Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Theoretical Analysis of Fiber Arrangements for Improved Coupling Efficiency in the VBT High-Resolution Echelle Spectrograph

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Design for Enabling Echelle and OMR Spectrograph Observations for Point and Extended Sources on the Same Night at VBT

Broadband Optical Concentration Technology Based on Grating Side-Coupling

Seeing-limited Coupling of Starlight into Single-mode Fiber with a Small Telescope

Simulations of a High-Contrast Single-Mode Fiber Coronagraphic Multi-Object Spectrograph for Future Space Telescopes

Fiber Assignment in Next-generation Wide-field Spectrographs

Optimization of telescope focal ratios for MLA-fiber coupled Integral Field Units

The need for single-mode fiber-fed spectrographs

A multi-functional fiber positioning system for Extremely Large Telescopes

Fiber Assignment for Multi-Object Fiber-Fed Spectrographs

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy

Light scrambling and focal ratio degradation of thin multimode fibers with different core geometries

Single mode, extreme precision Doppler spectrographs

Analysis of the Coupling Efficiency of a Dual-Fiber Spherical Coupler and Improvement of the Coupling Efficiency with a Polished Spherical Coupler

Stability analysis of VBT Echelle spectrograph for precise radial velocity measurements

Improving Fiber Coupling Efficiency by Shaping the Transmission Trajectory of the Vortex Beam

New telescope designs suitable for massively-multiplexed spectroscopy

Simulation Analysis of the Photographic Noncoincidence Between Fiber Ends and Light Spots under Integrating Sphere Light Source

Higher dispersion and efficiency Bragg gratings for optical spectroscopy