Abstract:Porous structures are ubiquitous in many thermal management and energy conversion systems. The morphology of a porous structure has significant impact on the fluid flow, heat/mass transport, and strength performance. However, the available fabrication techniques are not capable of directly tailoring porous structures with well-controlled pore features and functional graded pore morphology, thereby limiting the performance enhancements for these systems. In this study, a triply periodic minimal surface (TPMS) based method was developed to customize the morphology of porous media with well-controlled pore features and to fabricate these parts with additive manufacturing. Porous structures with designed pore parameters were built based on the mathematically defined iWP surface, primitive surface, diamond surface and gyroid surface. Before performing flow and heat transfer simulations, morphological analysis was conducted to establish the connections between the geometrical parameters and the performance of the porous structure (flow resistance, heat transfer, and strength). The porous structures were compared in terms of their structural strength, specific pressure drop, interstitial/volumetric heat transfer coefficients and the ratio of the Colburn factor relative to the friction factor. The TPMS porous structures indicated that much higher strength than the simple cubic packing structure (approximation of sintered metal particles) due to their reasonable struct connectivity. Computations demonstrated that the type P structure had the lowest flow resistance and highest comprehensive heat transfer coefficient (j/f). The high specific surface area, continuous changes in the flow direction, periodic mixing/redistribution and flow acceleration contributed to the higher volumetric heat transfer coefficients in the type W/G structures.

Porosity and topological properties of triply periodic minimal surfaces

Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications

Isotropic Porous Structure Design Methods Based on Triply Periodic Minimal Surfaces

Persistent Homology-Driven Optimization of Effective Relative Density Range for Triply Periodic Minimal Surface

Prediction of Cellular Structure Mechanical Properties with the Geometry of Triply Periodic Minimal Surfaces (TPMS)

Porous scaffold design by solid T-splines and triply periodic minimal surfaces

Efficient Representation and Optimization for TPMS-Based Porous Structures

Heterogeneous Porous Scaffold Generation Using Trivariate B-spline Solids and Triply Periodic Minimal Surfaces

Layered Infill Area Generation from Triply Periodic Minimal Surfaces for Additive Manufacturing

Persistent Geometry-Topology Descriptor for Porous Structure Retrieval Based on Heat Kernel Signature

Multiscale Persistent Topological Descriptor for Porous Structure Retrieval.

Mechanical properties of porous materials based on new triply periodic and minimal surfaces

Prediction of Flow Properties of Porous Triply Periodic Minimal Surface (TPMS) Structures

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

Topology Optimization of Self-supporting Porous Structures Based on Triply Periodic Minimal Surfaces.

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

Mechanical properties of triply periodic minimal surface (TPMS) scaffolds: considering the influence of spatial angle and surface curvature

On the permeability of TPMS scaffolds

Minimal Twin Surfaces

Topology-controllable Implicit Surface Reconstruction Based on Persistent Homology