Abstract:The low probability of single event upsets (SEU) within particular satellite orbits, makes Commercial-off-the-shelf (COTS) electronic components a viable solution for space system implementation, thanks to the introduction of design-level fault tolerance techniques at the expense of some performance/energy/area penalty. This paper illustrates the design and validation of a novel RISC-V dual-core architecture, based on a computing paradigm that we refer to as full/partial heterogeneous multi-core protection. The approach relies on a small, low-performance, fully fault-tolerant core (LP core) coupled with a high-performance partially fault-tolerant core (HP core). The computing paradigm assumes the failure-exposed HP core executes computation intensive routines for relatively short periods of time, making the occurrence of failures a statistically unlikely situation, while the fully fault-tolerant LP core operates in critical control tasks and manages the failure recovery of the high-performance core. The execution time percentage in the LP core varies from a minimum of 11.4% up to a maximum of 91.3% while in the HP core it is between 8.7% and 88.6%, depending on the application. In the proposed study, both the cores belong to the RISC-V compliant Klessydra core family. The dual-core architecture also includes a watchdog timer controlled by the LP core and monitoring the non-protected HP core, and a context switch FIFO that speeds up the code and data switch between the two cores during failure recovery. A dedicated run-time software environment coordinates the execution of tasks on the high-performance core in a resilient fashion. The dual-core processor has been validated through extensive RTL simulations running in an UVM-based fault-injection environment, which emulates SEUs at various rates. Experimental results illustrate the benefits and limits obtained by using a heterogeneous architecture with different levels of protection and performance. The failure probability assuming a SEU fault occurrence can be reduced by a factor between 10X and 30X with respect to the non-protected architecture, leading to an average failure rate of up to 4.00E-06 per second with respect to 1.80E-05 per second in the non-protected architecture.

A 55nm 350mhz 328mw Secure RISC-V CPU for Lightweight Systems

Design and Implementation of a Secure RISC-V Microprocessor

Power Side-Channel Attacks on Crypto-Core Based on RISC-V ISA for High-Security Applications

An energy-efficient crypto-extension design for RISC-V

A Heterogeneous RISC-V SoC for Confidential Computing and Password Recovery

Xuantie-910: A Commercial Multi-Core 12-Stage Pipeline Out-of-Order 64-Bit High Performance RISC-V Processor with Vector Extension : Industrial Product

A RISC-V MCU with adaptive reverse body bias and ultra-low-power retention mode in 22 nm FD-SOI

Design and Implementation of Low-Power IoT RISC-V Processor with Hybrid Encryption Accelerator

AnnikaCore: RISC-V Architecture Processor Design and Implementation for IoT

An Eight-Core 1.44-GHz RISC-V Vector Processor in 16-nm FinFET

A Hardware Security Evaluation Platform on RISC-V SoC

A low-complexity heterogeneous multi-core platform for security soc

DuckCore: A Fault-Tolerant Processor Core Architecture Based on the RISC-V ISA

Side-Channel Attacks on RISC-V Processors: Current Progress, Challenges, and Opportunities

SecureD: A Secure Dual Core Embedded Processor

The design and implement of a mobile security SoC

A High-Performance Domain-Specific Processor With Matrix Extension of RISC-V for Module-LWE Applications

Development an efficient AXI-interconnect unit between set of customized peripheral devices and an implemented dual-core RISC-V processor

Countermeasures Against Information Leakage Induced by Data Serialization Effects in a RISC CPU.

A RISC-V Fault-Tolerant Soft-Processor Based on Full/Partial Heterogeneous Dual-Core Protection

An Embedded RISC-V Core with Fast Modular Multiplication