Abstract:Conventional current transformers (CTs) suffer from nonlinearities due to their ferromagnetic cores. On one hand, it is well-known that severe core saturation may occur because of large overcurrents or unidirectional transient components: this may substantially impact the operation of relays. On the other hand, weaker nonlinear effects are also present during regular working conditions. In particular, the spectral content of typical current waveforms is characterized by a strong fundamental term responsible for harmonic distortion affecting the frequency components at the secondary side. In turn, this has a significant impact on the accuracy that can be reached as long as current harmonics must be monitored. The target of this work is implementing a simple signal processing technique that allows compensating for this effect. The method, characterized by extremely low computational complexity, is first introduced and validated using numerical simulations. After this, it was tested experimentally to improve the harmonic measurement capability of inductive CTs. The achieved results highlight a noticeable reduction of errors at low-order harmonics over a wide range of primary current amplitudes. It is worth noting that the black-box approach makes the technique suitable also for compensating nonlinearities introduced by current transducers based on different operating principles. Thanks to this peculiarity and to the low computational complexity, the proposed method is suitable to be employed in power quality analyzers and merging units. In this way, high-accuracy monitoring of current harmonics in power systems can be achieved, opening the way to advanced power quality management and to the location of disturbing users.

A Modular Measurement Integrity Verification for Transformer Currents with Applications in Hardware in-the-Loop Digital Twin

Digital Twin of Distribution Power Transformer for Real-Time Monitoring of Medium Voltage from Low Voltage Measurements

Digital Twin Based Condition Monitoring for High Power Converters

Study of the Heavy Direct Current Indirect Measurement and Calculation Based on the Waveform Measuring of Valve Currents

A New Method to Represent the Harmonic Measurement Accuracy of Current Transformers

A Simple Method for Compensating Harmonic Distortion in Current Transformers: Experimental Validation

A Novel Leakage-Current-Based Online Insulation Monitoring Strategy for Converter Transformers Using Common-Mode and Differential-Mode Harmonics in VSC System.

On-line Method for High-sensitivity Leakage Current Measurement of Converter-connected Transformers in Microgrids

Development of a high accuracy digital voltage transformer and a test bed supporting IEC 61850 and IEEE C37.118

The Design and Implementation of Electronic Transformer Calibration Device Based on Virtual Instrument Technology

Distributed Dual Model for High-Frequency Transformer Windings: Electromagnetic Transients and Solid State Transformers

Measurement Based Linear and Nonlinear Time Invariant Representations for High Voltage Inductive Transformer Frequency Response up to 10 kHz

Classification and Discrimination Among Winding Mechanical Defects, Internal and External Electrical Faults, and Inrush Current of Transformer

An Online Identification Method for Health State Parameters of Thyristor Modules in HVDC Converter Valve

A Novel Method for DC Current Measurement Using Current Transformer

Impedance Measurement Method for Obtaining the Accuracy of Current Transformers

Inherent Time-Delay Determination for Acquisition Module of Electronic Transformer

Fault diagnosis method for oil-immersed transformers integrated digital twin model

Design of A Transformer Oil Viscosity, Density, and Dielectric Constant Simultaneous Measurement System Based on A Quartz Tuning Fork

A Novel Method for Operation Monitoring of Thyristor Converter Based on Real‐Time Virtual Measurement of Valve Current in LCC‐HVDC