Abstract:The low probability of single event upsets (SEU) within particular satellite orbits, makes Commercial-off-the-shelf (COTS) electronic components a viable solution for space system implementation, thanks to the introduction of design-level fault tolerance techniques at the expense of some performance/energy/area penalty. This paper illustrates the design and validation of a novel RISC-V dual-core architecture, based on a computing paradigm that we refer to as full/partial heterogeneous multi-core protection. The approach relies on a small, low-performance, fully fault-tolerant core (LP core) coupled with a high-performance partially fault-tolerant core (HP core). The computing paradigm assumes the failure-exposed HP core executes computation intensive routines for relatively short periods of time, making the occurrence of failures a statistically unlikely situation, while the fully fault-tolerant LP core operates in critical control tasks and manages the failure recovery of the high-performance core. The execution time percentage in the LP core varies from a minimum of 11.4% up to a maximum of 91.3% while in the HP core it is between 8.7% and 88.6%, depending on the application. In the proposed study, both the cores belong to the RISC-V compliant Klessydra core family. The dual-core architecture also includes a watchdog timer controlled by the LP core and monitoring the non-protected HP core, and a context switch FIFO that speeds up the code and data switch between the two cores during failure recovery. A dedicated run-time software environment coordinates the execution of tasks on the high-performance core in a resilient fashion. The dual-core processor has been validated through extensive RTL simulations running in an UVM-based fault-injection environment, which emulates SEUs at various rates. Experimental results illustrate the benefits and limits obtained by using a heterogeneous architecture with different levels of protection and performance. The failure probability assuming a SEU fault occurrence can be reduced by a factor between 10X and 30X with respect to the non-protected architecture, leading to an average failure rate of up to 4.00E-06 per second with respect to 1.80E-05 per second in the non-protected architecture.

Design and Experimental Investigation of Trikarenos: A Fault-Tolerant 28nm RISC-V-based SoC

Trikarenos: A Fault-Tolerant RISC-V-based Microcontroller for CubeSats in 28nm

Neutron Irradiation Testing and Analysis of a Fault-Tolerant RISC-V System-on-Chip

Enhancing Fault Awareness and Reliability of a Fault-Tolerant RISC-V System-on-Chip

A RISC-V Fault-Tolerant Soft-Processor Based on Full/Partial Heterogeneous Dual-Core Protection

Fault tolerance evaluation study of a RISC-V microprocessor for HEP applications

Hybrid Hardening Approach for a Fault-Tolerant RISC-V System-On-Chip

DuckCore: A Fault-Tolerant Processor Core Architecture Based on the RISC-V ISA

Experimental evaluation of neutron-induced errors on a multicore RISC-V platform

STRV -- A radiation hard RISC-V microprocessor for high-energy physics applications

Hybrid Modular Redundancy: Exploring Modular Redundancy Approaches in RISC-V Multi-Core Computing Clusters for Reliable Processing in Space

An Eight-Core 1.44-GHz RISC-V Vector Processor in 16-nm FinFET

Design and Implementation of a Secure RISC-V Microprocessor

A near-threshold RISC-V core with DSP extensions for scalable IoT Endpoint Devices

A Kind of Low-cost Non-intrusive Autonomous Fault Emulation System

A 55nm 350mhz 328mw Secure RISC-V CPU for Lightweight Systems

SentryCore: A RISC-V Co-Processor System for Safe, Real-Time Control Applications

AnnikaCore: RISC-V Architecture Processor Design and Implementation for IoT

On-Demand Redundancy Grouping: Selectable Soft-Error Tolerance for a Multicore Cluster

Culsans: An Efficient Snoop-based Coherency Unit for the CVA6 Open Source RISC-V application processor

A RISC-V MCU with adaptive reverse body bias and ultra-low-power retention mode in 22 nm FD-SOI