic Clock

High-Resolution Frequency Measurement of the Ground-State Hyperfine Splitting of Cd-113(+) Ions

An Accurate Frequency Control Method and Atomic Clock Based on Coherent Population Beating Phenomenon

Precise point positioning for ground-based navigation systems without accurate time synchronization

Long-distance chronometric leveling with a portable optical clock