Room-temperature photonic quantum computing in integrated silicon photonics with germanium-silicon single-photon avalanche diodes

Neil Na,Chou-Yun Hsu,Erik Chen,Richard Soref

2024-08-26

Abstract:Most, if not all, photonic quantum computing (PQC) relies upon superconducting nanowire single-photon detectors (SNSPDs) based on niobium (Nb) operated at a temperature < 4 K. This paper proposes and analyzes 300 K waveguide-integrated germanium-silicon (GeSi) single-photon avalanche diodes (SPADs) based on the recently demonstrated normal-incidence GeSi SPADs operated at room temperature, and shows that their performance is competitive against that of SNSPDs in a series of metrics for PQC with a reasonable time-gating window to resolve the issue of dark-count rate (DCR). These GeSi SPADs become photon-number-resolving avalanche diodes (PNRADs) by deploying a spatially-multiplexed M-fold-waveguide array of M GeSi SPADs. Using on-chip waveguided spontaneous four-wave mixing (SFWM) sources and waveguided field-programmable interferometer mesh (FPIM) circuits, together with the high-metric SPADs and PNRADs, high-performance quantum computing at room temperature is predicted for this PQC architecture.

Quantum Physics,Instrumentation and Detectors

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a photonic quantum computing (PQC) system that can operate at room temperature, especially by using germanium - silicon (GeSi) single - photon avalanche diodes (SPADs) integrated in silicon photonic waveguides. Traditional photonic quantum computing relies on superconducting nanowire single - photon detectors (SNSPDs) that need to operate at extremely low temperatures (usually < 4K), which limits their practical applications. This paper proposes a new "room - temperature PQC paradigm", using the recently demonstrated normal - incidence GeSi SPADs, which can operate at 300K, and shows that their performance on a series of PQC performance metrics can be comparable to that of SNSPDs, especially solving the problem of dark count rate (DCR) within a reasonable time - gating window.

### Main contributions:
1. **Proposing a new type of detector**: The article introduces the design and optimization of waveguide - integrated GeSi SPADs that operate at room temperature, especially by using multimode interference (MMI) and aluminum back - reflectors to improve the quantum efficiency (QE), making the QE in the C and O bands exceed 95%.
2. **Performance analysis**: Through finite - difference time - domain (FDTD) simulations, the structural parameters of GeSi SPADs, such as coupler length, Ge absorption layer length, and gap length, are optimized to achieve high QE.
3. **Dark count rate (DCR) estimation**: Based on the existing experimental data, the DCR of waveguide GeSi SPADs is estimated, and it is shown that the DCR at 1V and 2V over - voltages are approximately 0.8 MHz and 1.6 MHz respectively.
4. **Performance benchmarking**: New performance metrics suitable for PQC are proposed and compared with low - temperature SNSPDs. The results show that on some key metrics, the performance of room - temperature GeSi SPADs is comparable to or better than that of low - temperature SNSPDs.
5. **Future prospects**: The possibility of realizing PQC at mid - infrared (MIR) wavelengths and potential solutions using GeSn - based detectors are discussed.

### Key formulas:
- **Single - photon detection probability**:
\[
P_{\text{click}}=\sum_{k = 0}^{N}\binom{N}{k}P_{\text{DC}}^k(1 - P_{\text{DC}})^{N - k}\left(1-(1 - P_{\text{PC}})^{M - k}\right)
\]
where \(P_{\text{DC}}\) is the dark count probability, \(P_{\text{PC}}\) is the photon count probability, \(M\) is the number of SPADs, and \(N\) is the number of photons.

- **Probability of successful detection**:
\[
P_{\text{success}}=\sum_{k = 0}^{N}\binom{N}{k}P_{\text{DC}}^k(1 - P_{\text{DC}})^{N - k}\left(1-(1 - P_{\text{PC}})^{M - k}\right)\frac{(1 - P_{\text{DC}})^{M - k}}{(1 - P_{\text{DC}})^{M - k}+P_{\text{DC}}}
\]

- **Detection fidelity**:
\[
F=\frac{P_{\text{success}}}{P_{\text{click}}}\approx1-\frac{N R_{\text{DC}}T_{\text{G}}}{\eta_{\text{SPD}}}
\]
where \(R_{\text{DC}}\) is the dark count rate, \(T_{\text{G}}\) is the time - gating window, and \(\eta_{\text{SPD}}\) is the single - photon detection efficiency.

### Conclusion:
This paper shows that by using room - temperature GeSi SPADs, photonic quantum computing can be achieved without sacrificing performance, thus providing new possibilities for future PQC systems. This progress is expected not only to reduce the cost and complexity of quantum computing.