Abstract:High-power multicycle THz radiation is highly sought after with applications in medicine, imaging, spectroscopy, characterization and manipulation of condensed matter, and could support the development of next-generation compact laser-based accelerators with applications in electron microscopy, ultrafast X-ray sources and sub-femtosecond longitudinal diagnostics. Multicycle THz-radiation can be generated by shooting an appropriate laser through a periodically poled nonlinear crystal, e.g. lithium niobate (PPLN). Unfortunately, the manufacturing processes of PPLNs require substantially strong electric fields $\mathcal{O}(10~kV/mm)$ across the crystal width to locally reverse the polarization domains; this limits the crystal apertures to below 1 cm. Damage threshold limitations of lithium niobate thereby limits the laser power which can be shone onto the crystal, which inherently limits the production of high-power THz pulses. Here we show that in the THz regime, a PPLN crystal can be mechanically constructed in-air by stacking lithium niobate wafers together with 180$^{\circ}$ rotations to each other. The relatively long (mm) wavelengths of the generated THz radiation compared to the small gaps ($\sim$10 $\mu$m) between wafers supports a near-ideal THz transmission between wafers. We demonstrate the concept using a Joule-class laser system with $\sim$50 mm diameter wafers and measure up to 1.3 mJ of THz radiation corresponding to a peak power of $\sim$35 MW, a 50 times increase in THz power compared to previous demonstrations. Our results indicate that high-power THz radiation can be produced with existing and future high-power lasers in a scalable way, setting a course toward multi-gigawatt THz pulses. Moreover the simplicity of the scheme provides a simple way to synthesize waveforms for a variety of applications.

Single-cycle, 643-mW average power THz source based on tilted pulse front in lithium niobate

Single-cycle, MHz repetition rate THz source with 66 mW of average power

High-power intracavity single-cycle THz pulse generation using thin lithium niobate

Near-optimal intense and powerful terahertz source by optical rectification in lithium niobate crystal

400 kHz repetition rate THz-TDS with 24 mW of average power driven by a compact industrial Yb-laser

1.4-mJ High Energy Terahertz Radiation from Lithium Niobates

Optical rectification of a 100 W average power mode-locked thin-disk oscillator

35 megawatt multicycle THz pulses from a homemade periodically poled macrocrystal

Generation of 13.9‐mJ Terahertz Radiation from Lithium Niobate Materials

Microstructured large-area photoconductive terahertz emitters driven at high average power

Single-cycle Megawatt Terahertz Pulse Generation from a Wavelength-Scale Plasma Oscillator Driven by Ultrashort Laser Pulses

High-average-power, 2-μm femtosecond optical parametric oscillator synchronously pumped by a thin-disk, mode-locked laser.

High-power single-cycle THz emission from large-area photoconductive emitters at 400 kHz

An efficient high-power femtosecond laser based on periodic-layered-Kerr media nonlinear compression and a Yb:YAG regenerative amplifier

3-Ghz, Ultrafast Yb-fiber Laser Sources: Closing the Spectral Gaps

High-power 55-fs Yb:YAG thin-disk oscillator at 200 MHz repetition rate

Half-kilowatt high energy third harmonic conversion to 50 J @ 10 Hz at 343 nm

THz pulses over 50 millijoules generated from relativistic picosecond laser-plasma interactions

Gas-plasma based generation of broadband THz radiation with 640 mW average power

High-power femtosecond molecular broadening and the effects of ro-vibrational coupling

High average power amplification of femtosecond pulses based on the Yb:CaYAlO4 crystal